西部某水电站坝区采空区的工程效应研究

通过对西部某水电站的地质环境分析,揭示了采空区分布特征.对溢洪道进行数值模拟,研究采空区上覆岩层的影响范围,分析采空区对溢洪道的影响.最后综合分析采空区对水电站不同工程部位的危害,提出相应的处理措施.     

Joint probability density function of the stochastic responses of nonlinear structures

The joint probability density fimction （PDF） of different structural responses is a very important topic in the stochastic response analysis of nonlinear structures. In this paper, the probability density evolution method, which is successfully developed to capture the instantaneous PDF of an arbitrary single response of interest, is extended to evaluate the joint PDF of any two responses. A two-dimensional partial differential equation in terms of the joint PDF is established. The strategy of selecting representative points via the number theoretical method and sieved by a hyper-ellipsoid is outlined. A two-dimensional difference scheme is developed. The free vibration of an SDOF system is examined to verify the proposed method, and a flame structure exhibiting hysteresis subjected to stochastic ground motion is investigated. It is pointed out that the correlation of different responses results from the fact that randomness of different responses comes from the same set of basic random parameters involved. In other words, the essence of the probabilistic correlation is a physical correlation.     

Application of saddlepoint approximation in reliability analysis of dynamic systems

The application of the saddlepoint approximation to reliability analysis of dynamic systems is investigated. The failure event in reliability problems is formulated as the exceedance of a single performance variable over a prescribed threshold level. The saddlepoint approximation technique provides a choice to estimate the cumulative distribution function (CDF) of the performance variable. The failure probability is obtained as the value of the complement CDF at a specif ied threshold. The method requires computing the saddlepoint from a simple algebraic equation that depends on the cumulant generating function (CGF) of the performance variable. A method for calculating the saddlepoint using random samples of the performance variable is presented. The applicable region of the saddlepoint approximation is discussed in detail. A 10-story shear building model with white noise excitation illustrates the accuracy and effi ciency of the proposed methodology.     

基于Hv方法的三轴液压振动系统频响函数估计的研究

三轴液压振动系统是实验室内模拟振动环境的主要设备,其主要功能是精确地复现给定的功率谱和时间历程。振动控制技术是实现这一目标的关键技术,它以频响函数估计为基础。频响函数估计的精度影响控制过程的快速性和稳定性。本文对几种典型的频响函数估计方法进行了分析,针对传统方法精度低且受到矩阵病态条件约束等缺点,应用特征分析与摄动理论构造了一种多入多出的Hv方法,并且应用三轴液压振动系统的实测数据对其进行了检验。结果表明该方法是适用的。     

Morlet 小波用于环境激励下的模态参数识别研究

本文分别从卷积和Parseval定理的角度推导了非正交小波变换系数的实用计算方法。在环境激励下以互相关函数代替系统的自由响应数据,给出了基于Morlet小波变换的频率、阻尼比的参数识别方法,重点介绍了基于最小二乘法的振型识别技术。采用2层楼仿真算例和潮白河桥应用实例验证本算法,识别结果表明基于Morlet小波变换的模态参数识别技术能够有效地识别出环境激励下系统的模态参数。     

断陷盆地缓坡带河流沉积砂体定量表征及控制因素分析:以霸县凹陷文安斜坡东营组三段为例

断陷湖盆缓坡河流成因砂体是重要的油气储集单元.根据岩心观察、钻井岩/电特征并结合地震沉积学方法,分析断陷湖盆缓坡河流沉积体系和砂体时空分布特征,能为油气精细勘探提供可靠的依据.研究表明,霸县凹陷文安斜坡中部东营组三段周期性地发育4条呈NE-SW辫-曲复合型河流沉积,由河道沉积、砂坝沉积和泛滥平原沉积3种亚相以及辫状河道...     

新疆森林公园的分布及旅游开发初探

新疆森林公园的分布以山地为主,平原为辅,主要集中在天山北坡和阿尔泰山;树种等资源在山地主要有雪岭云杉,新疆落叶松,新疆冷杉等针叶林,平原则主要以胡杨、灰杨等荒漠湖岸林为主,并分布着多种新疆特色的灌木,新疆森林公园起步较晚,但数量稳步增长,并已根据不同层次的需求,进行旅游开发建设,发展势头良好。通过对新疆森林公园的数量、级别、面积及建设时间等基本情况进行分析,进一步对新疆森林公园的现状及功效分析,得出进一步更好的发展森林公园的必要性。最后,提出抓住森林公园“天然养吧”等资源优势,结合龙头景区,因地制宜开发建设,并在开展旅游活动中突出地方特色,不断完善森林公园管理规范,实现资源永续利用的发展建议。     

Numerical analysis of the effect of natural microcracks on the supercritical CO2 fracturing crack network of shale rock based on bonded particle models

The problem of predicting the geometric structure of induced fractures is highly complex and significant in the fracturing stimulation of rock reservoirs. In the traditional continuous fracturing models, the mechanical properties of reservoir rock are input as macroscopic quantities. These models neglect the microcracks and discontinuous characteristics of rock, which are important factors influencing the geometric structure of the induced fractures. In this paper, we simulate supercritical CO₂ fracturing based on the bonded particle model to investigate the effect of original natural microcracks on the induced‐fracture network distribution. The microcracks are simulated explicitly as broken bonds that form and coalesce into macroscopic fractures in the supercritical CO₂ fracturing process. A calculation method for the distribution uniformity index (DUI) is proposed. The influence of the total number and DUI of initial microcracks on the mechanical properties of the rock sample is studied. The DUI of the induced fractures of supercritical CO₂ fracturing and hydraulic fracturing for different DUIs of initial microcracks are compared, holding other conditions constant. The sensitivity of the DUI of the induced fractures to that of initial natural microcracks under different horizontal stress ratios is also probed. The numerical results indicate that the distribution of induced fractures of supercritical CO₂ fracturing is more uniform than that of common hydraulic fracturing when the horizontal stress ratio is small.     

Screening the current soil drainage class map of Flanders (Belgium) for its predictive quality

The predictive quality of the current drainage class map of Flanders was evaluated using data from two monitoring networks: one with good spatial coverage but poor temporal coverage and another with better temporal but poor spatial coverage. We combine both networks to obtain 1678 point predictions for mean highest water (MHW) and mean lowest water (MLW) tables by applying time series modelling and total least squares regression. The resulting MHW and MLW point data set was used to evaluate the currency of the existing map and to identify regional differences. The quality of the current map is moderate, and large differences occur between regions. Especially the Campine region shows large and systematic differences, whereas the southeastern hills and chalk–loam region is relatively accurate. If more weight is given to errors in the wetter drainage classes, about 50% of the area of Flanders would benefit from remapping. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical analysis of frost effects in porous media. Benefits and limits of the finite element poroelasticity formulation

The aim of this paper is to analyse the performance of a finite element formulation usable for predicting the mechanical consequences of frost effects on porous media. It considers the characteristics of porous media and how the frost action can be assessed. The problem is then separated into two parts: thermal and poromechanical calculations. The constitutive equations developed in the framework of poromechanics are presented and the implementation in a usual finite element poroelasticity formulation based on Zuber's method is adopted. An analysis of the time‐step influence on the convergence rate is given and leads us to propose a simple method in order to obtain objectivity of the finite element response and avoid over‐long calculations. Frost effect simulations are carried out on real porous media (two fired clays) as a case study. Although the experimental behaviour of the porous media subjected to frost action is in accordance with some observations, the calculated strains appear to be overestimated compared with measurements. The problem could be largely attributable to the difficulty of assessing permeability evolution during frost development. Copyright © 2011 John Wiley & Sons, Ltd.