黄河（山东段）悬河稳定性评价

通过黄河（山东段）悬河稳定性影响因素分析,各河段都有决口失稳的可能。该文从区域地壳稳定性、堤基稳定性、河道稳定性3个方面,采用模糊数学综合评判法进行悬河稳定性评价,对河段可能出现的失稳或决口险点及其可能造成的危害性进行分析和预测,初步确定了10处地质险段。     

Particle trajectories of nonlinear gravity waves in deep water

The paper presents a numerical method for calculating the particle trajectories of nonlinear gravity waves in deep water. Particle trajectories, mass-transport velocity and Lagrangian wave period can be accurately determined by the proposed method. The high success rate of the proposed method is examined by comparing the present results with those of (a) Longuet-Higgins, M.S., 1986, 1987. Eulerian and Lagrangian aspects of surface waves. Journal of Fluid Mechanics 173, 683-707 and (b) Lagrangian moments and mass transport in Stokes waves. Journal of Fluid Mechanics 179, 547-555. It is shown that the dimensionless mass-transport velocity can exceed 10% for large waves, and the Lagrangian wave period is much larger than the Eulerian wave period for large waves.     

Three-dimensional liquid sloshing in a tank with baffles

A numerical model has been developed to study three-dimensional (3D) liquid sloshing in a tank with baffles. The numerical model solves the spatially averaged Navier-Stokes equations, which are constructed on a non-inertial reference frame having six degree-of-freedom (DOF) of motions. The large-eddy-simulation (LES) approach is employed to model turbulence by using the Smagorinsky sub-grid scale (SGS) closure model. The two-step projection method is employed in the numerical solutions, aided by the Bi-CGSTAB technique to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate volume-of-fluid (VOF) method is used to track the distorted and broken free surface. The baffles in the tank are modeled by the concept of virtual boundary force (VBF) method. The numerical model is first validated against the available analytical solution and experimental data for two-dimensional (2D) liquid sloshing in a tank without baffles. The 2D liquid sloshing in tanks with baffles is then investigated. The numerical results are compared with other results from available literatures. Good agreement is obtained. Finally, the model is used to study 3D liquid sloshing in a tank with vertical baffles. The effect of the baffle is investigated and discussed.     

Implementation of baroclinic terms in a three-dimensional hydrodynamic model and its application to Anzali Port, Iran

Baroclinic terms have been implemented in a three-dimensional fully hydrodynamic model developed by Badiei et al. [2008. A three-dimensional non-hydrostatic boundary fitted model for free surface flows. International Journal for Numerical Methods in Fluids, 56(6), 607-627] modifying its momentum equations to account for density gradients and utilizing the scalar (salinity, temperature, etc.) conservation equation (SCE) and a state equation for the calculation of density. In the solution of advection-diffusion terms of the governing Navier-Stokes equations (NSE) and SCE, a symmetric splitting method was applied to ensure the long-term stability of simulations. Correction terms proposed by Ruddic et al. (1995) were applied to SCE to ensure the conservation of the scalar quantity. In the presence of baroclinic terms, the zero gradient pressure in the vertical direction in the vicinity of surface and bottom boundaries assumed by Badiei et al. [2008. A three-dimensional non-hydrostatic boundary fitted model for free surface flows. International Journal for Numerical Methods in Fluids, 56(6), 607-627] created spurious currents. This problem was solved by assuming a hydrostatic pressure variation at those boundaries. The ability of extended model was validated by comparing its results with an experimental test case. The simulation of hydrodynamic and salt intrusion at Anzali Port located at the southern coasts of Caspian Sea in Iran was carried out by the model with both barotropic and baroclinic modes. The simulated results with baroclinic mode show a better agreement with measured data as compared to the results of barotropic mode that clearly demonstrate the significance of baroclinic terms in the simulation of cyclic intrusion of salt wedge into the Port Basin.     

Implementation of the European Water Framework Directive: Natural variability associated with the CARLIT method on the rocky shores of the Ligurian Sea (Italy)

The Water Framework Directive (WFD) 2000/60/EC, adopted by the European Community in 2000 with the goal of maintaining and improving the aquatic environments, requires that member states achieve and maintain a good ecological status of all water bodies by 2015. In the marine context, the ecological status has to be quantified applying indexes based on appropriate key biological elements, which allow the categorization of water bodies into five Ecological Status (ES) classes. The CARLIT index is a cartographic monitoring tool enabling the Ecological Quality Ratio (EQR) to be calculated using macroalgae in coastal hard bottoms as a key biological element; at present it is being applied in Spain, France and Italy. To detect actual changes of water quality and, consequently, rely on the application of indexes for the assessment of the ecological status in the marine environment, it is necessary to evaluate their sensitivity to natural variability at different temporal and spatial scales. In this study we present a first quantification of natural (spatial and temporal) variability of EQR‐CARLIT quality assessment in 2006 and 2007 along the Ligurian coast (North‐Western Mediterranean, Italy). The EQR‐CARLIT values recorded along the Ligurian coastline show that natural variability of EQR‐CARLIT is low and that it does not affect the attribution of a given stretch of coast to a particular ES class, in agreement with the major human pressures acting in the area (urbanization, river load, sea‐farming). A small‐scale variability was detected, strengthening the use of cartography of the whole rocky shore, whenever possible, or, alternatively, the assessment of the ecological status for long stretches of coast, to encompass the small‐scale variability due to local factors.     

Nonlinear numerical simulation on extreme-wave kinematics

A fully nonlinear numerical model based on a time-domain higher-order boundary element method (HOBEM) is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here.     

Detection of nighttime sea fog/stratus over the Huanghai Sea using MTSAT-1R IR data

A dual channel difference (DCD) method is applied to detect nighttime sea fog/stratus over the Huanghai Sea using the infrared (IR) data of shortwave (3.5–4.0 μm) and longwave (10.3–11.3 μm) channels from the Multi-functional Transport Satellite (MTSAT)-1R, i.e., shortwave minus longwave brightness temperature difference (SLTD). Twenty-four sea fog events over the Huanghai Sea during March to July of 2006 and 2007 are chosen to determine a suitable value of SLTD for nighttime sea fog/stratus detection, and ...     

Impacts of maintenance channel dredging in a northern Adriatic coastal lagoon. I: Effects on sediment properties,contamination and toxicity

Conservation and management of coastal lagoons envisage direct human intervention. To prevent siltation and to preserve the hydrodynamics features of the lagoon system, the inner channels undergo regular maintenance dredging.     

Winkler's method overestimates dissolved oxygen in seawater: Iodate interference and its oceanographic implications

Dissolved oxygen in seawater has been determined by using the Winkler's reaction scheme for decades. An interference in this reaction scheme that has been heretofore overlooked is the presence of naturally occurring iodate in seawater. Each mole of iodate can result in an apparent presence of 1.5 mol of dissolved oxygen. At the concentrations of iodate in the surface and deep open ocean, it can lead to an overestimation of 0.52 ± 0.15 and 0.63 ± 0.05 μmol kg^− 1 of oxygen in these waters respectively. In coastal and inshore waters, the effect is less predictable as the concentration of iodate is more variable. The solubility of oxygen in seawater was likely overestimated in data sources that were based on the Winkler's reaction scheme for the determination of oxygen. The solubility equation of García and Gordon [Garcia H.E., Gordon, L.I., 1992. Oxygen solubility in seawater: Better fitting equations. Limnol. Oceanogr. 37, 1307–1312] derived from the results of Benson and Krause [Benson, F.B., Krause, D. Jr., 1984. The concentration and isotopic fractionation of oxygen dissolved in freshwater and seawater in equilibrium with the atmosphere. Limnol. Oceanogr. 29, 620–632] is free from this source of error and is recommended for general use. By neglecting the presence of iodate, the average global super-saturation of oxygen in the surface oceans and the corresponding efflux of oxygen to the atmosphere both have been overestimated by about 8%. Regionally, in areas where the degree of super-saturation or under-saturation of oxygen in the surface water is small, such as in the tropical oceans, the net air–sea exchange flux can be grossly under- or overestimated. Even the estimated direction of the exchange can be reversed. Furthermore, the presence of iodate can lead to an overestimation of the saturation anomaly of oxygen in the upper ocean attributed to biological production by 0.23 ± 0.07%. AOU may have been underestimated by 0.52 ± 0.15 and 0.63 ± 0.05 μmol kg^− 1 in the surface mixed layer and deep water, while preformed phosphate and preformed nitrate may have been overestimated by 0.004 ± 0.001 and 0.06 ± 0.02 μmol kg^− 1 in the surface mixed layer, and 0.005 ± 0.0004 and 0.073 ± 0.006 μmol kg^− 1 in the deep water. These are small but not negligible corrections, especially in areas where the values of these parameters are small. At the increasing level of sophistication in the interpretation of oxygen data, this source of error should now be taken into account. Nevertheless, in order to avoid confusion, an internationally accepted standard needs to be adopted before these corrections can be applied.     

Modified Moving Particle Semi-implicit methods for the prediction of 2D wave impact pressure

As a gridless particle method, the MPS (Moving Particle Semi-implicit) method has proven useful in a wide variety of engineering applications including free-surface hydrodynamic flows. Despite its wide range of applicability, the MPS method suffers from some shortcomings such as non-conservation of momentum and spurious pressure fluctuation. By introducing new formulations for the pressure gradient and a new formulation of the source term of the Poisson Pressure Equation (PPE), and by allowing a slight compressibility, we have proposed modified MPS methods for the prediction of wave impact pressure on a coastal structure. The improved performance of the modified methods is shown through the simulation of numerous wave impact problems (including the impacts by a dam break flow, a flip-through and two cases of slightly-breaking waves) in comparison with the experimental data.