Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

牙鲆鱼苗长途运输技术的试验研究

本实验对10个批次，总数为19047尾的不同规格和产地的牙鲆鱼苗长途运输效果进行了研究。结果表明，规格为9-12cm的鱼苗，在水温6－12℃，运输时间为35－50h，采用空运和低温活水车运输，运输死亡率为664尾，死亡率为3.39%，低温活水车短途运输是可行的，尽管长途车运方式成本较低，但由于应激强度较大，对鱼苗的生长性能影响较为严重，驯养10d累计死亡率最高达18.1%，这种模式不可取。低温（6℃）、小规格（9cm)的空运较适合牙鲆鱼苗长途运输。此外，本文还就运输应激反应、预防措施和药物防治进行详细的讨论。     

An Experi mental Study on Wave-Induced Dynamic Stresses in Seabed

1 .IntroductionEvery year ,Taiwanis subjectedtotwo or three typhoonintrusions in average which always causedisasters . Most of the disasters which occur around the coastal zone are due to seabed instability andcoastal structure destruction caused bytyphoo…     

褐藻胶裂解酶产生菌Vibro sp.QY102的发酵条件优化

对海洋来源的Vibro sp.QY102的产褐藻胶裂解酶的发酵条件进行研究。结果表明,该菌株最适液体培养基成分为(w/v):0.5%褐藻酸钠;0.4%蛋白胨;0.3%KH2PO4;0.7%K2HPO4.3H2O;2%NaCl;0.01%MgSO4.7H2O,pH=6.0。按3%的接种量接入培养基,30℃150 r/min振荡培养120 h,产酶达到10.2 U/mL,为优化前的4.5倍。Mg2 是该菌株产酶所必需的,这在其他褐藻胶裂解酶生产菌株中未见报道。该菌株产酶发酵条件的研究,为褐藻胶裂解酶的大规模制备及应用奠定了基础。     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

旧路改建高速公路中地基强夯效应测试与工艺参数分析

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。     

广西大厂超大型锡矿的形成条件与成矿模式

超大型矿床的形成条件有其特殊性.大厂超大型锡矿产出于南丹-昆仑关基底性深大断裂带上,经过多旋回构造-岩浆活动使矿质继承叠加,最后聚积于燕山晚期的岩浆热液中.大厂超大型锡矿床是各种成矿因素良好匹配,并经长时期的多重富集综合作用的结果.     

下庄矿田湖子地区铀矿找矿方向探讨

湖子地区位于NNE向诸广-新兴铀成矿带与近EW向大东山-漳州大断裂复合部位,是华南早、晚两期铀成矿热液活动叠加区、放射性高场区,既有"硅化带大脉"型铀矿产出,又有"交点"型铀矿存在,找矿前景良好.文章在论述下庄矿田铀成矿地质环境、铀成矿特征及铀矿定位条件基础上,分析了湖子地区铀成矿条件与找矿前景,指出该区今后铀矿找矿方向是:① 6009号硅化断裂带,在其北段找硅化带大脉型铀矿,在其南段找"交点"型铀矿;②新桥-下庄硅化断裂带和6009号带之间成矿部位,寻找硅化带型和"交点"型铀矿;③NW向、近EW向辉绿岩脉与NNE向、NE向构造交汇部位(交点),寻找"交点"型铀矿.     

三峡库区高切坡致灾因素及防护对策——以重庆市万州区为例

三峡库区百万移民的搬迁建设导致大量高切坡的形成。未及时治理或治理不当的高切坡,不同程度地发生破坏,影响了人们的正常生活,甚至引发了地质灾害。因此,科学认识及治理高切坡十分必要。重庆市万州区高切坡主要有风化及差异风化、崩塌和土体滑塌等破坏形式。影响破坏的因素主要为工程地质条件、气候及时间效应。针对高切坡不同的破坏形式,以安全、经济及环境和谐的人文理念作为设计指导思想,充分论证了高切坡的防护方案,即：削坡、排水以及格构防护较适合万州区高切坡的防护。这些措施,既能很好地解决高切坡的防护问题,又能兼顾环保、降低造价。研究结果可以作为三峡地区高切坡类地质灾害防护设计的参考。也可为其它流域类似问题借鉴。