Observations of Dynamic Turbulence in the Lower Stratosphere over Inner Mongolia Using a High-resolution Balloon Sensor Constant Temperature Anemometer

We present characterizations of the dynamic turbulence in the lower stratosphere measured by a new balloon-based system designed for detecting finer scale dynamic turbulence. The balloon-based system included a constant temperature anemometer(CTA) operating at a sampling rate of 2 k Hz at an ascent speed of 5 m s^-1(corresponding to a vertical resolution of 2.5 mm), an industrial personal computer, batteries, sensors for ambient temperature and humidity, an A/D converter, and others. The system was successfully launched to 24 km altitude over Bayannur City, Inner Mongolia Province. Results show the spatial intermittence of the turbulence layers, with clear boundaries between turbulent and nonturbulent regions. This is the first time that the dynamic turbulence spectrum down to the viscous sub-range has been obtained throughout the lower stratosphere over China. With that, the energy dissipation rates of dynamic turbulence could be calculated with high precision. The profile of the dissipation rates varied from 7.37 × 10^-7 to 4.23 W kg^-1 and increased with altitude in the stratosphere.     

Laboratory study of deep-water breaking waves

In an attempt to elucidate the mechanics of deep-water wave breaking, a variety of breaking waves, including spilling and plunging waves, of different length scales and geometries was studied. The waves were generated through wave-wave interactions using wave packets with constant-steepness components, constant-amplitude components, and also components following the Pierson-Moskowitz distribution. Wave steepening prior to breaking were found to cause an increase in the high frequency spectral slope of the wave spectrum. The slopes were correlated to the type of breaking and the intensity of the breaking. The energy loss through breaking varied with the spectral characteristics of the wave packet. On the other hand, it was also noted that, irrespective of the wave packet, the losses were from the higher frequency end of the first harmonics.     

Effects of rainfall on oil droplet size and the dispersion of spilled oil with application to Douglas Channel,British Columbia,Canada

Raindrops falling on the sea surface produce turbulence. The present study examined the influence of rain-induced turbulence on oil droplet size and dispersion of oil spills in Douglas Channel in British Columbia, Canada using hourly atmospheric data in 2011–2013. We examined three types of oils: a light oil (Cold Lake Diluent - CLD), and two heavy oils (Cold Lake Blend - CLB and Access Western Blend - AWB). We found that the turbulent energy dissipation rate produced by rainfalls is comparable to what is produced by wind-induced wave breaking in our study area. With the use of chemical dispersants, our results indicate that a heavy rainfall (rain rate > 20 mm h^? 1) can produce the maximum droplet size of 300 μm for light oil and 1000 μm for heavy oils, and it can disperse the light oil with fraction of 22–45% and the heavy oils of 8–13%, respectively. Heavy rainfalls could be a factor for the fate of oil spills in Douglas Channel, especially for a spill of light oil and the use of chemical dispersants.     

Cyclic behavior and failure mechanism of self‐centering energy dissipation braces with pre‐pressed combination disc springs

A new type of bracing system composed of friction energy dissipation devices for energy dissipation, pre‐pressed combination disc springs for self‐centering and tube members as guiding elements is developed and experimentally studied in this paper. The mechanics of this system are explained, the equations governing its hysteretic responses are outlined and large‐scale validation tests of two braces with different types of disc springs are conducted under the condition of low cyclic reversed loading. The experimental results demonstrate that the proposed bracing system exhibits a stable and repeatable flag‐shaped hysteretic response with an excellent self‐centering capability and effective energy dissipation throughout the loading protocol. Furthermore, the maximum bearing force and stiffness are predicted well by the equations governing its mechanical behavior. Fatigue and destructive test results demonstrate that the proposed bracing system can maintain stable energy dissipation and self‐centering capabilities under large deformation cyclic loading even when the tube members exceed the elastic limit and that a larger bearing capacity is achieved by the system that has disc springs without a bearing surface. Copyright © 2016 John Wiley & Sons, Ltd.     

基于传力路径的平面不规则RC框架结构减震设计

针对平面不规则RC框架结构,从构件安全层次出发提出基于传力路径的减震设计方法。首先根据广义结构刚度法的基本原理计算结构中所有构件的重要性系数,再假定消能支撑的截面参数,取每层最重要的构件位置布置支撑,经支撑在最不利地震组合下的轴力验算后确定支撑的最终设计参数和数量,然后考虑远场、近场有脉冲以及近场无脉冲地震动从双向输入对结构响应的影响,对减震前、后结构分别进行动力时程分析。分析结果表明,利用此方法优化布置支撑能为结构中重要构件提供有效保护,且在小、中、大震下消能支撑均能运作良好,使整体结构响应得到很好地控制。     

Seismic performance of buildings retrofitted with nonlinear viscous dampers and adjacent reaction towers

An effective strategy of seismic retrofitting consists of installing nonlinear viscous dampers between the existing building, with insufficient lateral resistance, and some auxiliary towers, specially designed and erected as reaction structures. This allows improving the seismic performance of the existing building without any major alteration to its structural and nonstructural elements, which makes this approach particularly appealing for buildings with heritage value. In this paper, the nonlinear governing equations of the coupled lateral‐torsional seismic motion are derived from first principles for the general case of a multistory building connected at various locations in plan and in elevation to an arbitrary number of multistory towers. This formulation is then used to assess the performance of the proposed retrofitting strategy for a real case study, namely, a 5‐story student hall of residence in the city of Messina, Italy. The results of extensive time‐history analyses highlight the key design considerations associated with the stiffness of the reaction towers and the mechanical parameters of the nonlinear viscous dampers, confirming the validity of this approach.     

新型扇形盘式消能器减震性能参数分析

提出了一种新型扇形盘式效能器(fanshaped disc-type energy dissipator,FDED),阐明了其原理、特点,导出其设计要点和设计理论,采用数值方法分析了FDED的减震性能,研究不同设计参数对FDED减震性能的影响。结果表明:FDED设计原理可行,减震机理明确,其转盘式的构造可起到有效的位移放大效果,使得消能器在小激励位移下发挥耗能作用;FDED具有明显的双线性恢复力特性和稳定的耗能性能,等效黏滞阻尼系数可达50%以上;阻尼件中橡胶硬度的改变对FDED初始刚度的影响不敏感,但对FDED屈服后刚度和等效黏滞阻尼系数的影响较为明显。随着橡胶硬度的增大,FDEDE的屈服后刚度上升,等效黏滞阻尼系数降低;保持阻尼层中橡胶层的总厚度不变,通过增减叠层钢板改变单层橡胶层的厚度对于调整FDED的减震性能影响不大;调整铅芯直径的大小主要影响FDED的屈服力和耗能性能。随着铅芯直径的增大,FDED的屈服力也增大,耗能能力逐渐提高。     

部分预制型钢混凝土梁抗震性能试验研究

为探究部分预制型钢混凝土梁的抗震性能,进行了7个部分预制型钢混凝土梁试件的拟静力试验,研究了试件的裂缝开展过程、破坏形态、承载能力、延性、耗能能力和刚度退化情况,探究预制截面模式、剪跨比和后浇混凝土强度等对其抗震能力的影响。结果表明:地震作用下,该7个试件力学性能较好,剪跨比是影响试件抗震性能的首要要素,剪跨比大的试件耗能能力强,型钢约束部分混凝土可以提高试件的耗能能力,截面模式和后浇混凝土强度对抗震性能影响不大。     

Study on a new shear wall system with shaking table test and finite element analysis

A new seismic energy dissipation shear wall structure is proposed in this paper. The new shear wall is one with purposely built‐in vertical slits within the wall panel, and rubber belts as seismic energy dissipation devices are installed in the vertical slits. In order to verify this concept, shaking table tests of a 10‐storey shear wall model with rubber belts filled in the vertical slits were carried out, and comparison of seismic behaviour was made between the new shear wall system and a shear wall with reinforced concrete connecting beams as energy dissipation. Furthermore, the seismic behaviour of this new shear wall is analysed by a finite element time history analysis method. The test and analysis show that the new shear wall system has a very good ability to dissipate seismic energy and is easy to use in engineering practice. Copyright © 2000 John Wiley & Sons, Ltd.     

利用高频天波返回散射反演电离层水平不均匀结构

高频天波返回散射探测作为重要的电离层探测手段,能够实现遥远区域电离层空间上的连续监测,探测获取的返回散射扫频电离图显示了探测频率-群路径-回波能量三者之间的关系.由于电离图包含了探测路径上的电离层状态信息,通过对其反演可以实时获取大面积范围的电离层参数.本文提出了一种基于解空间约束的返回散射前沿反演算法,能够重构电离层水平不均匀结构.针对反演非线性问题,采用Newton-Kontorovich方法进行求解,同时又引入了求解不适定问题的Tikhonov正则化方法,有益于解的稳定性和唯一性.利用模拟数据和实测数据分别对本文建立的算法进行了验证,并与Fridman和Fridman于1994年提出的反演方法进行了对比.结果表明,本文算法反演结果稳定,对返回散射前沿判读误差不敏感,与Fridman和Fridman 1994年方法相比,本文方法对电离层局部精细结构反演更加准确,具有较高的反演精度.本文提出的算法不但能够反演白天和夜间这种电离层较平稳时期的电离层状态,而且对于日出/日落时段等电子浓度分布变化较快情形下的电离层,也有很好的反演效果,表明了该算法在处理复杂多变的实际探测的返回散射电离图中的应用价值.