青岛沿海24种鱼类耳石秤量特征与鱼体大小关系

研究中经常会用测量耳石称量特征推算饵料鱼类的形态参数,而青岛沿海鱼类相关的研究较少,因此作者根据2015年3、5、8月3个航次在青岛近海的拖网调查数据,分析了捕获的24种共1002尾鱼的耳石秤量特征(耳石长、耳石宽和耳石质量)和鱼体大小(体长、体质量)的关系。结果表明,渔获24种鱼类分属5个目、14个科、24种鱼类的体长体质量呈显著幂函数相关,相关系数R~2的范围为0.779～0.997,幂指数b的范围为2.376～3.591,平均值为3.048±0.327,其中黄鲫(Setipinna taty)等11种鱼类的b值均大于3(P0.05),为正异速生长,其余13种鱼类的b值小于3(P0.05),呈负异速增长。耳石宽-鱼体长的相关性比耳石长-鱼体长的相关性要好,仅有3种鱼(饰鳍斜棘鱼衔(Repomucenus ornatipinnis)、矛尾虾虎鱼(Chaeturichthys stigmatias)和焦氏舌鳎Cynoglossus lighti)未呈现显著相关关系。在耳石质量-鱼体质量的相关关系中,9种鱼(如皮氏叫姑(Johnius belengerii)、扁斜棘?(Repomucenus planus)、石鲽(Kareius bicoloratus)呈显著相关(只是列举了一部分), 5种鱼(锦鳚(Pholis nebulosus)、矛尾虾虎鱼(Chaeturichthys stigmatias)、斑尾刺虾虎鱼(Synechogobius ommaturus)、焦氏舌鳎(Cynoglossus lighti))在现有样品情况下未呈现显著相关关系。     

涉密矢量数字地图中敏感要素几何信息量的测度方法

涉密矢量数字地图中敏感要素几何信息的定量测度,是实现定量化密级评定的基础和前提。如何进行敏感要素几何信息量的计算,目前尚缺乏相关研究。在现有地图信息论研究成果的基础上,论文主要开展了3方面的研究工作：首先,从地理对象的敏感性入手,探讨了地图要素敏感性的定义与要素集合的敏感性表征指标;然后,基于任意发生元的Voronoi构建方法,实现了对点要素集、线要素集、部分覆盖面要素集及综合要素集的信息单元自动化剖分;最后,基于长度系数、面积系数和角度系数,提出了线、面要素图形复杂度的计算方法,并在此基础上形成了涉密矢量数字地图中敏感几何信息量的测度方法。实验表明,该方法的计算结果遵循了信息量的非负性、连续性、可加性等特点,较为合理地反映了相关因素（地图比例尺、要素空间分布、要素图形复杂度、要素敏感系数等）对计算结果的影响。相关成果将支持矢量数字地图的定量化密级评定,并有助于完善地理信息安全监管的理论和方法体系。     

Storm surge induced flux through multiple tidal passes of Lake Pontchartrain estuary during Hurricanes Gustav and Ike

In September 2008, Hurricanes Gustav and Ike generated major storm surges which impacted the Lake Pontchartrain estuary in Louisiana. This paper presents analyses of in situ measurements acquired during these storm events. The main data used in the analyses were from three bottom mounted moorings equipped with conductivity, temperature, and depth sensors, acoustic Doppler current profilers (ADCPs), and a semi-permanent laterally mounted horizontal acoustic Doppler profiler (ADP). These moorings were deployed in the three major tidal channels that connect Lake Pontchartrain with the coastal ocean. A process similar to tidal straining was observed: the vertical shear of the horizontal velocity was negligible during the inundation stage, but a shear of 0.8 m/s over a less than 5 m water column was recorded during the receding stage, 2–3 times the normal tidal oscillations. The surge reached its peak in the Industrial Canal 1.4–2.1 h before those in the other two channels. The inward flux of water lasted for a shorter time period than that of the outward flux. The inward flux was also observed to have much smaller magnitude than the outward flux (∼960–1200 vs. 2100–3100 million m³). The imbalance was believed to have been caused by the additional water into Lake Pontchartrain through some small rivers and inundation over the land plus rainfall from the hurricanes. The flux through the Industrial Canal was 8–12%, while the flux through the other two tidal passes ranged between 17% and 70% of the total, but mostly split roughly half-half of the remaining (∼88–92% of the total).     

Transpiration and plant water relations of evergreen woody vegetation on a recently constructed artificial ecosystem under seasonally dry conditions in Western Australia

Understanding transpiration and plant physiological responses to environmental conditions is crucial for the design and management of vegetated engineered covers. Engineered covers rely on sustained transpiration to reduce the risk of deep drainage into potentially hazardous wastes, thereby minimizing contamination of water resources. This study quantified temporal trends of plant water potential (ψ_p), stomatal conductance (g_s), and transpiration in a 4‐year‐old evergreen woody vegetation growing on an artificial sandy substrate at a mine waste disposal facility. Transpiration averaged 0.7 mm day^?1 in winter, when rainfall was frequent, but declined to 0.2 mm day^?1 in the dry summer, when the plants were quite stressed. In winter, the mean ψ_p was ?0.6 MPa at predawn and ?1.5 MPa at midday, which were much higher than the corresponding summer values of ?2.0 MPa and ?4.8 MPa, respectively. The g_s was also higher in winter (72.1–95.0 mmol m^?2 s^?1) than in summer (<30 mmol m^?2 s^?1), and negatively correlated with ψ_p (p < 0.05, r² = 0.71–0.75), indicating strong stomatal control of transpiration in response to moisture stress. Total annual transpiration (147.2 mm) accounted for only 22% of the annual rainfall (673 mm), compared with 77% to 99% for woody vegetation in Western Australia. The low annual transpiration was attributed to the collective effects of a sparse and young vegetation, low moisture retention of the sandy substrate, and a superficial root system constrained by high subsoil pH. Amending the substrate with fine‐textured materials should improve water storage of the substrate and enhance canopy growth and deep rooting, while further reducing the risk of deep drainage during the early stages of vegetation establishment and in the long term. Overall, this study highlights the need to understand substrate properties, vegetation characteristics, and rainfall patterns when designing artificial ecosystems to achieve specific hydrological functions. Copyright © 2011 John Wiley & Sons, Ltd.     

A mixing-length model for predicting vertical velocity distribution in flows through emergent vegetation

Abstract

The vertical profiles of streamwise velocities are computed on flood plains vegetated with trees. The calculations were made based on a newly developed one-dimensional model, taking into account the relevant forces acting on the volumetric element surrounding the considered vegetation elements. A modified mixing length concept was used in the model. An important by-product of the model is the method for evaluating the friction velocities, and consequently bed shear stresses, in a vegetated channel. The model results were compared with the relevant experimental results obtained in a laboratory flume in which flood plains were covered by simulated vegetation.     

Induced gravity anomalies and seismic energy as a basis for prediction of mining tremors

The results of prediction of occurrence of mining tremors and bursts in the course of the exploitation of the remaining part of the hard coal in seam 510 of the mine Pstrowski, Upper Silesia, have been presented in the paper. The exploitation has taken place under extremely difficult conditions hazardous for the mining crew.To predict the occurrence of mining tremors, bursts and direction of migration of increased elastic strain in the rock mass, the microgravity method has been applied.The microgravity observations were carried out in the measurement points located at mutual distances equal 20 m in three profiles of the lengths 700 m, 760 m and 260 m respectively. The profiles were located in mining workings in the vicinity of the exploited part of the bed. In the course of exploitation, lasting 25 months, 29 series of measurements including 3600 individual microgravity observations were carried out. Microgravity observations were made with a Worden-Master gravimeter.The observed time changes of gravity microanomalies were essential for prediction. Local negative changes of gravity microanomalies signalled the approaching mining tremor. The tremor would cover an area of the radius 60 m to 100 m. The regional time changes of the gravity microanomalies appearing as linear trends of these anomalies signalled the development of the fields of elastic strain in the whole investigated area and the approaching violent release of elastic strain energy from the rock mass.The values of the amplitudes AMP of the above-mentioned trend were the measure of this hazard. In the course of the investigations each shock was preceded by considerably increased values of AMP.     

Shape analysis and multispectral classification in geological remote sensing

This paper discusses the usage of mathematical morphology in image processing of remotely-sensed data for geologic interpretation. Particular attention is given to noise-reducing transformations of spectral bands before and after different methods of classification, and to the usage of textural context. The development of a viable processing strategy requires a multidisciplinary approach and expert knowledge in different areas: (a) geology, geomorphology, and vegetation in a study area, (b) properties of the sensor for imagery photointerpretation, (c) spectral/spatial properties of the digital data within an integrated dataset (remote sensing and ancillary data), and (d) data-processing tools including mathematical morphology theory. Examples of geometric characterization of Canadian LANDSAT scenes are described in which shape measurements are obtained using a PC-based hybrid image-processing and geographic information system, termed ILWIS, which was developed at ITC, in the Netherlands. Classes from supervised and unsupervised classification are compared to guide in geological mapping. Classes over individual occurrences of broad vegetation-landform units are studied to aid in environmental mapping. Field knowledge is the context necessary to construct expert procedures to drive sequences of data-processing steps toward a target result such as optimal classification, enhancement, or feature extraction. The interaction between expert rules and the image-processing steps can be based on synthetic measurements of shape to quantize the information either spatially or spectrally. Many useful geometrical transformations of spatially-distributed data are extensions or generalizations of spatial analysis functions typical of geographic information systems.     

用数字测高仪漂移测量研究电离层声重波扰动

数字测高仪Digisonde中的漂移测量,常用来研究小尺度电离层扰动,如电离层小不均匀体的漂移。文中提出一种新的分析方法,利用漂移测量数据中多普勒频移和到达角参量的最大熵动态功率谱,估算声重波一类大尺度电离层扰动的水平传播速度和传播方向。作为实例,研究了Millstone Hill测高仪站的漂移观测资料,并对处理结果进行了初步分析。分析结果表明,从数字测高仪漂移测量数据中,可有效地提取声重波一类大尺度电离层扰动的传播参量,在电离层动力过程的研究中很有意义。     

Observations of geomagnetic pulsations and variations with a new borehole magnetometer down to depths of 3000 m

b
A triaxial magnetometer has been developed for investigating the in situ skin effect of horizontal geomagnetic pulsations and variations in deep boreholes. The observations were carried out in the pilot borehole of the Continental Deep Drilling Program of Germany (KTB) down to depths of 3000 m and up to temperature of 90 C. A weak skin effect, due to the known very low conductivity of the penetrated crystalline rocks, of 90 to 95 per cent in amplitude and -5 to -10 rotation in phase has been observed at periods of 10 s and magnetometer depth of 2400 m.
An essential prerequisite for all calculations is the accurate determination of the orientation of the downhole magnetometer. It is demonstrated how oriented record samples of temporal variations at depth correlate precisely with those from the surface.
Results from surface magnetotelluric (MT) investigations show strong local distortions of the telluric field. The distortion of the MT tensor response has been determined by means of newly introduced skin-effect transfer functions, which are assumed to be undistorted.