安徽铜陵矿集区海底喷流沉积体系的流体包裹体微量元素对比

铜陵矿集区与铜-金(多金属)矿床有关的热液活动主要有两大体系。即与海西期海底喷流沉积有关的热液体系和与矽卡岩矿化有关的燕山期岩浆热液体系。查明这两类热液体系的流体包裹体特征对区域找矿和矿床成因研究都有实际意义。在包裹体岩相学研究基础上，应用ICP-MS技术和热爆提取方法，研究了新桥、冬瓜山、峙门口、铜官山、朝山等矿床具代表性的热液石英中流体包裹体的微量元素、稀土元素特征。结果表明，两类热液体系在流体包裹体特征上有较大的区别，在流体的微量元素和稀土元素特征方面也很不相同。海底喷流沉积体系的热液石英中流体包裹体与岩浆热液体系的相比。稀土总量较高，LREE／HREE比值较大，δEu不明显。且Mo／(W Sn)比值较高，反映流体中成矿物质的深源特征；Ga／T1、Rb／Cs大。Zr／Hf低，也不同于岩浆热液体系。     

火山岩与地形联合约束下海岛土壤稀土元素地球化学空间分布异质性——以广西涠洲岛为例

海岛土壤地球化学特征的研究对于认识海岛表生地质环境有重要意义。本研究以我国最大的第四纪火山海岛——涠洲岛为案例,重点研究亚热带海岛环境下火山岩风化土壤的稀土元素（REE）地球化学特征,并探讨影响其空间分布的关键因素。结果表明,涠洲岛土壤REE总量（ΣREE）自然变化范围较大,介于59.07~575.30 mg/kg,平均值为285.53 mg/kg,高于中国大陆土壤背景值（163.86 mg/kg）,指示火山岩风化海岛具有较高的土壤REE丰度。反距离权重插值法（IDW）分析指示,岛内土壤的REE含量高低变化呈现出以带状和斑块状为主体形态的空间分布不均一性,推断其成因与母质岩石类型和地形位置等因素密切相关。3种不同岩性的成土母岩的ΣREE含量变化序列为：玄武岩（236.66 mg/kg）>火山碎屑岩（215.58 mg/kg）>含生物碎屑海滩沉积物（18.99 mg/kg）,对应的土壤ΣREE含量具有类似变化规律,即玄武岩土壤（307.20 mg/kg）>火山碎屑岩土壤（297.46 mg/kg）>含生物碎屑海滩沉积物土壤（89.73 mg/kg）。该证据指示母岩是控制岛内土壤REE含量变化的首位因素,玄武岩整体上易形成具有较高REE丰度的土壤,火山碎屑岩次之,而含生物碎屑海滩沉积物反之。此外,本研究还发现火山碎屑岩单一岩性区内,发育的土壤REE含量也会随地形地貌差异而出现显著变化,其原因是地形地貌制约了土壤矿物和化学风化程度,海蚀丘陵比海积平原更利于海岛土壤中REE次生富集作用的发生。

     

Seismic Ground Motion Expected for the Eastern District of Naples

The seismic ground motion of a test area in the eastern district of Naples is computed with a hybrid technique based on the mode summation and the finite difference methods. This technique allows us the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, we consider the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, which is located about 90 km from the epicenter.The detailed geological setting is reconstructed from a large number of drillings. The sub-soil is mainly formed by alluvial (ash, stratified sand and peat) and pyroclastic materials overlying a pyroclastic rock (yellow neapolitan tuff), representing the neapolitan bedrock. The detailed information available on mechanical properties of the sub-soil and its geometry warrants the application of the sophisticated hybrid technique.As expected, the sedimentary cover causes an increase of the signal's amplitudes and duration. If thin peat layers are present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such layers, that tend to seismically decouple the upper from the lower part of the structure.For SH-waves, the influence of the variations of the S-wave velocities on the spectral amplification is studied, by considering locally measured velocities and values determined from near-by down-hole measurements. The comparison between the computed spectral amplifications confirms the key role of an accurate determination of the seismic velocities of the different layers.The comparison performed between a realistic 2-D seismic response and a standard 1-D response, based on the vertical propagation of waves in a plane layered structure, shows considerable difference, from which it is evident that serious caution must be taken in the modelling of expected ground motion at a specific site.     

Finite element analysis of the effect of corrosion on the behavior of reinforced earth walls

A simple model for the corrosion‐induced loss of stiffness and strength of the steel strips of earth‐reinforced walls was introduced in a finite element simulation of the long‐term behavior of the wall, in which the backfill‐strips interactions are taken into account by means of a generalized homogenization procedure (called a multiphase model). The results show an initial phase of slow displacements induced by the loss of stiffness, followed after a few decades by a steep acceleration of the displacements, leading to wall failure. The influences of the parameter controlling corrosion, the backfill cohesion and the heterogeneity of the corrosion process are discussed. Results are used to discuss a strategy for reinforced earth wall surveillance. Copyright © 2011 John Wiley & Sons, Ltd.     

鄂尔多斯盆地南部延长组富铀凝灰岩地球化学特征及形成机制

本文系统地研究了鄂尔多斯盆地南部延长组凝灰岩元素和同位素地球化学特征。结果表明：凝灰岩主量元素具有高K、高Al、Si中等至高、低Na的特征; REE总体特征为轻稀土富集、重稀土亏损,∑REE在4857～40212 μg/g 之间变化,Eu呈现出负异常,在034～082内变化,δCe范围在080～208之间; 微量元素中U含量在312～144 μg/g 之间,Ba、U、Th、Hf和Ce呈明显正异常,Nb、P、Ti和Rb呈现负异常。详细的分析表明：U的富集和一些微量元素如Ta、Dy、Lu等相关,Th与∑REE存在明显的正相关性,这些变化可能和盆地中铀矿的富集有关; 凝灰岩的硫同位素总体呈现深源特征。根据以上的研究对凝灰岩的形成原因及形成环境进行了探讨。鄂尔多斯盆地南部延长组凝灰岩来源于秦岭造山带火山作用,其中的铀元素富集是由于砂岩型铀矿中铀向凝灰岩迁移而被还原所致。本研究对盆地砂岩型铀矿的铀运移和富集机理认识具有一定指导意义。     

原子探针层析技术及其在矿床研究中的应用

原子探针层析技术（APT）是一种能够以亚纳米分辨率提供定量的三维元素和同位素分析的测试分析技术,具有极高的空间分辨率和低的检出限。虽然原子探针主要用于材料科学和半导体领域,但随着近年来在矿床研究中应用的不断增加,正逐渐成为矿床研究的有用手段。与传统的地质分析技术相比,原子探针具有独特的技术优势,可以测量体积＜0.0007μm3的矿物的元素组成,能够在纳米尺度上揭示矿物成分的复杂性,为理解地质演化过程提供全新的认识。本文在简述原子探针层析技术的基本原理、样品的选择和处理以及针尖样品制备的基础上,重点从成矿元素赋存状态、纳米尺度包裹体和稳定同位素组成三个方面阐述了原子探针在矿床研究中的代表性应用成果。迄今为止,原子探针在矿床学中的应用主要集中在成矿元素赋存状态的分析上,尤其是与金矿相关的黄铁矿或其他化学组成相对简单的矿物。而在纳米尺度包裹体和稳定同位素组成方面,原子探针应用成果虽不如前者丰富,但也取得了一些重要的全新认识,表现出良好的应用前景。原子探针在矿床学领域迅速发展的同时,也存在一些亟需解决的问题,如复杂质谱峰的标定、三维重建失真等。尽管如此,相信随着技术的不断进步,原子探针将逐渐成为矿床研究的重要工具。     

A hybrid discrete–finite element model for numerical simulation of geomaterials

A hybrid discrete–finite element model is introduced for simulation of mechanical behavior of geomaterials. The soil or rock is modeled as a system of discrete balls that interact through normal and shear springs. The balls can be bonded at the contact points to withstand the applied deviatoric stresses. The important feature of this model is that the confining walls that can be imagined for example as the surrounding membrane or the mold in a physical test are modeled by deformable finite elements. This allows simulation of laboratory test features more realistically compared to the situations where the surrounding walls are rigid. The relationships between micro- and macro-properties are investigated in this paper as well. These relationships and the corresponding curves are helpful tools in calibration of the numerical model for the macroscopic elastic properties.     

基于岭估计的SPOT影像外方位元素的解算方法

后方交会法解求 SPOT卫星影像的外方位元素时 ,其法方程系数矩阵经常产生很严重的病态 ,若用最小二乘法估计 ,参数解将明显偏离真值 ,甚至无法解得外方位元素。本文中提出了用最小二乘岭估计的方法解求外方位元素 ,实验证明这是非常有效的。     

加速迭代硬阈值ISAR稀疏成像

加速迭代硬阈值(AIHT)作为一种压缩感知(CS)算法,具有计算复杂度低、内存占用小的特点,在较小数目的观测下,经过有限次迭代便能获得较好的重建效果。因此,本文将该算法应用到逆合成孔径雷达(ISAR)稀疏成像,对该方法的具体特征和适用性进行了详细分析。仿真结果表明,在相同信噪比和回波脉冲数条件下,基于AIHT的ISAR成像方法,相比于稀疏贝叶斯算法(SBL),在重建时间上缩短了至少2个量级;相比于迭代加权最小二乘法(IRLS)和平滑l0范数算法,在重建质量上提高了约3倍。经实测数据处理结果验证,在1/4原始脉冲数条件下,该方法仍具有良好的聚焦性能和压低旁瓣效果。     

顾及同步差的POS系统视准轴误差检校

推导了POS系统视准轴误差检校的数学模型,提出将POS系统的同步差作为一项检校内容,并给出了严格的同步差估算方法。试验表明,顾及同步差的视准轴误差检校精度与转换所得的角元素精度均有明显提高。