邢东矿井构造特征及应力应变场分析

邢东矿井位于太行山隆起带与华北沉陷带的过渡带,通过区域构造应力-应变场分析,本区先后经历了由挤压-拉张的变形过程,变形强度由弱到强。海西期构造应力影响较弱,印支期-中燕山期构造应力作用较为强烈,形成了大量的挤压结构面和压缩构造．燕山晚期-喜山期是构造形成的最终阶段,以拉张伸展变形为主,现今的多数正断层的断裂结构面仍保存有先期的挤压结构面特征。区内构造以断裂构造为主要形式,断层组合形式多样,这些构造形成期次不同,北西向断裂对北东向断裂具有限制作用。     

山西天池煤矿构造特征及其形成机制

基于天池煤矿地质勘探资料,结合区域构造背景研究了矿井地质构造特征及形成机制。天池煤矿构造属简单构造,地层总体呈走向北东、倾向北西的单斜构造,矿井内褶皱发育程度较低,断层以正断层为主,其次为低角度逆掩断层。陷落柱分布较为杂乱,成群出现,常见于褶皱轴部。自三叠纪末期开始一直受到区域构造活动的控制作用,印支期受SN向的挤压,形成了一些近EW向的构造;燕山期经历两期NWW--SEE向挤压使井田内地层及煤层主体呈NE走向;喜山早期的NE—SW向挤压,导致NE向断层的性质发生转变;上新世开始表现为区域上的伸展作用。     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

Die Rheingrabenrandverwerfung im Wattkopftunnel bei Ettlingen (Nordschwarzwald)

The Wattkopftunnel, near Ettlingen (Nordschwarzwald), drives through the eastern margin of the Rheingraben. The tunnel passes cenozoic and mesozoic sediments. Early quarternary and tertiary beds are situated west of the main thrust of the Rheingraben. Fossil record indicates upper Oligocene age (Chatt) for parts of the tertiary sediments. At the eastern border of the Rheingraben, wedges of jurassic and middle triassic series are squeezed. East of the Rheingraben the tunnel drives in the lower triassic Bausandstein. The eastern margin of the Rheingraben was investigated in detail during tunneling. Faults of the Rheingraben margin are distributed in an 130 meter wide fault zone in the tunnel. Total stratigraphic separation by the normal faults reaches more than 2 000 meters. The cenozoic sequence suffered synsedimentary to early diagenetic deformation, while the mesozoic series are characterized by ruptural deformation. The fault- and joint system is directed in the rheinische Richtung (SSW-NNE). East of the Rheingraben a second direction occur, running parallel to the lower Albtal (W-E).

     

地下连续墙治理地下水污染

介绍一种治理已被严重污染的地下水的方法。即修建一道底部深入到不透水岩层的地下墙,把污染物封闭在由底部不透水岩层和周围地下防渗墙组成的“地下盆”中,降低周围地下水中有害物质的浓度,然后再治理封闭圈内的污染物,以达到彻底根治地下水污染的目的。     

New paleomagnetic results from the Aegean extensional province

Various Oligocene formations from NE Greece (ignimbrites from the Medousa area, rhyolites from Zagradenia, granodiorites from Elatia) show discordant paleomagnetic signatures, in each case indicating small cw (clockwise) rotation and also inclination flattening. Marls from Pithion were partly remagnetized in a present-day field. Samples that contain ancient magnetization components also indicate small cw rotation and inclination flattening. However, the magnetization of andesites from Peplos reflects a considerably larger rotation, likely owing to local tectonics. In the context of previous work in the area, these results are used to propose a subdivision of NE Greece into four structural zones of distinctive rotational behaviour (from east to west): sites in zone 1, east of the Kavala-Xanthi-Komotini fault (KXK), show various cw and ccw (counterclockwise) rotation angles owing to complex kinematics resulting from the interaction of the KXK and the north-Anatolian fault zone. However, zone 2, between the KXK and the Strymon valley, is structurally homogeneous ( 10° cw rotation). The paleomagnetic signature of the Vertiskos massif (zone 3) implies a larger (> 30°) cw rotation, whereas sites in the Vardar basin (zone 4) contain a paleomagnetic signature similar to that of zone 2. This suggests a motion of the Vertiscos massif, a meta-ophiolitic nappe, relative to underlying strata. Indeed, zones 2 and 4 may be parts of the same structural unit which underlies this nappe.     

Possible ways to decipher spatial distribution of mineral resources

Regularity of structural patterns can be connected to planetary disjunctive systems (paleosystems). A computerized universal model of these systems should be developed that may be helpful to predict unknown localities of mineral resources controlled by tectonic processes. The specific character of tectonic phenomena is to be respected in geomathematical models. Some suggestions for applications are given.     

Comparison of structural and least-squares lines for estimating geologic relations

Two different goals in fitting straight lines to data are to estimate a true linear relation (physical law) and to predict values of the dependent variable with the smallest possible error. Regarding the first goal, a Monte Carlo study indicated that the structural-analysis (SA) method of fitting straight lines to data is superior to the ordinary least-squares (OLS) method for estimating true straight-line relations. Number of data points, slope and intercept of the true relation, and variances of the errors associated with the independent (X) and dependent (Y) variables influence the degree of agreement. For example, differences between the two line-fitting methods decrease as error in X becomes small relative to error in Y. Regarding the second goal—predicting the dependent variable—OLS is better than SA. Again, the difference diminishes as X takes on less error relative to Y. With respect to estimation of slope and intercept and prediction of Y, agreement between Monte Carlo results and large-sample theory was very good for sample sizes of 100, and fair to good for sample sizes of 20. The procedures and error measures are illustrated with two geologic examples.     

近50 a渭河流域洪水成因分析及防治对策

 通过对近50 a渭河流域洪水的年际变化、月际变化和潼关高程变化的综合分析得出，造成该流域洪水灾害的原因有降水量年内分配不均和年际变化大，滩面淤积加重，支流河口淤塞以及河势、流态的恶化等。针对这些原因，根据渭河流域洪水灾害的特点，提出了相应的防治措施，即降低下游高程，减少河道的淤积，增大河道泄洪能力；利用水库进行调水调沙，引进客水冲刷渭河下游；防洪工程要除险加固，提高防洪标准与抗洪能力；恢复林草植被，遏止水土流失，从源头上控制泥沙入河等。     

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.