风廓线雷达水平风数据质量控制

基于九龙站风廓线雷达实时水平风数据制定了水平风数据的质量控制方法，首先求取中位数水平风场，其次构建实际观测风场和中位数风场的差值序列，然后求取差值序列的均方差，再根据差值均方差得到质控判别式，最后试验求取质控判别式中的质控阈值。通过对九龙站2017年风廓线雷达水平风数据质量控制发现，实测风向数据有2044185个，25721个没有通过质控，未通过质控的风向数据占总观测的比例是1.258%，风向数据在近地层通过质控的数据最多，随高度增加通过质控的数据量有所下降。实测风速数据有2044185个，18296个没有通过质控，未通过质控的风速数据占总观测的比例是0.895%，风速数据在2000～4000 m出错的最少，近地层次之，4500～7000 m出错的数据最多。质控后风廓线雷达和探空观测风数据的均方根误差减小，相关系数增加，风向数据质量在500～7000 m提升明显，风速数据在1500～8000 m之间提升明显。     

半主动悬挂系统磁流变减振器的阻尼力实验与分析

采用磁流变减振器的履带车辆半主动悬挂系统,由于磁流变流体阻尼器结构简单、体积小、能耗低、反应迅速且阻尼力可调,正在成为新型履带车辆悬挂系统的发展方向。本文基于磁流变可控流体本构关系的Bingham模型,对影响车用磁流变减振器的阻尼力的各种因素进行了综合分析。对自行研制的双出杆剪切阀式磁流变减振器进行了实验研究,用实验与数值计算相结合的方法建立了粘滞阻尼力与液体动力粘度的关系、粘滞阻尼力与活塞间隙的关系、总阻尼力与活塞间隙的关系以及活塞间隙与可调系数K的关系。讨论了活塞间隙对磁流变减振器工作性能的影响规律,得到了活塞间隙的取值范围及依据。文中的数值计算是建立在已成型的试验器材基础上的,所以得到的关系曲线具有一定的实际意义和参考价值。     

Remote structural health monitoring with serially multiplexed fiber optic acoustic emission sensors

Development and testing of a serially multiplexed fiber optic sensor system is described. The sensor differs from conventional fiber optic acoustic systems, as it is capable of sensing AE emissions at several points along the length of a single fiber. Multiplexing provides for single channel detection of cracks and their locations in large structural systems. An algorithm was developed for signal recognition and tagging of the AE waveforms for detection of crack locations. Laboratory experiments on plain concrete beams and post-tensioned FRP tendons were performed to evaluate the crack detection capability of the sensor system. The acoustic emission sensor was able to detect initiation, growth and location of the cracks in concrete as well as in the FRP tendons. The AE system is potentially suitable for applications involving health monitoring of structures following an earthquake Supported by: National Science Foundation, Grant number CMS-9900338     

New approach to milling circuit control—robust inverse Nyquist array design

The aim of this paper is to present an application of robust inverse Nyquist array control design method to a milling circuit in Majdanpek Copper Mine. An existent model of a milling circuit was adopted to respond to robust inverse Nyquist array methodology demand by introducing model uncertainty, and optimal robust controller of milling circuit is designed. The proposed controller is robust for reference signals. The robustness of multivariable feedback systems with designed controller is tested and compared with different, previously designed multivariable controllers. Simulation results, in time domain, demonstrate the preferable performance of the designed robust controller in setpoint tracking. Implementation of the new controller without any investments in new equipment significantly improves performance of the milling process.     

区域人地系统的优化调控与可持续发展

区域人地系统的优化调控始终是现代地理学的重要任务,也是市场经济条件下中国实施可持续发展战略的理论基石。文章认为,区域人地系统优化调控的对象结构应从PRED系统改进为P_DR_DE_DE_DE_DS_D系统,人地系统优化调控的切入点与重点应坚持“以人为本”,而调控的重中之重应是人的意识建设,优化调控的目标点是追求和谐发展至上的目标。人地系统优化调控的动态机理在于模拟“人圈”与“地圈”的最佳距离,优化调控的空间结构包括核心区、发生区、支持区和作用区,各功能区相互竞争的结果形成区域定位与空间共生。协调优化和调控区域人地系统,不仅包括人地系统各要素之间以及各要素内部发展的动态协调与优化,而且包括区域之间人地系统的空间协调和优化,只有同时实现了区域之间人地系统的产业组织协调和空间组织协调,消除了区域盲目竞争与区域冲突,才能实现人地系统经济社会行为对空间区位的合理占据,才能真正实现区域之间的协调发展和空间共生。     

2000国家GPS大地控制网数据处理方法与结果

介绍了我国GPS大地控制网的基本情况,阐述了结合地壳运动观测网络工程建立全国统一的“2000国家GPS大地控制网”的意义,并介绍了整网平差中采用的技术方法和最后平差结果及精度。     

Incremental Growth of Plains-Type (Compactional) Folds in a Cratonic Environment as Revealed by the Sedimentary Sequence

The enigma of the origin and development of plains-type folds, as they were christened in the early 20th Century, essentially has been solved. The folds, a considerable distance from the tectonic disturbance, were formed by draping of sediments over differentially displaced Precambrian basement fault blocks. These Precambrian basement fault blocks controlled the location, size, and shape of the folds. Forces were transmitted through the rigid basement causing readjustment along the indigenous fracture/fault pattern formed much earlier. In the U.S. Midcontinent, the crystalline basement is overlain by a thin veneer of sediments, and once the structures were formed, they continued to develop as evidenced by features in the overlying sediments. As the stress was transmitted through the basement and then relaxed, the fault blocks moved differentially in concert to these outside forces. Sediment compaction and nondeposition over structural topographic highs reacted accordingly to form the features as seen today. To determine the structural history, structural closure on different horizons on the anticline is plotted in their appropriate stratigraphic position at depth. This gives a compaction line for each tectonically coherent segment. Similar segments show a relatively straightline with offsets at major unconformities indicating breaks in the continuum. It is at these breaks that the section can be stretched until the compaction line matches as a continuum with the resulting gap giving the approximate amount of missing section for that part of the rock column. Conversely, the amount of closure on a structure at depth for each line segment can be estimated by extrapolating downward in that segment. This technique to determine depth of burial and thus the amount of missing stratigraphic section from well data at numerous locations has been compared with estimates made by other methods and the results are similar. Where no other data are available or for quick estimates, then, it is proposed that this approach will give reasonable results and that the values can be used as a constraint in basin modeling.     

冀中坳陷古近纪的伸展构造

冀中坳陷的构造格架是新生代的伸展构造系统。该系统以大兴、保定－石家庄拆离滑脱断层为主体,与牛东－河东、马西、宁晋、新河等伸展断层以及徐水－安新变换带和衡水、宝坻－桐柏镇变换断层等组合而成。据平衡剖面和基底沉降曲线分析,冀中坳陷古近纪伸展作用过程持续发育,具幕式特点,以沙三期伸展作用最为强烈。地壳的快速伸展作用与火山活动强度之间缺乏耦合关系。冀中坳陷的动力学成因与伸展背景下的剪切作用有关。     

Matrix expression of thermal radiative characteristics for an open complex

The directionality of thermal radiance of a homogeneous isothermal non-black plane surface is totally decided by its directional emissivity, which depends on the complex dielectric constant and roughness of surface. It can be expressed by This paper proves that it is necessary to express emissivity by a matrix when a target becomes an inhomogeneous non-isothermal open complex with complicated inner geometric structure. The matrix describes the inner radiative interaction among components accurately and also expresses its thermal radiative directionality and structural characteristics completely. Advantages of matrix expression are as follows: first, the physical mechanics of effective emissivity of an open complex is described in a simple and perfect way; second, it becomes easy to understand the principle and method to retrieve components temperature from multi-angle thermal remotely sensed data; and third, the differences of directionalities between an open complex and a homogeneous isothermal non-black plane body are expressed by just using an effective emissivity matrix instead of an emissivity vector. Formula in classic physics is only the special case of matrix expression; therefore, the matrix is a universal unconditional expression to describe the directionality of thermal radiance.     

21世纪矿业应向后工业发展势态倾斜--适者生存和可持续发展

“后工业”（post-industry)是知识经济或曰“新经济”的发展时代。这个时代的自然资源和一般劳动力资源,包括矿产资源在国民经济和社会发展中的基础地位逐渐为知识产权、市场网络、信息、创新环境等后天获得性资源,以及为创新人才的新“认知”（recognized intellect,RI)所代替。然而,据矿产资源分布及其成矿既具有一定的全球统一性又有区域的特殊性,以及不同国家（地区）对矿产资源勘查程度的不均衡性,特别是矿业活动与其他产业性质的不同,如何能按不同国家（地区）的具体发展状况,做好21世纪矿业向“后工业”发展势态的倾斜,达到适者生存和矿业可持续发展的目标是当代探讨的重大问题。在概括阐述了21世纪矿业发展势态、矿业活动特点及其自然属性的基础上,提出了矿业可持续发展的地质勘查和矿业活动决策支持系统的模拟,以及对当前紧缺铜矿资源可持续发展的新“认知”。