腾冲地块西缘那邦基性麻粒岩中石榴石Sm-Nd等时线年龄及其意义

石榴石 Ｓｍ  Ｎｄ 等时线法是近年来常用于较新年龄的测年方法。腾冲地块西缘新近发现的基性麻粒岩中石榴石和全岩的 Ｓｍ  Ｎｄ 等时线年龄为 １７～２５ Ｍａ, 是该麻粒岩经受后期变形变质作用的年龄, 与区内右旋走滑断裂活动时限相一致,为确证腾冲地区的右旋走滑断裂是印支地块逸出的西部边界提供了 Ｓｍ  Ｎｄ 等时线方法的年龄约束。并推断石榴石 Ｓｍ  Ｎｄ 体系的封闭温度较低, 应低于那邦变质基性岩晚期变质作用的６４０℃～７２０℃。     

Das Verhalten des Mikroorganismus Metallogenium spec. in einer kontinuierlichen Kultur

A series of 7 growth experiments with Metallogenium sp. was conducted in a flow-through reactor (chemostat). The results demonstrate that Metallogenium sp. grows under simulated lake water conditions in the laboratory. Metallogenium reacted in the chemostat in the same way as a microorganism. The growth rates of the microorganism Metallogenium were determined. It can be concluded therefore that the maximal growth rate at a temperature of 15 °C was 0.7 d⁻¹.     

四川则木河断裂带微断层地貌的地形测量和走滑速率的估算(英文)

则木河断裂带南北分别与安宁河断裂带和小江断裂带相接,自中更新世复活以来,以左旋走滑为主,并成为一条重要的地震断层。据TL和ESR 测年分析,则木河谷地广泛存在的最低一级冲积扇为10 000 ～15 000 年以来形成。切割这些冲积扇的冲沟被则木河断裂带错断,其发生时间与冲积扇相当或者更新,平均位移值测量为86m 。据此计算,则木河断裂带晚更新世以来的平均走滑速率为5-8 ～8-6m m/a     

用不完整的地震资料估计地震矩年变化率

在充分考虑现有地震资料的不完备性和震级服从两端截去泊松分布的条件下,建立了用历史地震资料和现代地震资料及考古地震资料计算地震矩年变化率的方法。计算了西南地区几个地震带的地震矩年变化率,并与地质资料得到的结果进行了比较,结果表明该方法是切实可行的     

GPS动态测量连续周跳检验

本文针对ＧＰＳ动态测量中经常出现的连续周跳,提出了一种新的连续周跳的检验方法。该方法在理论上是最优的,与Ｋａｌｍａｎ滤波平行操作,能够实行处理周跳引起的偏差;而且,在偏差估计的同时,兼顾后续偏差检验,因而可利用尽可能多的观测历元信息来获取精度较高的偏差估值。实例计算表明,该方法在应用中是很有效的。     

机载雷达定量测雨中雨滴谱参数的优化

机载雷达可以方便地跟踪观测对象,并且可以观测某些地基雷达较难观测的区域（如海洋）,因此近年来在大气遥感领域得到越来越广泛的应用。为了获得一个较好的地面分辨率,机载雷达使用X波段的衰减频率。虽然雷达波受到的衰减通过算法可以进行订正,但由于雨滴谱的范围较宽,使得利用Z-R或k-R经验公式来确定雨强仍具有较大的不确定性。该文应用在西太平洋进行的国际大型科学考察实验TOGA/COARE中1993年1月和2月间取得的机载雷达实测数据进行定量测雨中雨滴谱参数优化的尝试。     

Tectonic Evolution of the Lufilian Arc (Central Africa Copper Belt) During Neoproterozoic Pan African Orogenesis

The Lufilian arc of Central Africa (also called Katangan belt or Copperbelt) is a zone of low to highgrade metasedimentary (and subsidiary igneous) rocks of Neoproterozoic age hosting highgrade CuCoU and PbZn mineralizations. The Lufilian arc is located between the Congo and Kalahari cratons and defines a structure which is convex to the north. Three major phases of deformation characterize the construction of the Lufilian arc. The first phase (D1) called the “Kolwezian phase” developed folds and thrust sheets with a northward transport direction. D1 deformation occurred in the Lufilian arc between ca. 800 and 710 Ma, with a peak in the range 790–750 Ma. It is here correlated with the main deformation in the Zambezi belt. Southward-verging folds with the same trends as the D₁ structures were previously linked to a second tectonic event named Kundelunguian phase of the Lufilian orogeny. We show in this paper that they are backfolds developed during D1 along Katangan ramps and especially along the Kibaran foreland. The second phase (D2) of the Lufilian orogeny is the “Monwezi phase” including several large leftlateral strikeslip faults which have been activated successively. During this deformation phase, the eastern block of the belt rotated clockwise, giving the present day NWSE trend of D1 structures in this part of the Lufilian arc, and generating its convex geometry. The Mwembeshi dislocation, the major transcurrent shear zone separating the Zambezi and Lufilian arc, was mostly active during the D2 deformation phase. D2 deformation occurred between ca. 690 and 540 Ma. Such a long time interval is attributed to the migration of strikeslip faults developed sequentially from south to north, and probably to a slow convergence velocity during the collision between the Congo and Kalahari cratons. The third phase (D3) of the Lufilian orogeny is a late event called the “Chilatembo phase”, marked by structures transverse to the trends of the Lufilian arc. This deformation and the post-D_2′ uppermost Kundelungu sequence (Ks3 Plateaux Group), are younger than 540 Ma and probably early Paleozoic.     

金属矿物的反应动力学与地球化学意义

概述了动力学实验的技术方法和金属矿物的反应动力学研究进展。动力学实验使用的三种基本化学反应装置是间歇反应器（ＢＲ）、活塞流反应器（ＰＦＲ）和混合流反应器（ＭＦＲ）,确定速率定律的数学方法包括积分法、微分法和混合法,以微分法中的初始速率法应用最广。目前主要研究了水溶液中黄铁矿氧化、黄铁矿和黄铜矿形成、晶质铀矿和磁铁矿溶解的速率定律和反应机理,发现：（１）酸性溶液中黄铁矿的氧化速率对Ｆｅ３＋和Ｏ２浓度呈分数依赖并受表面反应的控制;（２）低于３００℃时黄铁矿不能从溶液中直接成核,而需初始地通过ＦｅＳ先驱物的硫化生成,ＦｅＳ与Ｈ２Ｓ反应形成黄铁矿的速率方程为二级;（３）磁黄铁矿或黄铁矿与Ｃｕ２＋反应均可形成黄铜矿,前者经历了一系列准稳的Ｃｕ Ｆｅ硫化物的中间物,后者的速率方程为表观一级并受表面反应的控制;（４）酸性ｐＨ时磁铁矿的非线性溶解行为可采用表面反应扩散输运耦合的收缩核模型（ＳＣＭ）来描述。有关动力学实验成果完善和深化了对矿床中黄铁矿、黄铜矿的形成机理和风化壳中磁铁矿的稳定性等方面的认识。将来的实验研究将向更多的金属矿物和高温高压领域发展。     

应用水化多层次跟踪预报方法研究闽台地区地震的映震特征

本文针对1990年至1999年福建及沿海中强以上地震和台湾7.0级以上地震,利用“八五”攻关的水化多层次跟踪预报方法,研究福建水氡台网观测资料的异常频次变化特征和演化过程,总结其相应的映震特征。     

应用古文化层埋深确定汾渭盆地沉积速率的研究

根据４９处仰绍至东周古化遗址深数据 距今７０００－２５００年汾渭盆地内部的沉积人部的凸起地区沉一般小于凹陷地区,如渭河凹平均沉积速率为０．４６ｍｍ／ａ临当凹陷的平均沉积速率为０．３６ｍｍ／ａ,而潼凸起和襄汾凸起的沉积速率为０．２０ｍｍ／ａ左右,分析各时代的沉积速率还发现,在仰绍之前渭河盆地内凹陷的沉积速率明显小于 仰绍之后,宝鸡凸起还由东周之前的相对下降变为相对上升,沉速度相对较大的地质单元往往