基于振动台试验的移动通信节点机房蓄电池组地震易损性分析

关键移动通信设备的地震易损性是城市移动通信系统地震灾害预测的基础。本文以移动通信系统节点机房中常用的蓄电池组作为研究对象,通过振动台试验来研究蓄电池组的抗震性能,并获得其地震易损性。试验过程中,首先采用FEMA P695建议的方法从美国PEER强震数据库中遴选出对蓄电池组较为危险的地震动记录作为试验激励,随后逐步增大各条地震动记录的幅值,基于振动台进行增量动力分析。试验后根据蓄电池组的地震损伤特征,定义了其损伤指标和损伤水平,并基于振动台试验数据分析获得了典型蓄电池组的地震易损性曲线。     

基于时间序列的InSAR相干性量级估计

本文提出了一种适用于InSAR数据处理的自适应相干性量级估计方法,该方法能够满足复信号随机平稳的假设前提,并兼顾运算效率与估计精度.此方法生成的相干图具有很好的分布特征,避免了影像空间分辨率的损失.提出的算法分为两个步骤:(1)根据地物后向散射特性,对时间序列SAR影像进行聚类分析,选择具有同分布的样本,保证SAR影像质地平稳条件;(2)对干涉图进行条纹频率估计,采用极大似然(ML)条纹频率估计方法去除系统相位引起的复信号非平稳性,并根据Cramer-Rao边界条件改善条纹频率的估计精度.以美国南加州洛杉矶地区的ENVISAT ASAR数据集为例,本文将新方法与现有方法进行了量化分析.结果表明,较传统方法而言,基于时间序列的相干性估计方法能够得到更可靠、精度更高、空间特征更鲜明的干涉相干图.     

钢管混凝土框架-混凝土核心筒减震结构振动台试验研究

某超高层钢管混凝土框架-混凝土核心筒结构因指标超限在设计中采用了耗能减震技术,为了检验该减震结构的抗震性能,制作了1/35的缩尺模型,通过在钢管混凝土框架设置阻尼器或不设置阻尼器,进行模拟地震振动台对比试验,研究了模型结构的动力特性和不同烈度地震作用下的加速度、位移和应变响应。研究结果表明:地震作用下,该钢管混凝土框架-混凝土核心筒减震结构与钢管混凝土框架-混凝土核心筒结构相比,位移、加速度和应变响应均有一定程度的降低;罕遇地震作用下,通过设置耗能减震构件,层间位移角最大值从超过规范要求的1/84减低至满足规范要求的1/130,表明该减震结构具有更优良的抗震性能。     

Shaking table test and analysis method on ultimate behavior of slender base‐isolated structure supported by laminated rubber bearings

This paper describes the results of shaking table tests to ascertain the ultimate behavior of slender base‐isolated buildings and proposes a time history response analysis method, which can predict the ultimate behavior of base‐isolated buildings caused by buckling fracture in laminated rubber bearings. In the tests, a base‐isolated structure model weighing 192 kN supported by four lead rubber bearings is used. The experimental parameters are the aspect ratio of height‐to‐distance between the bearings and the shape of and the axial stress on the bearings. The test results indicate that the motion types of the superstructure at large input levels can be classified into three types: the sinking type; the uplift type; and the mixed type. These behaviors depend on the relationship between the static ultimate lateral uplifting force on the superstructure and the lateral restoring characteristics of the base‐isolated story. In the analysis method, bearing characteristics are represented by a macroscopic mechanical model that is expanded by adding an axial spring to an existing model. Nonlinear spring characteristics are used for its rotational, shear, and axial spring. The central difference method is applied to solve the equation of motion. To verify the validity of the method, simulation analysis of the shaking table tests are carried out. The results of the analysis agree well with the test results. The proposed model can express the buckling behavior of bearings in the large deformation range. Copyright © 2010 John Wiley & Sons, Ltd.     

Theory and experimental study for sliding isolators with variable curvature

Because a conventional isolation system with constant isolation frequency is usually a long‐period dynamic system, its seismic response is likely to be amplified in earthquakes with strong long‐period wave components, such as near‐fault ground motions. Seismic isolators with variable mechanical properties may provide a promising solution to alleviate this problem. To this end, in this work sliding isolators with variable curvature (SIVC) were studied experimentally. An SIVC isolator is similar to a friction pendulum system (FPS) isolator, except that its sliding surface has variable curvature rather being spherical. As a result, the SIVC's isolation stiffness that is proportional to the curvature becomes a function of the isolator displacement. By appropriately designing the geometry of the sliding surface, the SIVC is able to possess favorable hysteretic behavior. In order to prove the applicability of the SIVC concept, several prototype SIVC isolators, whose sliding surfaces are defined by a sixth‐order polynomial function, were fabricated and tested in this study. A cyclic element test on the prototype SIVC isolators and a shaking table test on an SIVC isolated steel frame were all conducted. The results of both tests have verified that the prototype SIVC isolators do indeed have the hysteretic property of variable stiffness as prescribed by the derived formulas in this study. Moreover, it is also demonstrated that the proposed SIVC is able to effectively reduce the isolator drift in a near‐fault earthquake with strong long‐period components, as compared with that of an FPS system with the same friction coefficient. Copyright © 2011 John Wiley & Sons, Ltd.     

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.     

地震构造活动的模拟试验

本在活动构造考察及研究的基础上，采用先进的精密仪器仪表，在模拟试验中自控制监测构造活动情况，深入研究地震前后的断裂运行特征及其与地震的关系，这对圈定地震危险区和判定可能发生强震的破裂段，为国民经济建设提供可靠的依据，对逐步实现地震预报，最大限度地减轻地震灾害，均具有重要实际的意义     

Experimental and numerical studies of rock salt strain hardening

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.     

电感耦合等离子体发射光谱法测定铅锌矿中15个主次量元素

铅锌矿多元素同时测定中,样品预处理过程受多种不同因素的影响,单因素试验往往无法同时为多因素实验提供合理的优化方案。本文采用盐酸-硝酸溶矿,考察了样品预处理过程中混合酸配比、混合酸体积、消解时间及消解温度对消解效果的影响,利用正交试验设计及极差分析确定了最优消解条件:盐酸-硝酸混合酸配比3∶1,混合酸体积10 m L,消解时间120 min,消解温度90℃,用电感耦合等离子体发射光谱法同时测定铅锌矿中15个主次量元素(铅锌铜锰砷银铋镉钴镍镓铟钼锗锑)的含量。在最优条件下,用富铅锌矿石国家标准物质(GBW 07165)进行试验,大多数元素的精密度(RSD,n=12)和准确度小于5%,方法检出限为0.0019~0.048μg/g。基于铅锌矿主要是以硫化物形式存在,采用一系列硫化物国家标准物质验证方法的准确度及可行性,检测结果基本都在标准值的误差范围内。应用该方法分析湖南某矿区中大批量铅锌矿样品,标样质量统计合格率为100%,密码质量统计合格率大于97%。