Evaluation of DC, FDEM and IP resistivity methods for imaging perched saltwater and a shallow channel within coastal tidal flat sediments

Presently, electrical resistivity methods are applied in a wide variety of geological and environmental site investigations. Geologically, the coastal tidal flat sediments formed shallow channel-like features at the northern part of Germany. Three geoelectrical methods are applied to image the near surface sediments including a shallow conductive zone within the tidal deposits at the North Sea coast. These methods, direct current (DC) resistivity, frequency domain electromagnetic (FDEM) and spectral induced polarization (SIP), are evaluated to show which one can provide the required spatial resolution under study area conditions. This evaluation also includes a synthetic modeling to assess the DC resistivity imaging technique.The results constitute an encouraging example using these geophysical methods in characterizing the coastal aquifers. The inversion results show that the subsurface resistivity distribution of tidal sediments can change rapidly within a short distance. A thin high conductive layer is observed above the peat and clay layers reflecting a perched saltwater. The 2D IP section shows that the perched saltwater is restricted to patched forms above an impermeable layer of clay. According to the IP images the boundaries of the clay layer are recognized with a good resolution due to the high membrane polarization of the clays. The EM and DC profiles show a shallow channel-like feature within tidal deposits. In this paper, the best FDEM field parameters and the role of EM in lithologic studies are emphasized. Two main limitations can be observed from DC synthetic modeling: (a) A smearing in the lower boundary of the perched saltwater; (b) an amplification of the lateral effect of the highly conductive layer. These limitations decrease the resolution of DC imaging for accurate defining our targets. Because the IP response depends on microgeometry, fluid chemistry and saturation, the 2D IP results demonstrate the suitability of this method to characterize the tidal deposits in the coastal area with a good resolution. In this study, the success of SIP method supports further investigations into studying the hydraulic parameters of tidal deposits in this area. The obtained results during this investigation provide an overview of the coastal aquifer and they can serve as a basis for refining the conceptual model of morphological elements and sedimentary sequences of the coastal tidal flat.     

集安市团结区地质特征及物探异常分析

通过对集安市团结区地质特征的介绍,结合本区开展的物探激电中梯测量所取得的成果,确定该区的找矿方向。实践证明地质、物探方法相结合对于地质找矿具有重要意义。     

河北兴隆中元古界大红峪组微生物成因构造特征及其地质意义

河北兴隆一带的中元古界长城系大红峪组(1 650～1 600 Ma)以潮下坪灰白色厚层块状细粒石英砂岩为主,在砂岩层面上产出丰富的微生物成因构造(MISS).详细描述了MISS的沉积特征,并对其成因进行了初步分析.这些微生物成因构造可能反映了华北中元古代浅海潮坪环境被大面积分布的微生物席所覆盖,微生物席对砂质沉积物表面起到有效的保护作用,在一定程度上降低了沉积物的侵蚀和改造作用,从而影响基本沉积作用过程.大红峪组砂岩层面上发育的MISS为探索元古宙浅海环境微生物-沉积作用关系提供了研究材料,对这些MISS的深入研究可以加深对元古宙碎屑沉积体系的理解,从而促进微生物席沉积学的发展.     

Magnetic fields of accretion disks and outflows in prograde and retrograde black holes

We show that for the accretion disk with equipartition between magnetic and radiative pressures, prograde black holes generate outflowing energy in jets more efficiently than retrograde black holes do. Both viscous radiative and irradiative disks provide more efficient outflow jets in the case of a prograde black hole than in the case of a retrograde black hole. Our results confirm the conclusion of Tchekhovskoy & McKinney (2012) that, for the same absolute value of the spin, prograde black holes with geometrically thick accretion disks generate outflows several times more efficiently than retrograde black holes do. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

考虑诱导速度的螺旋桨敞水性能CFD模拟

螺旋桨工作时在其周围形成诱导速度场,诱导速度随到桨叶距离的增大而衰减。采用CFD方法模拟螺旋桨敞水性能时,只能截取有限尺度的流域进行计算,此时计算域边界上诱导速度并不为零,将进口速度设为进速是近似的。一般采用足够大的计算域,使螺旋桨前方及侧面边界尽量远离桨叶。为了在较小的计算域中实现螺旋桨敞水性能的准确预报,提出在设定进口速度时计入螺旋桨诱导速度的CFD模拟方法。应用升力面方法计算诱导速度,将进口速度设为进速与诱导速度之和。逐步减小计算域尺度,考察敞水性能及压力分布计算结果的变化情况及精度。算例比较表明:通过考虑诱导速度,可以大幅度减小进口与螺旋桨的距离而不降低计算精度。     

微生物矿化作用改善不同孔隙砂岩抗冻融特性试验研究

砂岩是地质遗迹和石质文物最为常见的岩石类型,冻融循环导致的风化劣化是引起其发生地质灾害的主要原因。降渗加固是解决该问题的根本途径。文章引入国际上新型的岩土体加固技术—微生物诱导碳酸钙沉淀（MICP）,以中粒砂岩和微粒砂岩为例,通过开展MICP处理和冻融循环试验,研究其改善不同孔隙砂岩抗冻融特性的可行性,分析其改善机理。研究结果表明：（1）MICP作用能显著提高两类砂岩的抗冻融特性,主要改善机理是MICP过程生成的碳酸钙不仅填充了岩石孔隙,减小了孔隙水的体积和冻融损伤作用力,同时也加强了岩石颗粒之间的胶结强度,但孔隙因素对该过程有一定影响;（2）3轮次MICP处理后的岩样在冻融循环40次后未见明显表观破坏,而未经处理的岩样当冻融循环达到40轮次时在棱角处出现局部表观破坏且中粒砂岩破坏程度略大于微粒砂岩;（3）40轮次冻融循环作用后,中粒砂岩和微粒砂岩岩样孔隙率增加率从17.0%和14.8%降低到了4.4%和6.3%,质量损失率从0.22%和0.14%下降到了0.04%和0.02%,吸水率从6.8%和4.4%减小到了0.75%和1.5%,波速降低率从18.5%和12.4%降低到了7.3%和3.8%;（4）由于中粒砂岩孔隙大于微粒砂岩,其碳酸钙沉淀效率更高,有效处理深度更深,表层孔隙间距更大,从而在进行相同轮次MICP处理时,其孔隙率降低率、吸水率降低率、质量增长率、波速增长率均较大。     

改进的多视PolSAR非局部均值滤波算法

像素点间相似性度量是非局部均值滤波算法的关键所在。从信息论角度出发,提出了一种改进的多视Pol SAR非局部均值滤波方法。该算法在综合分析各类矩阵测度基础上,选定Kullback-Leibler距离作为最优相似度量,结合多视极化相干矩阵服从复Wishart分布,给出了极化相干矩阵的KL距离,并在预处理中应用了极化旋转。实验结果表明,改进方法能够在保持边缘细节的同时有效抑制相干斑。     

偏振遥感的中性点大气纠正方法研究

地表物体具有较强的偏振特性, 因此可以作为偏振遥感的信息源。但是, 大气的偏振效应强于地表的偏振效应, 导致星载遥感器无法有效接收地表目标的偏振信息, 大气的起振与退偏效应成为偏振遥感对地表目标进行观测和应用的一个瓶颈问题。本文提出一种利用大气中性点对偏振遥感中地表偏振效应与大气偏振效应进行分离的方法, 通过天空中大气线偏振度为零的中性点区域进行对地观测, 目的是去除大气偏振作用, 进而最大限度地获取地表目标偏振信息。地面实验的结果验证了利用大气中性点进行大气纠正具有理论上的可行性。     

结合凝聚层次聚类的极化SAR海冰分割

针对全极化高分辨率合成孔径雷达(SAR)多噪声的特点,选择合适的海冰SAR影像纹理特征量,并基于凝聚层次聚类的思想,提出一种全极化SAR海冰分割方法。将该方法的结果与K-Means、迭代自组织聚类(ISODATA)和模糊C均值算法等经典分割方法相比较,发现该方法的碎斑明显减少,且分割结果较为准确,证明了该方法的有效性。     

光学与微波植被指数协同反演农作物叶面积指数的可行性分析

光学遥感是目前反演植被叶面积指数LAI（Leaf Area Index）的主要手段,但是当叶面积指数较大时存在光学遥感信息饱和、反演精度显著降低的问题。叶面积指数和平均叶倾角对光学、微波波段范围内反射和散射特性都有重要影响,主要表现在植被结构参数的变化可以引起冠层孔隙率和消光截面大小的改变。本文以典型农作物玉米为例,通过构建统一的PROSAIL和MIMICS模型输入参数,生成一套玉米全生长期光学二向反射率和全极化微波后向散射系数模拟库和冠层参数库。通过对模拟数据与LAI敏感性和相关性分析得出：（1）光学植被指数MNDVI_{(800 nm,2000 nm)},在LAI为0—3时敏感,基于MNDVI与LAI的回归模型可以估算LAI变化 0.4的情况,RMSE是0.33,R²是0.958。（2）微波植被指数SAR_{SRVI(1.4 GHz HH,9.6 GHz HV)},在LAI为3—6时敏感,基于SAR_SRVI与LAI的回归模型可以估算LAI变化1的情况,RMSE为0.22,R²是0.9839。研究表明,采用分段敏感的植被指数,协同光学和微波遥感反演玉米全生长期叶面积指数是可行的。