Long-range underwater photography in the deep ocean

Although the optical properties of seawater at extreme depths are more suitable for underwater photography than those at the surface or on continental shelves, they still impose severe limitations on long-range wide area bottom photography. Additionally, deep ocean operations impose technical limitations on control, power and bandwidth. This chapter reviews the approaches contemplated or made towards improving the camerato-target range in underwater photography in the deep ocean. Further significant improvements await advances in control, power/light sources and bandwidth reduction. With the developments now contemplated, TV and video systems will eventually present a strong challenge to emulsion film techniques.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

造山带异源浆混花岗岩理论与方法研究

1：5万花岗岩填图方法在区调工作中推广以来,在造山带花岗岩调查实践中,由于造山作用及过程的复杂性,花岗岩浆的多源及多样性,使同源岩浆演化理论及方法遇到了难题。文章在新一轮1：25万造山带试点图幅,在对同源岩浆演化理论及方法的适用性进行探索的同时,提出了异源浆混理论指导造山带内部浆混花岗岩（H型花岗岩）的填图方法。并就异源浆混花岗岩鉴别标志等作了系统总结,提出了浆混组合、浆混单元、浆混体,填图的理论方法体系;给予了浆混花岗岩明确的定义。     

粤东成矿地质背景及银-铜-铅-锌成矿物质来源探讨

通过对粤东地区地层和岩石中成矿元素含量和区域地质背景的分析,认为粤东地区铜铅-锌-银成矿作用与燕山期的构造-岩浆作用关系密切,成矿物质中银-铜-锌以下地壳来源为主,铅则以上地壳及沉积地层来源为主。     

控制内蒙古二连盆地达尔其油田石油富集度的关键因素——不同油源原油的混合作用

在对3套烃源岩的质量和成熟度描述基础上,通过对原油物理性质、族组成和生物标志化合物参数的研究,在达尔其油田内划分出成熟度有明显差异的低熟油和成熟油。油源对比结果认为它们分别由都红木组一段低熟烃源岩和阿尔善组二段成熟烃源岩所生。推测成熟度参数介于低熟和成熟之间的原油为混源油。通过原油混合试验和油砂连续抽提试验证实了混源油的推测。通过油藏剖面中不同性质油层的分布特征研究,结合断层发育史与油气运移关系分析认为不同油源原油的混合是控制该油田石油富集度较高的关键因素。此外,还分析了控制混源的断层组合特征。     

基于GIS的区域地质编图方法

本文以地理信息系统在小比例尺区域地质编图中的应用为基础,结合《亚洲中部及邻区系列地质图》的编制,详细阐述了应用ArcInfo、MapGis等GIS软件进行数字地质编图的方法.对地理空间数据和专业地质空间数据的编制做了详细介绍,其中包括各种要素制图综合、属性库制作、编码设计、现势资料的补充等.根据数据源的不同,制定了不同的技术路线和工作方法.将来自不同国家的数据源进行数据转换、投影变换和误差校正,转换为统一的数据格式和投影坐标系统.对基于GIS的区域地质编图方法及数据源做了具体分析.     

Mid‐Holocene sub‐blanket‐peat alluvia and sediment sources in the upper Liffey valley,Co. Wicklow,Ireland

A recently exposed section across a ?rst‐order valley buried beneath the regional blanket peat on hillside slopes in the upper Liffey valley, Co. Wicklow, is described. The section shows two alluvia within a shallow valley form underlain by an extensive boulder and stone line over regional till and weathered granite. ¹⁴C dates from wood in the alluvia indicate the older alluvium to have formed between 4324 ± 53 BP and 4126 ± 45 BP and the younger between 3217 ± 53 BP and 2975 ± 53 BP . The basal layer of the overlying peat yielded a date of 2208 ± 61 BP . The younger alluvium shows the effects of soil paludi?cation prior to the peat expansion. Dated pollen analyses elsewhere in the upper catchment con?rm the spread of blanket peat over most areas above 350 m after 4000–3600 BP . The buried valley was contributing sediments to the mid‐Holocene ?oodplains in the upper Liffey valley prior to the extension of blanket peat over the catchment after which sediment yields from it and the other catchment slopes declined. Copyright © 2003 John Wiley & Sons, Ltd.     

腾格里沙漠东南缘降尘粒度特征和沉积速率

从多年降尘实测资料入手，分析了粉尘粒度特征、沉积速率和时变过程。提出了气象要素相关估测模型．确定０．２５ｍｍ为本区粉尘沉积粒径上限。周围沙漠是粉尘沉积细砂部分的尘源，粉砂和粘土部分沉积来自一个较大的时空范围，二者几乎各占降尘量的１／２。研究区年平均粉尘沉积速率４３５８ｋｇ／ｈｍ２，每年５月的季风转期具有年内最大沉积速率。     

Doubtful Events Reported in Current Italian Earthquake Catalogues: The Medieval Earthquakes of Subiaco (Central Italy)

Within the framework of a study of the seismicity of the Aniene Valley (Central Italy), we analysed the medieval earthquakes of Subiaco (1216, 1227, 1299), the largest events reported for the area. Our main goal was to investigate some doubtful events reported in earthquake catalogues and, as such, currently utilised for seismic hazard estimates. A careful screening of the oldest available sources and their filiation pattern up to the present pointed out the uncertainty on the date and nature of these phenomena. A multidisciplinary approach based on the joint analysis of archaeological, geomorphologic and historical evidence allowed us to propose new interpretations concerning these events and their significance for the assessment of seismic hazard in the Aniene Valley. The main conclusion is that the dates of the 1216 and 1227 events are fairly unsupported. In particular, the 1216 earthquake could be dated back to between AD 1159 and 1181.