高职GIS专业实践教学及实践基地建设

高职教育是GIS人才培养的重要组成部分。本文通过介绍职教GIS专业的建设，探索GIS实践教学与实践基地建设模式、方法及对人才培养的影响。     

Digital model of corrected accumulated flow for peak discharge data acquisition and drainage system design

The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.

The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.

The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak.     

Measuring the k–S–p relations on DNAPLs migration

Migration characteristics of dense non-aqueous phase liquids (DNAPLs) in the subsurface can be expressed as a water–DNAPL two-phase system based on mainly the k–S–p relations, which describe the relations among relative permeability (k), degree of water saturation (S), and capillary pressure head (p). The aims of this research are to develop an experimental system with new type of probes, such as the electrical conductivity probe for measuring the degree of water saturation and the hydrophilic and hydrophobic tensiometer for measuring the pore water and DNAPL pressures, and also to estimate the results obtained from the developed experimental system. From these tests, the excellent k–S–p relations were obtained and the efficiency and validity of this developed experimental system have been confirmed in terms of the concept of the scaling coefficient calculated by interfacial tensions.     

Compression mechanisms of coesite

 The structure of coesite has been determined at ten pressures up to a maximum of 8.68 GPa by single-crystal X-ray diffraction. The dominant mechanism of compression is the reduction of four of the five independent Si–O–Si angles within the structure. There is no evidence of the fifth linkage, Si1–O1–Si1, deviating from 180°. Some Si–O bond distances also decrease by up to 1.6% over the pressure range studied. The pattern of Si–O–Si angle reduction amounts to a rotation of the Si2 tetrahedron around the [001] direction. This rotation induces significant internal deformation of the Si1 tetrahedron. Comparison of the experimental data with rigid-unit distance least-squares simulations of coesite suggests that this pattern of compression, the anomalous positive values of both s₂₃ and K′′ in the equation of state of coesite, its high elastic anisotropy and the unusual straight Si1–O1–Si1 linkage within the structure are all consequences of the connectivity of the tetrahedral framework. Received: 11 July 2002 / Accepted: 14 January 2003 Acknowledgements The help of Christian Baerlocher of ETH Zurich in providing both the DLS-76 software and advice in its use is gratefully acknowledged, as are discussions with Paul Ribbe of Virginia Tech and the comments of two anonymous reviewers. The data analysis was supported by the National Science Foundation under grant EAR-0105864 to N.L. Ross and R.J. Angel.     

Atomistic simulation of the structure and elastic properties of pyrite (FeS2) as a function of pressure

Interatomic potential parameters have been derived at simulated temperatures of 0 K and 300 K to model pyrite FeS₂. The predicted pyrite structures are within 1% of those determined experimentally, while the calculated bulk modulus is within 7%. The model is also able to simulate the properties of marcasite, even though no data for this phase were included in the fitting procedure. There is almost no difference in results obtained for pyrite using the two potential sets; however, when used to model FeS₂ marcasite, the potential fitted at 0 K performs better. The potentials have also been used to study the high-pressure behaviour of pyrite up to 44 GPa. The calculated equation of state gives good agreement with experiment and shows that the Fe–S bonds shorten more rapidly that the S–S dimer bonds. The behaviour of marcasite at high pressure is found to be similar to that of pyrite.     

中国夏季降水异常空间模与副热带高压的关系

本文用1959～1994年6、7、8月全国范围47个5°×5°经纬度网格降水资料分析了夏季降水异常空间模的月际差异，并在此基础上用西太平洋副高指数及青藏高原指数#FKB#FS分析降水异常空间模与环流的关系，为检验环流指数与降水相关场的整体信度，还对8月份降水资料进行了Monte-Carlo检验。结果表明，夏季总降水异常的空间模在每一月份中并非表现得同样清楚，江淮流域与河套及华南的反相关在8月份表现得最清楚。而青藏高原中东部南北两侧的负相关在6月及8月很清楚，7月份次之。8月份西太平洋副高北界异常对江淮流域与河套及华南地区降水异常反相关的产生有很大作用。副高稳定偏北时，河套、华南易涝，江淮易旱。反之亦然。青藏高原指数#FKB#FS与逐月降水的相关分析表明，青藏高原上高压及低涡活动对高原中东部南北两侧负相关的产生有一定作用。当高压活动偏多时，北侧易旱、南侧易涝。并且6月及8月的作用较大，7月较小。另外，8月份副高活动对这一降水异常空间模的产生也有一定影响。     

西藏聂拉木高喜马拉雅结晶岩系的伸展变形

西藏聂拉木高喜马拉雅结晶岩系在区域上以单一的叶理和单一的拉伸线理占主要地位，其变形带的组构主要反映了透入性的伸展变形；根据显微构造分析表明早期由北往南推覆，晚期由南向北伸展，且晚期表现非常明显。     

高粘性牛顿流体粘性耗散的快速计算方法

螺旋泵可用来输送高粘性液体，该过程中由于液体的温度升高而粘度降低，因而其粘性耗散不能忽略。本文介绍一种上述情况下计算液体粘度、泵的功率和压力降的近似公式。     

太古宙克拉通型下地壳剖面：华北怀安－丰镇－尚义的麻粒岩－角闪岩系

华北克拉通北缘晋冀内蒙交界地区有变质程度连续变化、从高压基性麻粒岩、麻粒岩到角闪岩相的变质岩系出露。它们的古变质压力由＞１．４ＧＰａ（５０ｋｍ）变化到０．５ＧＰａ（１５ｋｍ）；岩石类型从变辉长岩、中酸性正片麻岩到表壳岩变化；变质矿物组合由不含水的耐火组合变为富含云母和角闪石的组合；地球化学性质表现出从贫Ｓｉ和Ａｌ、轻度亏损生热元素到具有正常的化学成分的连续变化；包裹体流体性质在轻度亏损生热元素的麻粒岩中均为ＣＯ２流体，而在麻粒岩相的表壳岩和角闪岩系中Ｈ２Ｏ流体逐渐增加。上述变质岩系剖面的组成和特点符合大陆下地壳的定义，可能代表了包括最下部地壳在内的华北地块太古宙克拉通型大陆下地壳。据此本文建立了我国第一条克拉通型大陆下地壳剖面，并讨论其地质意义以及相关的问题     

华北中北部高级变质岩区的构造区划及其晚太古代构造演化

通过区域构造编图及重点地段的详细研究，在华北克拉通中北部识别出一条ＮＮＥ向的构造带——龙泉关－桑干带，它以大规模的韧性剪切带网络、重熔钾质花岗岩带、数量众多的高压麻粒岩构造透镜体或岩片为特征。剪切带以低角度逆冲为主，矿物拉伸线理指示运动方向为ＮＷ－ＳＥ向。这些剪切带造成东西两侧基底杂岩与表壳岩系包括孔兹岩系的广泛构造叠置，以及高压麻粒岩的近等温减压上隆。从更大的范围看，龙泉关－桑干带处于鄂尔多斯克拉通和阜平－赞皇克拉通之间，并且被五台－吕梁裂谷型绿岩带截切或不整合覆盖。该带应形成于晚太古代，记录了上述两个克拉通斜向拼合的构造过程