Adaptive Multiscale Permeability Estimation

With multiscale permeability estimation one does not select parameterization prior to the estimation. Instead, one performs a hierarchical search for the right parameterization while solving a sequence of estimation problems with an increasing parameterization dimension. In some previous works on the subject, the same refinement is applied all over the porous medium. This may lead to over-parameterization, and subsequently, to unrealistic permeability estimates and excessive computational work. With adaptive multiscale permeability estimation, the new parameterization at an arbitrary stage in the estimation sequence is such that new degrees of freedom are not necessarily introduced all over the porous medium. The aim is to introduce new degrees of freedom only where it is warranted by the data. In this paper, we introduce a novel adaptive multiscale estimation. The approach is used to estimate absolute permeability from two-phase pressure data in several numerical examples.     

地震波研究://car

回顾了近4年来中国地球物理学家在地震波研究方面取得的主要进展. 分别简要地讨论了层状均匀介质、横向不均匀介质和多孔介质中的地震波传播，地震面波及波形反演，以及地震勘探、测井问题中的地震波研究方面取得的新成果. 指出当前地震波研究的重要课题是发展高效的数值方法，并利用该方法开展复杂介质中的地震波激发和传播，以及强地面运动的研究，为精细的地震危险分析与预测奠定基础.      

Reflection and transmission of seismic waves at an interface betwen two saturated soils

ＲｅｆｌｅｃｔｉｏｎａｎｄｔｒａｎｓｍｉｓｉｏｎｏｆｓｅｉｓｍｉｃｗａｖｅｓａｔａｎｉｎｔｅｒｆａｃｅｂｅｔｗｅｎｔｗｏｓａｔｕｒａｔｅｄｓｏｉｌｓＪＵＮＹＡＮＧ（杨峻）ＳＨＩＭＩＮＧＷＵ（吴世明）ＺｈｅｊｉａｎｇＵｎｉｖｅｒｓｉｔｙ，Ｈａｎｇｚ...     

Confined aquifer as wave-guide and its responses to geo-acoustic waves

ＣｏｎｆｉｎｅｄａｑｕｉｆｅｒａｓｗａｖｅｇｕｉｄｅａｎｄｉｔｓｒｅｓｐｏｎｓｅｓｔｏｇｅｏａｃｏｕｓｔｉｃｗａｖｅｓＷＥＮＢＩＮＪＩＡＮ１）（简文彬）ＢＡＯＲＥＮＣＨＥＮ２）（陈葆仁）ＨＵＡＦＵＬＵ２）（卢华复）１）Ｄｅｐａｒｔｍｅｎｔ...     

既有房屋饱和土地基极限承载力增长的探讨

饱和土地基在既有房屋长期荷载作用下,地基土强度参数值随着地基土的排水固结和压密而提高,地基极限承载力也同时增大,如何估算此提高值而挖掘其潜力,传统方法只是借助于统计回归讨论了设计承载力。本文从土力学基本原理出发,借助Prandtl假定,对既有房屋饱和土地基极限承载力的增长进行了探讨。     

岩体水力学基础(三)──岩体渗流场与应力场耦合的集中参数模型及连续介质模型

本文在分析了岩体系统的结构性和水力学特征后，提出了岩体渗流场与应力场耦合数学模型的机理分析、混合分析及系统辨识建模方法。运用系统辨识方法建立了岩体渗流场与应力场耦合的集中参数模型，并应用于解决实际问题；运用机理分析和混合分析方法建立了岩体渗流场与应力场双场耦合及与温度场三场耦合的连续介质分布参数模型。     

Inferring the relative measure of principal stress components

The phase velocity and the attenuation coefficient of compressional seismic waves, propagating in poroelastic, fluid-saturated, laminated sediments, are computed analytically from first principles. The wavefield is found to be strongly affected by the medium heterogeneity. Impedance fluctuations lead to poroelastic scattering; variations of the layer compressibilities cause inter-layer flow (a 1-D macroscopic local flow). These effects result in significant attenuation and dispersion of the seismic wavefield, even in the surface seismic frequency range, 10–100 Hz. The various attenuation mechanisms are found to be approximately additive, dominated by inter-layer flow at very low frequencies. Elastic scattering is important over a broad frequency range from seismic to sonic frequencies. Biot's global flow (the relative displacement of solid frame and fluid) contributes mainly in the range of ultrasonic frequencies. From the seismic frequency range up to ultrasonic frequencies, attenuation due to heterogeneity is strongly enhanced compared to homogeneous Biot models. Simple analytical expressions for the P -wave phase velocity and attenuation coefficient are presented as functions of frequency and of statistical medium parameters (correlation lengths, variances). These results automatically include different asymptotic approximations, such as poroelastic Backus averaging in the quasi-static and the no-flow limits, geometrical optics, and intermediate frequency ranges.     

Wide-angle seismic velocities in heterogeneous crust

Seismic velocities measured by wide-angle surveys are commonly used to constrain material composition in the deep crust. Therefore, it is important to understand how these velocities are affected by the presence of multiscale heterogeneities. The effects may be characterised by the scale of the heterogeneity relative to the dominant seismic wavelength (λ); what is clear is that heterogeneities of all scales and strengths bias wide-angle velocities to some degree. Waveform modelling was used to investigate the apparent wide-angle P -wave velocities of different heterogeneous lower crusts. A constant composition (50 per cent felsic and 50 per cent ultramafic) was formed into a variety of 1- and 2-D heterogeneous arrangements and the resulting wide-angle seismic velocity was estimated. Elastic, 1-D models produced the largest velocity shift relative to the true average velocity of the medium (which is the velocity of an isotropic mixture of the two components). Thick (width > λ) horizontal layers, as a result of Fermat's Principle, provided the largest increase in velocity; thin (width ≪λ) vertical layers produced the largest decrease in velocity. Acoustic 2-D algorithms were shown to be inadequate for modelling the kinematics of waves in bodies with multiscale heterogeneities. Elastic, 2-D modelling found velocity shifts (both positive and negative) that were of a smaller magnitude than those produced by 1-D models. The key to the magnitude of the velocity shift appears to be the connectivity of the fast (and/or slow) components. Thus, the models with the highest apparent levels of connectivity between the fast phases, the 1-D layers, produced the highest-magnitude velocity shifts. To understand the relationship between measured seismic velocities and petrology in the deep crust it is clear that high-resolution structural information (which describes such connectivity) must be included in any modelling.     

P-SH conversions in a flat-layered medium with anisotropy of arbitrary orientation

P-SH conversion is commonly observed in teleseismic P waves, and is often attributed to dipping interfaces beneath the receiver. Our modelling suggests an alternative explanation in terms of flat-layered anisotropy. We use reflectivity techniques to compute three-component synthetic seismograms in a 1-D anisotropic layered medium. For each layer of the medium, we prescribe values of seismic velocities and hexagonally symmetric anisotropy about a common symmetry axis of arbitrary orientation. A compressional wave in an anisotropic velocity structure suffers conversion to both SV -and SH -polarized shear waves, unless the axis of symmetry is everywhere vertical or the wave travels parallel to all symmetry axes. The P-SV conversion forms the basis of the widely used 'receiver function' technique. The P-SH conversion occurs at interfaces where one or both layers are anisotropic. A tilted axis of symmetry and a dipping interface in isotropic media produce similar amplitudes of both direct ( P ) and converted ( Ps ) phases, leaving the backazimuth variation of the P-Ps delay as the main discriminant. Seismic anisotropy with a tilted symmetry axis leads to complex synthetic seismograms in velocity models composed of just a few flat homogeneous layers. It is possible therefore to model observations of P coda with prominent transverse components with relatively simple 1-D velocity structures. Successful retrieval of salient model characteristics appears possible using multiple realizations of a genetic-algorithm (GA) inversion of P coda from several backazimuths. Using GA inversion, we determine that six P coda recorded at station ARU in central Russia are consistent with models that possess strong (> 10 per cent) anisotropy in the top 5 km and between 30 and 43 km depth. The symmetry axes are tilted, and appear aligned with the seismic anisotropy orientation in the mantle under ARU suggested by SKS splitting.     

多媒体创作工具Compel的应用

本文介绍了一种多媒体应用的创作工具。利用这种工具可以编辑和组织文字、图象、图表、声音以及视频等多种媒体元素。并通过媒体链接以及超级链接，完成多媒体应用的制作。同时，也介绍了多媒体应用的播放。