Using aerial photography and in situ measurements to estimate the quantity of macro-litter on beaches

This study has demonstrated a reliable method of quantifying the total mass of litter on a beach. It was conducted on Ookushi beach, Goto-Islands, Japan, and uses a combination of balloon-assisted aerial photography and in situ mass measurements. The total mass of litter over the beach was calculated to be 716 ± 259 kg. This figure was derived by multiplying the litter-covered area (calculated using balloon-assisted aerial photography) by the mass of litter per unit area. Light plastics such as polyethylene made up 55% of all plastic litter on the beach, although more work is needed to determine whether lighter plastics are transported to beaches more readily by winds and ocean currents compared with heavier plastics, or whether lighter plastics comprise a greater percentage of marine litter. Finally, the above estimates were used to calculate the total mass of metals released into coastal ecosystems via plastic litter on beaches.     

Evaluation of heavy metals and arsenic speciation discharged by the industrial activity on the Tinto-Odiel estuary, SW Spain

This study reports the annual amount of heavy metals discharged by industrial activity into the estuary of the Ría of Huelva (SW Spain). The findings showed that the discharged metals found in highest amounts were Fe (11 t y⁻¹), Zn (3.4 t y⁻¹) and Mo (0.88 t y⁻¹). There were other metals with high pollutant charge, such as Ti (232 kg y⁻¹), As (228 kg y⁻¹), Ni (195 kg y⁻¹), Pb (100 kg y⁻¹), Cr (39 kg y⁻¹) and Cd (33 kg y⁻¹). These results were compared with pollutants transported via the Tinto and Odiel rivers from abandoned mining activities in the Iberian Pyrite Belt (IPB), and it was deduced that the amounts spilled exclusively by industries were less than 1% in relation to the total discharge. Hence, the treatment of residues from the IPB should be the priority goal to improve water quality in the estuary.     

Spatial and temporal distribution of heavy metal concentrations in mussels (Mytilus edulis) from the Baie des Chaleurs, New Brunswick, Canada

Previous studies on heavy metal contamination of the Baie des Chaleurs focus only on industrial centers and overlooked the ecosystem as a whole. To fill this gap, the objective of this study is to establish a baseline of the spatio-temporal distribution of heavy metals in mussels from the Baie des Chaleurs based on the ecosystem approach. Our results show, for the first time, a cadmium contamination in mussels across the south coast of the Baie des Chaleurs and not only in industrial centers. Our results also confirm previous studies showing heavy metal contamination of the Belledune area. This study demonstrates that the use of the ecosystemic approach is essential to obtain a comprehensive picture of environmental contamination in marine ecosystems.     

Benthic foraminifera distribution in a tourist lagoon in Rio de Janeiro, Brazil: a response to anthropogenic impacts

Rodrigo de Freitas Lagoon, located in the Rio de Janeiro City, receives several types of polluted discharges. The knowledge of the sediment microfauna correlated with heavy metal and organic matter concentrations could supply important data about the conditions of the lagoon. The benthic foraminiferal assemblage presented larger diversity and more abundant samples in the lagoon entrance than in the inner area. The Ammonia tepida - Elphidiumexcavatum foraminiferal assemblage is characterized by dwarf, corroded and weak organisms. Agglutinated species were found only near the entrance. Low abundance values and sterility of five samples in the inner area (north/northeast) can be caused by high levels of heavy metals and organic matter. A. tepida shows negative correlation with increasing heavy metals values. PAHs and coprostanol high indexes, and the absence or low presence of microfauna in samples around the lagoon margin confirm illegal flows from gas stations and domestic sewage.     

Characterization and Application of Dried Plants to Remove Heavy Metals,Nitrate, and Phosphate Ions from Industrial Wastewaters

Low cost adsorbents were prepared from dried plants for the removal of heavy metals, nitrate, and phosphate ions from industrial wastewaters. The efficiency of these adsorbents was investigated using batch adsorption technique at room temperature. The dried plant particles were characterized by N₂ at 77 K adsorption, scanning electron microscopy, energy dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy, and phytochemical screening. The adsorption experiments showed that the microparticles of the dried plants presented a good adsorption of heavy metals, phosphate, and nitrate ions from real wastewaters. This adsorption increased with increasing contact time. The equilibrium time was found to be 30 min for heavy metals and nitrate ions and 240 min for phosphate ions. After the adsorption process, the Pb(II) concentrations, as well as those of Cd(II), Cu(II), and Zn(II) were below the European drinking water norms concentrations. The percentage removal of heavy metals, nitrates, and phosphates from industrial wastewaters by dried plants was ～94% for Cd²⁺, ～92% for Cu²⁺, ～99% for Pb²⁺, ～97% for Zn²⁺, ～100% for ${\rm NO}_{{\rm 3}}^{{-} } $ and ～77% for ${\rm PO}_{{\rm 4}}^{3{-} } $ ions. It is proved that dried plants can be one alternative source for low cost absorbents to remove heavy metals, nitrate, and phosphate ions from municipal and industrial wastewaters.     

Removal of Ni(II) Using Cation Exchange Resins in Packed Bed Column: Prediction of Breakthrough Curves

Sorptive removal of Ni(II) from electroplating rinse wastewaters by cation exchange resin Dueolite C 20 was investigated at the temperature of 30°C under dynamic conditions in a packed bed. The effects of sorbent bed length 0.1–0.2 m, fixed flow rate 6 dm³ min^?1, and the initial rinse water concentration (C₀) 53.1 mg L^?1 on the sorption characteristics of Dueolite C 20 were investigated at an influent pH of 6.5. More than 94.5% of Ni(II) was removed in the column experiments. The column performance was improved with increasing bed height and decreasing the flow rate. The Thomas, Yoon–Nelson, Clark, and Wolborska models were applied to the experimental data to represent the breakthrough curves and determine the characteristic design parameters of the column. The sorption performance of the Ni(II) ions through columns could be well described by the Thomas, Yoon–Nelson, and Wolborska models at effluent‐to‐influent concentration ratios (C/C₀) >0.03 and <0.99. Among the all models, the Clark model showed the least average percentage time deviation. The sorptive capacity of electroplating rinse water using Ni(II) was found to be 45.98 mg g^?1.     

Assessment of Water Quality in the Elbe River at Low Water Conditions Based on Factor Analysis

An assessment of water quality measurements during a long‐lasting low water period in the Elbe River is presented. Weekly samples were taken from May to December 2003 at a sampling site in the middle part of the Elbe River. For multivariate data analysis, 34 parameters of 46 samplings were considered. As a result of this analysis, 78% of the variance of the data set is explained by five factors. They can be assigned to the following latent variables: season (37.5%) > tributaries (12.7%) > re‐suspension (10.4%) > discharge (9.4%) > complexation (8.5%). For the investigated sampling site, two key processes were identified as dominating factors on the water quality during low water conditions. First, seasonal phytoplankton development caused changes in redox conditions with consequences for re‐solution of pollutants from sediments. Second, tributaries have a higher impact on the main stream, due to changes in mixing processes. Therefore, in addition to flood investigations, monitoring strategies, and management plans should be developed in order to survey changes in water quality during low water conditions.     

Rhizofiltration of a Heavy Metal (Lead) Containing Wastewater Using the Wetland Plant Carex pendula

Rhizofiltration is a subset technique of phytoremediation which refers to the approach of using plant biomass for removing contaminants, primarily toxic metals, from polluted water. The effective implementation of this in situ remediation technology requires experimental as well as conceptual insight of plant–water interactions that control the extraction of targeted metal from polluted water resources. Therefore, pot and simulation experiments are used in this study to investigate the rhizofiltration of a lead containing wastewater using plants of Carex pendula, a common wetland plant found in Europe. The metal contaminant extraction along with plant growth and water uptake rates from a wastewater having varying Pb concentration is studied experimentally for 2 wk. The temporal distribution of the metal concentration in the wastewater and the accumulated metal in different compartments of C. pendula at the end are analyzed using atomic absorption spectrometry. Parameters of the metal uptake kinetics are deduced experimentally for predicting the metal removal by root biomass. Further, mass balance equations coupled with the characterized metal uptake kinetics are used for simulating the metal partitioning from the wastewater to its accumulation in the plant biomass. The simulated metal content in wastewater and plant biomass is compared with the observed data showing a good agreement with the later. Results show that C. pendula accumulates considerable amounts of lead, particularly in root biomass, and can be considered for the cleanup of lead contaminated wastewaters in combination with proper biomass disposal alternatives. Also, the findings can be used for performing further non‐hydroponics experiment to mimic the real wetland conditions more closely.     

Assessment of Metal Pollution in Water and Surface Sediments of the Seyhan River,Turkey, Using Different Indexes

The aim of this study was to assess the level of heavy metals (Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) contamination and enrichment in the surface sediments of the Seyhan River, which is the receiving water body of both treated and untreated municipal and industrial effluents as well as agricultural drainage waters generated within Adana, Turkey. Sediment and water samples were taken from six previously determined stations covering the downstream of the Seyhan dam during both wet and dry seasons and the samples were then analyzed for the heavy metals of concern. When both dry and wet seasons were considered, metal concentrations varied significantly within a broad range with Al, 7210–33 967 mg kg^?1 dw; Cr, 46–122 mg kg^?1 dw; Cu, 6–57 mg kg^?1 dw; Fe, 10 294–26 556 mg kg^?1 dw; Mn, 144–638 mg kg^?1 dw; Ni, 82–215 mg kg^?1 dw; Pb, 11–75 mg kg^?1 dw; Zn, 34–146 mg kg^?1 dw in the sediments while Cd was at non‐detectable levels for all stations. For both seasons combined, the enrichment factor (EF) and the geo‐accumulation index (I_geo) for the sediments in terms of the specified metals ranged from 0.56 to 10.36 and ?2.92 to 1.56, respectively, throughout the lower Seyhan River. The sediment quality guidelines (SQG) of US‐EPA suggested the sediments of the Seyhan River demonstrated “unpolluted to moderate pollution” of Cu, Pb, and Zn, “moderate to very strong pollution” of Cr and Ni. The water quality data, on the other hand, indicated very low levels of these metals suggesting that the metal content in the surface sediments were most probably originating from fine sediments transported along the river route instead of water/wastewater discharges with high metal content.     

The chemical composition including the Rare Earth Elements of the three major glass types of Europe and the Orient used in late antiquity and the Middle Ages

Sets of 20 soda ash glasses, 16 soda lime glasses and 23 wood ash glasses mainly from excavations in Europe (additional soda ash glasses from Egypt) were analysed on 61 chemical elements. Average SiO₂ is about 62% in soda glasses and 50% in wood ash glasses. The three groups of glasses contain on average 13% Na₂O, 18% Na₂O and 13% K₂O as fluxes to lower the melting temperature of quartz at their production. The starting materials beside quartz were halophytic plant ash for soda ash glass, trona (Na₃H(CO₃)₂·2H₂O) and lime (clamshells) for soda lime glass and beech ash for wood ash glass. Each of the three major glass types contains specific Rare Earth Element (REE) concentrations mainly contained in quartz and its intergrown minerals. 50 Paleozoic and Mesozoic sandstones from Central Europe represent the quartz composition. The REE pattern of these glasses apparently indicates major compositional stages of the Continental Earth's Crust. The boron to lithium and sodium to potassium ratios as in seawater suggest reactions of materials for soda glass with seawater. Negative Ce anomalies in the three glasses are caused by reactions of quartz with seawater.