Petroleum geological dynamics of Lower Paleozoic in the Ordos Basin, northwest China

Taking the hydrocarbon source rocks of Ordovician, Lower Paleozoic in the Ordos Basin as the main research object, the characteristics of petroleum geological dynamics about geohistory, geothermal history, hydrocarbon generation history and hydrocarbon expulsion history were studied by using the methods of basin numerical modeling dynamically and pool-forming dynamics. It is shown that the Ordovician strata had entirely undergone five stages of initial deposition, uplift and erosion, rapid subsidence, alternating uplift and subsidence, and differential uplift and erosion; that under the background of lower heat flow on the whole, the paleoheat flow of Ordovician strata in the basin could be divided into two large stages of relatively high heat flow values period before Cretaceous deposition and relatively low ones after it; that the thermal evolution of organic matters in the hydrocarbon source rocks of Ordovician had entered into high mature-postmature stage on the whole and the intensity of gas generated was greater than that of oil generated, the hydrocarbon being mainly natural gas; and that the curves of the intensity of oil and gas expulsion at each time unit showed the feature of multi-peak-type, the accumulative intensity of gas expulsion was greater than that of oil expulsion. Thus natural gas exploration potential is good.     

Mantle heat flow and geotherms for major tectonic units in central Europe

The results of seismic measurements along the deep seismic sounding profile VII and terrestrial heat flow measurements used for construction of heat generation models for the crust in the Paleozoic Platform region, the Sudetic Mountains (Variscan Internides) and the European Precambrian Platform show considerable differences in mantle heat flow and temperatures. At the base of the crust variations from 440–510°C in the models of Precambrian Platform to 700–820°C for the Paleozoic Platform and the Variscan Internides (Sudets) are found. These differences are associated with considerable mantle heat flow variations.The calculated models show mantle heat flow of about 8.4–12.6 mW m^–2 for the Precambrian Platform and 31 mW m^–2 to 40.2 mW m^–2 for Paleozoic orogenic areas. The heat flow contribution originating from crustal radioactivity is almost the same for the different tectonic units (from 33.5 mW m^–2 to 37.6 mW m^–2). Considerable physical differences in the lower crust and upper mantle between the Precambrian Platform and the adjacent areas, produced by lateral temperature variations, could be expected. On the basis of carbon ratio data it can be concluded that the Carboniferous paleogeothermal gradient was much lower in the Precambrian Platform area than in the Paleozoic Platform region.     

Heat flow in Italy

More than fifty heat flow measurements in Italy are examined. The values, corrected only for local influences (when present), are related to the main geological features with the following results: foreland areas, 55±19 mW m^–2, foredeep areas, 45±21 mW m^–2; folded regions and intermountain depressions, 76±29 mW m^–2. In volcanic areas the heat flow rises to in excess of 600 mW m^–2. From a tectonic point of view, these values are consistent with the hypothesis that the Apennine chain is intersected by two arcuate structures: the first from Liguria to Latium is very probably a continental arc, that is an are which occurs within a continent, and the second from Campania to Calabria is very similar from geophysical evidence to the classic island arcs.     

Evolution model and formation mechanism of bio-thermocatalytic transitional zone gas

As a new genetic type of natural gas exploration area, the bio-thermocatalytic transitional zone gas (BTTZG) has been highly stressed by geologists both at home and abroad. Systematic study on the generation mechanism of hydrocarbon at the transitional zone is presented. Based on simulating experiments and geochemistry analysis of the source rock with lower evolution, a hydrocarbon-forming model at the transitional zone has been established. The mechanism is proposed that under the condition of low temperature and pressure combining with extremely active structural stress and clay mineral catalysis, BTTZG is formed by de-group of soluble organic matter and polarized compositions through orthocarbon ion as well as by condensation polymerization of aromatic ring-rich insoluble organic matter. This mechanism controls the formation of BTTZG, and furthermore, BTTZG is the product of superimposition and interaction of all the factors mentioned above.     

上地幔变黏度小尺度对流的数值研究

基于二维模型，利用有限元方法，研究上地幔-岩石圈系统的变黏度小尺度对流. 考虑该系统的黏度随温度以指数形式变化，数值结果表明，当黏度随温度变化较剧烈时，由于低温高黏度，系统的最上部物质不参与对流，系统发育形成一个类似于岩石圈的静止盖层. 计算表面热流、地形起伏及重力异常与对流格局有较好的相关性，高热流、上升地形对应于对流的上升区，反之低热流、下降地形与对流的下降区对应.     

RUNOFF GENERATION CHARACTERISTICS IN TYPICAL EROSION REGIONS ON THE LOESS PLATEAU

1 mTRODUCT1ONThe Loess Plateau in the central and westem China with an area of 430,(X)0 lQn2 is well known for itsancient cultUre and serious soil and water loss. About 287,(X)0 km2 of area in this region has an annualerosion be greatC than 1(XX) tlkIn2. The eroded soil totally amounts to more than 2.2 X l0' tons, amongwhich about l.6X 10' tons, on average, is delivered into the Yellow kiver mdeng the river one of thehighest sediment-laden rivers in the word. The serious soil erosion …     

Differential Thermal Regimes of the Tarim and Sichuan Basins in China: Implications for Hydrocarbon Generation and Conservation

The uncertainty surrounding the thermal regimes of the ultra-deep strata in the Tarim and Sichuan basins, China, is unfavorable for further hydrocarbon exploration. This study summarizes and contrasts the present-day and paleo heat flow, geothermal gradient and deep formation temperatures of the Tarim and Sichuan basins. The average heat flow of the Tarim and Sichuan basins are 42.5 ± 7.6 mW/m2 and 53.8 ± 7.6 mW/m2, respectively, reflecting the characteristics of ‘cold’ and ‘warm’ basins. The geothermal gradient with unified depths of 0–5,000 m, 0–6,000 m and 0–7,000 m in the Tarim Basin are 21.6 ± 2.9 °C/km, 20.5 ± 2.8 °C/km and 19.6 ± 2.8 °C/km, respectively, while the geothermal gradient with unified depths of 0–5,000 m, 0–6,000m and 0–7,000 m in the Sichuan Basin are 21.9 ± 2.3 °C/km, 22.1 ± 2.5 °C/km and 23.3 ± 2.4 °C/km, respectively. The differential change of the geothermal gradient between the Tarim and Sichuan basins with depth probably results from the rock thermal conductivity and heat production rate. The formation temperatures at depths of 6,000 m, 7,000 m, 8,000 m, 9,000 m and 10,000 m in the Tarim Basin are 80°C–190°C, 90°C–220°C, 100°C–230°C, 110°C–240°C and 120°C–250°C, respectively, while the formation temperatures at depths of 6,000 m, 7,000 m, 8,000 m and 9,000 m in the Sichuan Basin are 120°C–200°C, 140°C–210°C, 160°C–260°C and 180°C–280°C, respectively. The horizontal distribution pattern of the ultra-deep formation temperatures in the Tarim and Sichuan basins is mainly affected by the basement relief, fault activity and hydrothermal upwelling. The thermal modeling revealed that the paleo-heat flow in the interior of the Tarim Basin decreased since the early Cambrian with an early Permian abrupt peak, while that in the Sichuan Basin experienced three stages of steady state from Cambrian to early Permian, rapidly rising at the end of the early Permian and declining since the late Permian. The thermal regime of the Sichuan Basin was always higher than that of the Tarim Basin, which results in differential oil and gas generation and conservation in the ultra-deep ancient strata. This study not only promotes theoretical development in the exploration of ultra-deep geothermal fields, but also plays an important role in determining the maturation phase of the ultra-deep source rocks and the occurrence state of hydrocarbons in the Tarim and Sichuan basins.     

柳州新一代天气雷达通风系统的改进及应用

在柳州新一代天气雷达建设过程中，发现其通风系统存在不足及缺陷，通过分析其通风系统的设计及安装原理，提出了改进的措施，并应用到实际当中，取得了很好的效果。     

A Monte Carlo Model Of The Nocturnal Surface Temperatures In Urban Canyons

A model for the urban canyon is formulated for meteorologicalconditions of weak winds at night time. Thermal radiation, conductivity and convection are simulated by means of the Monte Carlo method. These are the main physical processesof energy transfer that give rise to the characteristic temperaturedistribution in these systems. The model has been satisfactory tested under ideal conditions for which analytical solutions exist.The predictions of the model under morerealistic conditions accurately reproduce the observationalresults. A strong temperature gradient across streets, with the canyon corners up to 4 °C warmer than the canyon centre, is found for the deepest canyons. This theoretical predictionhas been successfully verified with measurementstaken in a number of streets of the city of Granada in Spain.     

SEARCHING METHODS FOR RAPID GRID INTERPOLATION*

A widely used method for grid interpretation from a set of discrete sample points is based on the inverse distanceweighted model. This method requires the identification of k-nearest sample points for each grid point, probably the most time-consuming portion of the grid interpolation process. Three searching methods for identifying the k-nearest sample points are discussed and compared. Two of these methods were consistenty faster without sacrificing accuracy than the brute-force searching method, and one method was from one to over 90 times faster than the brute-force searching method.