Interannual Variability in Pollen Dispersal and Deposition on the Tropical Quelccaya Ice Cap*

Pollen collected from snow samples on the Quelccaya Ice Cap in 2000 and 2001 reveals significant interannual variability in pollen assemblage, concentration, and provenance. Samples from 2000, a La Niña year, contain high pollen concentrations and resemble samples from the Andean forests (Yungas) to the east. Samples from 2001, an El Niño year, contain fewer pollen and resemble those from the Altiplano. We suggest that varying wind patterns under different El Niño/Southern Oscillation (ENSO) conditions may affect the processes of pollen transport over the Altiplano and on the ice cap, although confounding variables such as flowering phenology and sublimation should also be considered     

Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.     

Bringing the other into political ecology: Reflecting on preoccupations in a research field

For all its vitality political ecology often appears to be a project in which work by Anglo‐Americans in particular, if it is not privileged, certainly predominates. This trend reflects wider language and intellectual tendencies in human geography and the social sciences that distort the development of the field by downplaying or obscuring the contributions of many non‐Anglo‐Americans and by naturalizing Anglo‐American assumptions at the heart of research. The latter in turn determine what constitutes ‘good’ work – even as there is no single definition of political ecology. Arguing against this tendency, this paper draws on postcolonial thinking to emphasize the need to reassess and reorient the field as ‘other’ political ecologies are feasible and desirable.     

Rapid generation of Digital Elevation Models from topographic maps

Abstract

In this article we demonstrate that substantial gains in time can be made when using point sampling rather than contour line digitising for generation of Digital Elevation Models (DEMs). A simple sampling scheme, based on regularly distributed points, was used supplemented with points near break-lines in the terrain. An evaluation of surfaces created with three different interpolation methods at three different resolutions shows that the statistical distribution was better when using points as opposed to contours, and that the accuracy was comparable despite the much smaller amount of input data.     

Watermarking of digital geospatial datasets: a review of technical,legal and copyright issues

Gathering data accounts for more than 80% of the cost of any GIS project. Fast Internet connections and digital datasets threaten the investments of data producers through data piracy. Outside the GIS community this problem has been known for a long time, and possible solutions exist for digital imagery, formatted text, 3D meshes and so on, showing possible links to typical spatial data. This is largely achieved through embedding hidden information in a dataset without producing perceptible changes in the data, a process known as watermarking. The producer can recover the embedded information on request in order to produce evidence of ownership in a court, so the overall strategy relies on a legal basis rather than technical ones. This paper analyses the state-of-the-art for watermarking protection in digital geographical datasets. Digital imagery is demonstrably a more mature area than geographical information, even with multiple commercial vendors offering watermarking protection. 2D vector and point datasets have received less attention from the research community; however, 3D meshes have been considered by the CAD community and a handful of techniques are available for that case, and they are reviewed here.     

Wavelet triangulated irregular networks

GIS applications have recently begun to emerge on the Internet. The management of three-dimensional geographic datasets in this distributed environment poses a particularly challenging problem, which highlights the need for a good data representation. This paper presents a new multiresolution data representation: the Wavelet Triangulated Irregular Network (WTIN). Compared to the traditional cell-based Digital Elevation Model (DEM) format and the Triangulated Irregular Network (TIN) format, it is more compact and suitable for scalable distributed GIS services. This format is based on the second-generation wavelet theory and is specially designed for geographical height field data. The modified Butterfly scheme is used for constructing the wavelet transform. For every point in the geographic surface, only a single wavelet coefficient is used, which makes the final data representation very efficient and easy to compress. Because the transform used in the data representation is a linear filter operation, the computational efficiency is better than other multiresolution data formats for terrain surfaces. Results from numerical experiments on real data are given to demonstrate that the proposed data representation can be efficiently implemented. The results show that the proposed WTIN data format can provide multiresolution data sets, which achieve significant compression while preserving geographical features. The quality is found to be quite acceptable for geographical terrain representation.     

Stratigraphic architecture of Solander Basin records Southern Ocean currents and subduction initiation beneath southwest New Zealand

Solander Basin is characterized by subduction initiation at the Pacific‐Australia plate boundary, where high biological productivity is found at the northern edge of the Antarctic Circumpolar Current. Sedimentary architecture results from tectonic influences on accommodation space, sediment supply and ocean currents (via physiography); and climate influence on ocean currents and biological productivity. We present the first seismic‐stratigraphic analysis of Solander Basin based on high‐fold seismic‐reflection data (voyage MGL1803, SISIE). Solander Trough physiography formed by Eocene rifting, but basinal strata are mostly younger than ca. 17 Ma, when we infer Puysegur Ridge formed and sheltered Solander Basin from bottom currents, and mountain growth onshore increased sediment supply. Initial inversion on the Tauru Fault started at ca. 15 Ma, but reverse faulting from 12 to ca. 8 Ma on both the Tauru and Parara Faults was likely associated with reorganization and formation of the subduction thrust. The new seabed topography forced sediment pathways to become channelized at low points or antecedent gorges. Since 5 Ma, southern Puysegur Ridge and Fiordland mountains spread out towards the east and Solander Anticline grew in response to ongoing subduction and growth of a slab. Solander Basin had high sedimentation rates because (1) it is sheltered from bottom currents by Puysegur Ridge; and (2) it has a mountainous land area that supplies sediment to its northern end. Sedimentary architecture is asymmetric due to the Subtropical Front, which moves pelagic and hemi‐pelagic sediment, including dilute parts of gravity flows, eastward and accretes contourites to the shelf south of Stewart Island. Levees, scours, drifts and ridges of folded sediment characterize western Solander Basin, whereas hemi‐pelagic drape and secondary gravity flows are found east of the meandering axial Solander Channel. The high‐resolution record of climate and tectonics that Solander Basin contains may yield excellent sites for future scientific ocean drilling.     

Low‐accommodation and backwater effects on sequence stratigraphic surfaces and depositional architecture of fluvio‐deltaic settings (Cretaceous Mesa Rica Sandstone,Dakota Group,USA)

The adequate documentation and interpretation of regional‐scale stratigraphic surfaces is paramount to establish correlations between continental and shallow marine strata. However, this is often challenged by the amalgamated nature of low‐accommodation settings and control of backwater hydraulics on fluvio‐deltaic stratigraphy. Exhumed examples of full‐transect depositional profiles across river‐to‐delta systems are key to improve our understanding about interacting controlling factors and resultant stratigraphy. This study utilizes the ~400 km transect of the Cenomanian Mesa Rica Sandstone (Dakota Group, USA), which allows mapping of down‐dip changes in facies, thickness distribution, fluvial architecture and spatial extent of stratigraphic surfaces. The two sandstone units of the Mesa Rica Sandstone represent contemporaneous fluvio‐deltaic deposition in the Tucumcari sub‐basin (Western Interior Basin) during two regressive phases. Multivalley deposits pass down‐dip into single‐story channel sandstones and eventually into contemporaneous distributary channels and delta‐front strata. Down‐dip changes reflect accommodation decrease towards the paleoshoreline at the Tucumcari basin rim, and subsequent expansion into the basin. Additionally, multi‐storey channel deposits bound by erosional composite scours incise into underlying deltaic deposits. These represent incised‐valley fill deposits, based on their regional occurrence, estimated channel tops below the surrounding topographic surface and coeval downstepping delta‐front geometries. This opposes criteria offered to differentiate incised valleys from flood‐induced backwater scours. As the incised valleys evidence relative sea‐level fall and flood‐induced backwater scours do not, the interpretation of incised valleys impacts sequence stratigraphic interpretations. The erosional composite surface below fluvial strata in the continental realm represents a sequence boundary/regional composite scour (RCS). The RCS’ diachronous nature demonstrates that its down‐dip equivalent disperses into several surfaces in the marine part of the depositional system, which challenges the idea of a single, correlatable surface. Formation of a regional composite scour in the fluvial realm throughout a relative sea‐level cycle highlights that erosion and deposition occur virtually contemporaneously at any point along the depositional profile. This contradicts stratigraphic models that interpret low‐accommodation settings to dominantly promote bypass, especially during forced regressions. Source‐to‐sink analyses should account for this in order to adequately resolve timing and volume of sediment storage in the system throughout a complete relative sea‐level cycle.     

Magma Origin and Evolution of Tengchong Cenozoic Volcanic Rocks from West Yunnan,China: Evidence from Whole Rock Geochemistry and Nd‐Sr‐Pb Isotopes

Tengchong Cenozoic volcanics that have record key information on the tectonic evolution and mantle features of the southeast margin of the Tibetan Plateau are of great importance because of its unique eruption history spanning the entire Quaternary period. Magma origin and evolution of Tengchong Cenozoic volcanic rocks were studied on the basis of Nd-Sr-Pb isotope and major and trace element data from different eruptions in the Ma’anshan area. Different samples within one eruption show relative identical lithologies, chemical and isotopic compositions. However, the geochemical features for the five eruptions are distinct from each other. These volcanic rocks show low Mg# values (<45), moderate to high fractionation of LREEs and HREEs, and enrichment of Pb and Ba and depletion of Nb. Tengchong Cenozoic volcanic rocks were derived from an enriched mantle based on Nd-Sr-Pb isotopic studies. And lines of evidence show that crustal contamination should be involved before the eruption of different periods of Tengchong Cenozoic volcanic rocks. Older subducted components may be responsible for adakite recycling at various stages of evolution, which results in the origin of the enriched mantle source magma accounting for the isotopic features of Tengchong Cenozoic volcanic rocks. Segregated primitive magma pulsating injected into magma chamber, fractional crystallized and contaminated with crust component. Finally, magmas with distinct chemical and isotopic compositions for each eruption formed. The extension of the northeast segment of the Yingjiang tectonic belt triggered the pulsating eruption of the Cenozoic volcanics in the Tengchong area.     

Modelling controls on aeolian dune‐field pattern evolution

A second‐generation, source‐to‐sink cellular automaton‐based model presented here captures and quantifies many of the factors controlling the evolution of aeolian dune‐field patterns by varying only a small number of parameters. The role of sediment supply, sediment availability and transport capacity (together defined as sediment state) in the development and evolution of an aeolian dune‐field pattern over long time scales is quantified from model simulations. Seven dune‐field patterns can be classified from simulation results varying the sediment supply and transport capacity that control the type and frequency of dune interactions, the sediment availability of the system and, ultimately, the development of dune‐field patterns. This model allows predictions to be made about the range of sediment supply and wind strengths required to produce the dune‐field patterns seen in the real world. A new clustered dune‐field pattern is identified from model results and used to propose an alternative mechanism for the formation of superimposed dunes. Bedforms are hypothesized to cluster together, simultaneously forming two spatial scales of bedforms without first developing a large basal dune with small superimposed dunes. Manipulation of boundary conditions produces evolving dune fields with different spatial configurations of sediment supply. Trends of spacing and crest length increase with decreasing variability as the dune field matures. This simple model is a valuable tool which can be used to elucidate the dominant control of aeolian sediment state on the construction and evolution of aeolian dune‐field patterns.