一种机载雷达点云数据的快速分类方法

机载激光雷达扫描技术可以以点云形式快速获取地形表面高精度三维信息。基于激光雷达扫描数据及建筑物本身的拓扑信息就可以对建筑物进行精确的重建,而重建中最关键的技术是对点云数据进行分类,进而进行地物识别。对大规模三维点云数据进行快速分类,提出一种采用区域分割结合基于最小二乘平差的多项式拟合方法,将大量离散的三维点云分割后进行多项式拟合,并将二维数据分类转化为一维数据分类。在分类的基础上,将建筑物几何规则作为约束条件提取了房屋边缘。实验分析表明,该方法既能去除多余噪声,又能有效保留特征点,分类的总误差率低于3%。     

软土地区双线区间盾构隧道施工对周边地表以及建筑物沉降的影响

研究盾构隧道施工对周围地面以及建筑物沉降造成的影响,是软土地区盾构隧道安全施工和正常运营的基础课题。为了分析宁波轨道交通5号线同德路站—石碶站区间双线盾构隧道施工对周边地表和建筑物的影响,本文在建立盾构隧道动态施工过程三维有限元模型的基础上,基于地表以及建筑物沉降数值模拟结果与现场监测值的对比,分析了隧道开挖对隧道周围地表沉降与建筑物沉降的影响。结果表明,掘进完成时,开挖方向沉降槽往上行线隧道方向偏移、呈现倒梯形形态,横断面影响区域为距离双线隧道轴线中心小于3倍隧道直径;上行线在下行线开挖后并不会增加地表沉降,但增大了沉降槽宽度;下行线到达前产生的沉降占最终累计沉降的67%;当盾构掘进面刚到达建筑物时、建筑物的倾斜方向与盾构掘进方向一致,当盾构掘进面离开建筑物时、建筑物将沿着盾构掘进的反方向倾斜;建筑物两侧沉降值较中部沉降值降低了83%;双线贯通后建筑物沉降呈“U”形分布,最大沉降量发生在远离隧道一侧距建筑物中心0.5 m处。     

地磁台站建设中磁测异常现象分析

地磁台建设磁性跟踪测试工作很重要,通过对跟踪磁测中发现的一个异常现象的分析,计算了不同重量、距离的铁磁性物质对磁房建筑场地磁场的影响,讨论了排除施工现场磁性干扰的一些办法,并得出各种重量铁磁性物质与磁房建筑物的安全距离,还讨论了地磁台部分建筑材料的选择问题。     

A comparative study of the design spectra defined by Eurocode 8, UBC, IBC and Turkish Earthquake Code on R/C sample buildings

Earthquake codes have been revised and updated depending on the improvements in the representation of ground motions, soils and structures. These revisions have been more frequently seen in recent years. One of the key changes in earthquake codes has been performed on the design spectra. In this paper, the design spectra recommended by Turkish Earthquake Code and three other well known codes (Uniform Building Code, Eurocode 8, and International Building Code) are considered for comparison. The main purpose of this study is to investigate the differences caused by the use of different codes in the dynamic analysis and seismic verification of given types of buildings located at code defined different sites. The differences in expressions and some important points for elastic and inelastic spectra defined by the codes are briefly illustrated in tables and figures. Periods, base shears, lateral displacements and interstory drifts for the analyzed buildings located at code defined ground type are comparatively presented.     

Rescue Operations and Demolition Works: Automating the Pneumatic Removal of Small Pieces of Rubble and Combination of Suction Plants with Demolition Machines

The main problem in the rescue of people buried alive in damaged buildings are pieces of rubble with a diameter less than 150 mm. Since they cover the whole site, it is neither possible to scrutinize the structure of the rubble nor to estimate the dimensions of beams, columns, and parts of ceilings. The central idea of a project at the University of Karlsruhe, Institute for Technology and Management in Construction, is the automatic removal of small pieces of rubble by a suction unit. The computer-controlled pipe which is fastened to the boom of an excavator automatically follows the structure of the heap of rubble. Therefore, it can also work in areas which are out of the driver’s visible range. The suction plant replaces the dangerous manual removal which is current standard. Furthermore, a pneumatic extraction system has been designed and constructed in combination with demolition machinery, e.g. crushers and dry wire-saw technologies, to immediately suck off the crushed material (reinforced concrete, masonry).     

带深桩基础高层建筑结构的地震动输入问题

带深桩基础高层建筑结构的地震反应分析通常按刚性地基假定选择地震动输入,其合理性一直受到工程界关注。本文探讨了此类结构考虑桩-土-结构相互作用的整体有限元分析的地震激励施加、单元网格划分、积分步长确定、边界处理等问题,通过整体有限元分析模型和常规分析模型的算例分析对比,探讨了常规地震动输入方法的合理程度。结果表明,常规输入法总体偏于安全,是基本可行的,但可能低估结构底部几层的地震反应,应引起注意。     

模糊综合评判在高层建筑结构地震作用下的应用

应用模糊数学原理,将我国现行建筑抗震设计规范(GB 50011-2001)划分场地类别的依据模糊化,用正态分布作为等效剪切波速与覆盖层厚度的隶属函数,对不同场地条件特征周期值进行模糊综合评判,给出了高层建筑结构地震作用计算步骤。结果表明,模糊综合评判方法使得建筑抗震设计中的设计反应谱更符合实际,高层建筑结构地震作用的计算更为准确。     

2007年7月20日新疆特克斯5．7级地震烈度与房屋震害

介绍了2007年7月20日新疆特克斯5．7级地震的现场考察结果。该地震的宏观震中位于受灾最严重的特克斯县喀拉达拉乡琼库什台村东侧,极震区烈度为7度,圈定出6度1条等震线。同时归纳分析了灾区各类房屋建筑的震害特征及其破坏原因,并对该地区房屋的防震减灾研究提出了建议。     

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.     

建筑抗震实时混合试验时滞补偿方法研究综述

时滞补偿是建筑抗震实时混合试验的重要问题。文章对时滞补偿方法的研究进行总结,将时滞补偿方法分为基于时间的位移预测时滞补偿方法、基于反馈力的位移预测时滞补偿方法、基于加载系统模型求逆的时滞补偿方法、基于控制理论的时滞补偿方法和基于集成理念的综合补偿方法。