Simplified Method for the Assessment of the Stiffness Anisotropy of Rocks at Small Strains

Summary A new, practically applicable method for characterizing the stiffness anisotropy of rocks is presented. The anisotropy of geo-materials is often ignored in engineering applications, with potentially serious ramifications, because of the number of parameters required for characterization. The elastic anisotropy has often been considered to be a function of mathematical symmetry, and the restrictions due to layering, microcracking and granularity of the materials have not been considered in the assessment of the anisotropy. The practicality of the method proposed here is achieved by rationally reducing the number of independent anisotropy parameters, typically 9 for orthotropic anisotropy, to a system of 4 independent parameters through a systematic theoretical and experimental analysis of these structural restrictions. These 4 parameters are shown to be sufficient for describing the anisotropy of some rocks and sands at small strains, and parameter determination by back-analysis is demonstrated to be stable using appropriate measurement systems involving 9 elastic wave velocities even when the directions of anisotropic axes are unknown and the velocity data contains appreciable error.     

Modeling the influence of settling velocity on cohesive sediment transport in Tanshui River estuary

Settling velocities of suspended cohesive sediment in estuaries vary over a range of several orders in magnitude. Variations in the suspended sediment concentration are often considered as the principal cause. Turbulence and the suspended sediment concentration, as well as other factors such as salinity, dissolved organic substances, flocculation ability, and the rate of floc growth affect setting velocities. A laterally–averaged finite difference model for hydrodynamics and cohesive sediment transport is developed and applied in the Tanshui River estuary, Taiwan. The model has been calibrated and verified with water surface elevation, longitudinal velocity, salinity, and cohesive sediment measured. The overall performance of the model is in qualitative agreement with the available data. The model is used to investigate the influence of settling velocity on cohesive sediment transport dynamics. The simulation indicates that the turbidity maximum zone is near Kuan–Du. When settling velocities increase the surface cohesive sediment concentration at Kuan–Du station trends to decrease and bottom cohesive sediment concentration increases. Both surface and bottom cohesive sediment concentrations decrease at Taipei Bridge and Pa–Ling Bridge. This implies that suspended sediment advected seaward and deposited. There is consequently a net seaward flux of suspended sediment near surface, and a net landward flux near the bed.     

Quantum-thermodynamic treatment of intrinsic anharmonicity; Wallace’s theorem revisited

Wallace (in Thermodynamics of crystals, 1972) developed a theorem, rooted in rigid lattice dynamics, which incorporates intrinsic anharmonic effects in solids. The practical application of this theorem in mineral physics is computationally involved and this is the main reason for the theorem not getting the attention it deserves. Because intrinsic anharmonicity is an important issue at the extreme conditions in planetary mantles, we derived a method which removes the computational obstacles in applying this theorem. We extended the theorem to incorporate details of the phonon spectrum and tested our algorithm on forsterite (Mg₂SiO₄). Using a least squares inversion technique applied to all available experimental data, we show that it results in an accurate representation of thermodynamic properties and sound wave velocities of Mg₂SiO₄ in its complete pressure–temperature stability range. We also show that the accuracy of our results is not significantly affected by the use of a different equation of state.     

Sedimentary aspects and paleoenvironmental evolution of a rift basin: Salta Group (Cretaceous–Paleogene), northwestern Argentina

The rift history of the Salta basin is related to the evolution of the Central Andes and to the activity of the Pacific margin, owing to its geographic location. Sedimentation occurred from the Neocomian to the Paleogene, with deposits reaching up to 5,000 m in thickness. Paleoenvironmental analysis reveals an evolutionary history controlled by tectonic and climatic changes. Isolated grabens characterized the early synrift stage; differential subsidence provoked distinct environments in the southern and northern subbasins. In the southern subbasins, alluvial-fan, fluvial-fan and lacustrine deposits prevail, whilst in the northern subbasins eolian and fluvial environments dominate. During the Maastrichtian, two major factors controlled the basin fill: the decrease in tectonic subsidence and a relative sea-level rise as recorded in South America. An extensive and shallow Atlantic marine ingression installed a carbonate system coincident with mainly humid conditions until the Danian. Until the Middle Eocene, the fluvial and lacustrine environmental evolution of the sag basin was controlled especially by the alternation of temperate with dry and humid periods. Paleontological records reflect these climatic changes and show their relationship to the sedimentation regime.     

拉萨地体内低速异常成因的探讨--壳内局部熔融的地震层析证据

青藏高原南部天然地震体波的层析反演图像描绘出拉萨地体内在15～90km深度内低速异常的分布特征。在研究速度结构的基础上，根据熔融程度与纵波波速呈倒数衰减的特性，论证了拉萨地体中低速体的出现与壳内的局部熔融有关。壳内局部熔融则来源于板块俯冲、地壳增厚产生的热而非幔源侵入所造成。同时，也发现了在拉萨以东中下地壳低速体有向东发展的趋势。大面积部分熔融层分布的深度范围约在15～35km处。另外，据藏南地区的SKS波分裂时间延迟很小的特点，推测藏南地幔中可能不存在各向异性，也就是没有足够的热源使各向异性矿物的品格重新定位。这从另一方面佐证了部分熔融仅存在于地壳内而不是地幔中。     

泥石流运动衰减动力学初步研究

我国公路泥石流病害严重，泥石流淤埋公路构建筑物是一类常见的公路泥石流病害类型。泥石流衰减动力学是防治泥石流淤埋病害的重要关键技术，也是泥石流运动学、动力学研究的核心问题之一。本文作者运用泥沙运动力学及流体力学原理，初步建立了泥石流固相颗粒和液相浆体的能量衰减条件，把泥石流衰减模式概化为两类，即能量抑制衰减和能量自由衰减；通过泥石流沉积模型试验，得到了不同粘度泥石流体的沉积扇变化形态，随着泥石流体粘度的增大，沉积扇边缘变陡、扩展范围变小、纵轴线长度减小等结论与实际情况吻合；初步建立了泥石流能量衰减速率计算方法。研究成果为防治公路泥石流病害奠定了基础。     

Permo-Carboniferous Radiolarians from the Wupata＇erkan Group, Western South Tianshan, Xinjiang, China

The Wupata‘erkan Group, also called Wupata‘erkan Formation, distributed in the South Tianshan, Xinjiang,China, mainly consists of gray and dark gray fine-grained clastic rocks, interlayered with volcanic rocks, carbonates and cherts. Some ultra-basic rocks (blocks) punctuate the formation. The formation was variously assigned to Silurian-Middle Devonian, Silurian-Lower Devonian, and pre-Devonian, mainly based on Atrypa bodini Mansuy, Hypothyridina parallelepipedia (Brour.) and Prismatophyllum hexagonum Yoh collected from the limestone interlayers, respectively.However, radiolarian fossils obtained from 24 chert specimens of the Wupata‘erkan Group, mainly include Albaillella sp.cf. A. undulata Deflandre, Albaillella sp. cf. A. paradoxa Deflandre, Albaillella cf. A. deflandrei Gourmelon, Albaillella sp. cf. A. indensis Won, Albaillella sp. cf. A. excelsa Ishiga, Kito and Imoto, Albaillella sp. and Latentifistulidae gen. et. sp.indet., are earliest Carboniferous and Late Permian. The earliest Carboniferous assemblage is characterized by Albaillella sp. cf. A. undulata Deflandre, Albaillella sp. cf. A. paradoxa Deflandre, Albaillella cf. A. deflandrei Gourmelon and Albaillella sp. cf. A. indensis Won, and the Late Permian assemblage by Albaillella sp. cf. A. excelsa Ishiga, Kito and Imoto. This new stratigraphic evidence indicates that the Wupata‘erkan Group is possibly composed of rocks with different ages from Silurian to Permian, and therefore, it is probably an ophiolite mrlange. The discovery of Late Permian Albaillella sp. cf. A. excelsa provides more reliable evidence supporting the existence of a Permian relic ancient oceanic basin in the western part of Xinjiang South Tianshan.     

Investigation into the effect of fault properties on wave transmission

The estimation of wave transmission across the fractured rock masses is of great importance for rock engineers to assess the stability of rock slopes in open pit mines. Presence of fault, as a major discontinuity, in the jointed rock mass can significantly impact on the peak particle velocity and transmission of blast waves, particularly where a fault contains a thick infilling with weak mechanical properties. This paper aims to study the effect of fault properties on transmission of blasting waves using the distinct element method. First, a validation study was carried out on the wave transmission across a single joint and different rock mediums through undertaking a comparative study against analytical models. Then, the transmission of blast wave across a fault with thick infilling in the Golgohar iron mine, Iran, was numerically studied, and the results were compared with the field measurements. The blast wave was numerically simulated using a hybrid finite element and finite difference code which then the outcome was used as the input for the distinct element method analysis. The measured uplift of hanging wall, as a result of wave transmission across the fault, in the numerical model agrees well with the recorded field measurement. Finally, the validated numerical model was used to study the effect of fault properties on wave transmission. It was found that the fault inclination angle is the most effective parameter on the peak particle velocity and uplift. Copyright © 2017 John Wiley & Sons, Ltd.     

Stress‐dependent elastic wave velocity of microfractured sandstone

A model for the stress‐dependent elastic wave velocity response of fractured rock mass is proposed based on experimental evidence of stress‐dependent fracture normal and shear stiffness. Previously proposed models and previous experimental studies on stress‐dependent fracture stiffness have been reviewed to provide a basis for the new model. Most of the existing stress‐dependent elastic wave velocity models are empirical, with model parameters that do not have clear physical meanings. To propose the new model, the rock mass is assumed to have randomly oriented microscopic fractures. In addition, the characteristic length of microfractures is assumed to be sufficiently short compared to the rock mass dimensions. The macroscopic stress‐dependent elastic wave velocity response is assumed to be attributed to the stress dependency of fracture stiffness. The stress‐dependent fracture normal stiffness is defined as a generalized power law function of effective normal stress, which is a modification of the Goodman's model. On the other hand, the stress dependency of fracture shear stiffness is modeled as a linear function of normal stress based on experimental data. Ultrasonic wave velocity responses of a dry core sample of Berea sandstone were tested at effective stresses ranging from 2 to 55 MPa. Visual observation of thin sections obtained from the Berea sandstone confirms that the assumptions made for microstructure of rock mass model are appropriate. It is shown that the model can describe the stress‐dependent ultrasonic wave velocity responses of dry Berea sandstone with a set of reasonable material parameter values. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Soil pipe flow tracer experiments: 1. Connectivity and transport characteristics

Much debate has occurred in catchment hydrology regarding the connectivity of flow paths from upslope areas to catchment outlets. This study was conducted in two catchments, one with three upper branches, in a loess soil with a fragipan that fosters lateral flow and exhibits an extensive distribution of soil pipe collapse features. The study aimed to determine the connectivity of multiple soil pipe networks as well as determine pipe flow velocities during storm events. Fluorescein dye was injected directly into soil pipes at the upper most pipe collapse feature of four different hillslopes. Breakthrough curves (BTC) were determined by sampling multiple pipe collapse features downslope. The BTCs were used to determine the ‘average’ (centre of mass) and ‘maximum’ (first arrival) flow velocities. This study confirmed that these catchments contain individual continuous soil pipe networks that extend over 190 m and connect the upper most hillslopes areas with the catchment outlet. While the flow paths are continuous, the individual pipe networks consist of alternating reaches of subsurface flow through soil pipes and reaches of surface flow through gullies formed by pipe collapses. In addition, flow can be occurring both through the subsurface soil pipes simultaneous with surface flow generated by artesian flow from the soil pipes. The pipe flow velocities were as high as 0.3 m/s, which was in the range of streamflow velocities. These pipe flow velocities were also in the range of velocities observed in pinhole erosion tests suggesting that these large, mature soil pipes are still actively eroding. Copyright © 2015 John Wiley & Sons, Ltd.