Delineation of groundwater potential zones using remote sensing and GIS-based data-driven models

The rapid increase in human population has increased the groundwater resources demand for drinking, agricultural and industrial purposes. The main purpose of this study is to produce groundwater potential map (GPM) using weights-of-evidence (WOE) and evidential belief function (EBF) models based on geographic information system in the Azna Plain, Lorestan Province, Iran. A total number of 370 groundwater wells with discharge more than 10 m³s^?1were considered and out of them, 256 (70%) were randomly selected for training purpose, while the remaining114 (30%) were used for validating the model. In next step, the effective factors on the groundwater potential such as altitude, slope aspect, slope angle, curvature, distance from rivers, drainage density, topographic wetness index, fault distance, fault density, lithology and land use were derived from the spatial geodatabases. Subsequently, the GPM was produced using WOE and EBF models. Finally, the validation of the GPMs was carried out using areas under the ROC curve (AUC). Results showed that the GPM prepared using WOE model has the success rate of 73.62%. Similarly, the AUC plot showed 76.21% prediction accuracy for the EBF model which means both the models performed fairly good predication accuracy. The GPMs are useful sources for planners and engineers in water resource management, land use planning and hazard mitigation purpose.     

树状河系主流的自动推理

分析了不同类型河系的空间特征,对非网状河系以180°假设和锐角假设为基础,改进了自动确定河段流向的定量化决策表,当出现流向冲突时,遵守少数服从多数的原则。参考河段的流向、节点处分支河段的累计河段数和累计长度,能自动推理出树状河系的主支流关系。在此基础上,进一步研究了树状河系的编码方法,并用实例验证了所提出的算法。     

Geographical information system-based groundwater quality index assessment of northern part of Kolkata,India for drinking purpose

Groundwater is a resource under stress. In both developed and developing countries, it has been found that increasing human influence has led to the contamination of the groundwater resource. To understand the magnitude of this problem, a study was conducted in 58 wards within Northern part of Kolkata, India, where water samples from tube wells were collected and analysed on essential drinking water quality parameters, prescribed by WHO. Using Principal component analysis, and Water quality index mapping, the aforementioned results have been interpreted. This has helped to depict that not only is the groundwater unsuitable for drinking, but that the parametric values have a tendency to increase abruptly within the shortest of ranges, indicating urban pollution as the root cause of contamination. This paper shall thus discuss the spatial change in groundwater quality in northern Kolkata and suggest measures which might be implemented to secure a sustainable future for the city.     

RTK技术在沛县新城区图根控制测量中的应用

叙述了RTK技术在沛县新城区图根控制测量中的应用,通过比较分析说明：RTK的测量精度完全能够满足1：500地形测图图根控制的精度要求。     

基于水流路径分析的雪线数字提取

基于水流路径分析的思路,提出一种雪线自动提取方法。该方法利用对水流路径上积雪覆盖信息逐像元对比,记录最下点位置形成积雪区下边缘点,顺次连接各点形成雪线;在此基础上,探讨了多年平均雪线的求算。研究表明,该方法可避免雪盖内部积雪空缺区域对下边缘线提取的影响,较好地提取积雪区的下边缘线,初步实现了雪线的数字提取;并可较为方便地进行多个时期雪线的时空变化对比分析。利用该方法并结合遥感影像数据,可为大范围雪线时空分异信息的快速、准确提取与分析奠定基础。     

Identifying local spatial association in flow data

In this paper we develop a spatial association statistic for flow data by generalizing the statistic of Getis-Ord, G _i (and G _i ^*). This local measure of spatial association, G _ij, is associated with each origin-destination pair. We define spatial weight matrices with different metrics in flow space. These spatial weight matrices focus on different aspects of local spatial association. We also define measures which control for generation or attraction nonstationarity. The measures are implemented to examine the spatial association of residuals from two different models. Using the permutation approach, significance bounds are computed for each statistic. In contrast to the G _i statistic, the normal approximation is often appropriate, but the statistics are still correlated. Small sample properties are also briefly discussed. Received: 18 February 1998/Accepted: 29 September 1998     

1∶10000图库一体化数据的质量控制

根据1∶10 000图库一体化数据成果,对图库一体化数据生产过程中各个环节的质量控制进行探讨,提出了一体化数据的质量控制方法。     

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area, Yitong Basin, Northeast China

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China. This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections, and summarized 12 major types of lithofacies and three types of lithofacies associations: (1) the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates; (2) the middle zone is dominated by various gravity flow deposits and traction flow deposits; and (3) the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites. Combining with the grain size cumulative probability curves analysis, we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin, and further proposed a lacustrine slope apron model that is characterized by (1) an inconstant multiple source (line source), (2) an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system, and (3) the transformation of sandy debris flow deposits into distal turbidity current deposits. This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.     

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.     

The Geothermal Study of the Mid-Segment of the Tancheng-Lujiang Fault Zone and Its Neighboring Region

In this paper,25 new terrestrial heat flow values newly observed along the mid-segment of the Tancheng-Lujiang fault zone are listed.With these geothermal data and 37 other terrestrial heat flow values(previously published),we describe the distribution features of terrestrial heat flows in the area.In this research,the two-dimensional temperature structure from the surface to lithospheric bottom of the Huaibei-Sixian-Jinhu profile is inferred by using the finite-element method and the temperature and heat flow of sedimentary,granitic,and basaltic layers is calculated.