冲绳海槽海底地形的补偿模式研究Ⅱ.冲绳海槽均衡响应函数的地质解释

本文从区域补偿模式和实验均衡理论出发,利用重力和地形资料计算了冲绳海槽的均衡响应函数.结果表明,冲绳海槽南段弹性板有效厚度和补偿深度明显大于中段.结合其他地质地球物理资料解释认为,产生这种差异的原因主要是南、中两段岩石圈温度和补偿机制的不同所致.     

河西内陆河径流对气候变化的响应及其流域适应性水资源管理研究

为探讨河西地区内陆河径流对气候变化的响应, 选取1955-2008年石羊河、黑河和疏勒河的河流流量资料进行计算和分析. 结果表明: 50多年来, 石羊河年径流总体呈明显下降趋势, 黑河呈略有增加趋势, 疏勒河呈明显增加趋势, 地域上呈现愈往西部的河流年径流量增加愈明显. 三大河流进入1990年代后有下降趋势, 进入21世纪均有明显增多趋势. 三大河流径流对气候变化有不同响应, 石羊河流域主要受季风气候影响, 气候变暖, 蒸发加剧, 水分散失量大, 是造成径流减少的主要原因;黑河和疏勒河流域主要受西风带环流影响, 径流增多的重要原因是气候变暖降水明显增多. 为减缓气候变化对流域水资源利用的不利影响, 在分析三大内陆河流量对气候变化响应特征的基础上, 提出了适应性水资源管理的建议. 建议应提高水资源利用效率;改变生产方式, 调整农业种植业结构与布局;加大祁连山自然保护区建设, 搞好水资源可持续利用;积极开发祁连山丰富的空中云水资源、哺育祁连山冰川等流域适应性水资源管理对策, 对流域进行综合治理与开发利用, 这些措施和对策将为流域水资源开发提供科学依据.     

台湾岛附近海洋对0908号台风“莫拉克”的响应特征

在模拟2009年登陆我国东部沿海的台风"莫拉克"的基础上,利用AVHRR/AMSR和SODA再分析数据和模拟结果,初步评估了GRAPES-ECOM海-气耦合模式(上海台风研究所基于GRAPES-TCM区域台风模式和ECOM海洋模式开发而成)模拟台风期间海洋响应的能力,并分析了台风期间台湾岛周围海域的海温、上升流、中尺度冷涡等的变化特点。分析结果表明,GRAPES-ECOM耦合模式较好地模拟了表层海温对台风的响应,与深水海洋响应比较,揭示了近海对台风响应的一些新特征:(1)在台湾以东海域,台风活动改变了黑潮海域海水的垂直运动,诱导黑潮南部沿岸上升流,而北部先于台风存在的上升流减弱,导致不同水深海温的最大降温位置都出现在路径左侧,与深海偏向路径右侧不同;(2)位于台湾岛东北面的彭佳屿冷涡因其形成与大陆架和黑潮有关,当台风在台湾以东洋面活动时,冷涡位于台风右前方,黑潮表层海水辐合流向大陆架,冷涡中心温度上升,强度减弱,当台风转折北上,冷涡位于台风东南侧,表层海水辐散,加强底层冷水上涌,从而增强了该冷涡的强度;(3)台风不仅加深了台湾海峡的混合层深度,还使得海水的垂直热力结构改变,并使整层海温趋于一致。     

印尼热泉菌Bacillus sp. BI-3产琼胶酶的发酵条件优化

采用响应面法对1株高产琼胶酶的印度尼西亚热泉菌Bacillus sp. BI-3的发酵条件进行优化。首先以温度、pH、不同碳源、不同氮源、不同金属离子及接种量作为唯一变量进行单因素实验, 筛选出对酶活有显著影响的单因素取值范围; 参考单因素实验结果, 采用Plackett-Burman实验设计筛选出影响酶活主要因素, 再利用Box-Behnken设计及响应面分析法进行回归分析以确定最佳发酵条件。结果表明, D-甘露糖、氯化锶和氯化钙与酶活存在着显著的相关性, 通过求解回归方程得到Bacillus sp. BI-3的发酵条件系统优化的结果为: 酵母粉0.3%、D-甘露糖0.66%、蛋白胨0.6%、氯化钙7.21mmol/L、氯化锶6.00mmol/L、氯化钠添加量6‰、培养温度为55℃、接种量1%、初始pH 6.0, 优化后发酵上清液的酶活达到6.0U/mL, 比优化前提高了2.4倍。     

内孤立波作用下Spar平台动力响应特性

以三类内孤立波理论(Kd V、e Kd V和MCC)的适用性条件为依据,采用Morison和傅汝德-克雷洛夫公式分别计算Spar平台内孤立波水平力和垂向力,结合时域有限位移运动方程,建立了有限深两层流体中内孤立波与带分段式系泊索Spar平台相互作用的理论模型。以东沙群岛某海域实测内孤立波为对象,数值分析了在内孤立波作用下某经典式Spar平台的内孤立波动态载荷、运动响应及其系泊张力的变化特性。研究表明,内孤立波不仅会对Spar平台产生突发性冲击载荷,使其产生大幅度水平漂移运动,而且还会使其系泊张力显著增大。因此,在Spar平台等深海平台的设计应用中,内孤立波的影响不可忽视。     

A review of the climatological characteristics of landfalling Gulf hurricanes for wind, wave, and surge hazard estimation

The climatological characteristics of landfalling Gulf of Mexico hurricanes are presented, focusing on the basic parameters needed for accurately determining the structure and intensity of hurricanes for ocean response models. These include the maximum sustained wind, radius of maximum winds, the Holland-B parameter, the peripheral or far-field pressure, the surface roughness and coefficient of drag, and the central pressure for historical hurricanes in the Gulf.Despite evidence of a slight increase in the annual number of named storms over the past 50 years, presently there is no statistically significant trend in tropical storms, hurricanes, or major hurricanes in the Gulf of Mexico. In addition, the long-term variability of tropical cyclones in the Gulf reflects the observed variability in the Atlantic basin as a whole. Analyses of hurricane winds from multiple sources suggest the presence of a bias toward overestimating the strength of winds in the HURDAT dataset from 7% to 15%. Results presented comparing HURDAT with other sources also show an overestimation of intensity at landfall, with an estimated bias of ~10%.Finally, a review of recent studies has shown that hurricane frequencies and intensities appear to vary on a much more localized scale than previously believed. This exacerbates the sampling problem for accurate characterization of hurricane parameters for design and operational applications.     

Optimal design of two-dimensional wings in ground effect using multi-objective genetic algorithm

The shape optimization of the 2-dimensional wing in ground effect (WIG) has been performed by the integration of CFD (computational fluid dynamics) and MOGA (multi-objective genetic algorithm). Because of the trade-off between the aerodynamic forces and the height stability, it is difficult to satisfy the design requirements of efficiency and stability at the same time. In this study, the lift coefficient, the lift-drag ratio and the static height stability are chosen as the objective functions to obtain the optimal wing profiles of a WIG craft. An NACA0015 airfoil is used for the baseline model; the aerodynamic characteristics of the base model are compared with that of the optimal solutions. The profile of the airfoil is constructed by four Bezier curves with fourteen control points resulting in the eighteen coordinates, which are adopted as the design variables. The optimal solutions of the multi-objective optimization are not unique but a set of the non-dominated optima: the Pareto frontiers or a Pareto set. As the results of the multi-objective optimization, the forty Pareto optima, which include high-lift, high-efficiency, and more stable airfoils on the edge of the 3-dimensional objective space, are obtained at thirty evolutions of the generation.     

氨氮胁迫对刺参几种免疫酶活性的影响

以养殖刺参(Apostichopus japonicus)为研究对象,对不同浓度的氨氮处理及病菌感染条件下刺参体腔液免疫酶的变化进行了测定.结果表明:随着氨氮处理强度的增加,刺参体腔液中超氧化物歧化酶(SOD)、碱性磷酸酶(ALP)、谷胱甘肽过氧化物酶(GPx)及溶菌酶(LSZ)活性呈现先升高后降低的趋势,而同时感染病菌的情况下,较低质量浓度的氨氮胁迫可使SOD、GPx、ALP及LSZ活性上升,但在较高浓度氨氮处理时,酶活性的诱导则受到抑制.说明适宜浓度的氨氮处理可增强刺参的免疫力,从而减轻病菌感染对刺参造成的免疫功能损伤和提高刺参抗病力.刺参在感染病原菌假交替单胞菌(Pseudoalte-romonas sp)的条件下,3 mg/L、4 mg/L和6 mg/L浓度的氨氮处理第6天,刺参的累积发病死亡率分别为44.4％、55.6％和72.2％,高于对照组,表明较高浓度的氨氮胁迫能够显著降低刺参的免疫力,增加对病原菌的易感性.因此,在刺参养殖过程中,氨氮浓度的调控具有重要的意义.     

探讨高频检波器与低截处理的替代关系

地震检波器是实现把机械振动转换为电信号的传感器,不同检波器具有不同的相位特性和频率特性。从检波器的振动理论方程着手,分析了地震资料反射品质与检波器特性的关系。结合地质任务和技术指标要求,在相同采集因素条件下,执行特定的试验内容,考核了不同检波器类型及其性能,对资料进行了有益的处理方法尝试,获得实用而有意义的结论。在目的层较浅的探区,试验数据表明采用自然频率较低的检波器和特殊的低截处理方法同样能够实现高分辨率的地震勘探效果。     

Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.