渭北矿区地表裂陷地质灾害成因及防治

讨论了渭北矿区地表裂陷的成因、危害、防治的方法和意义。指出地震、活动性断裂、人类采矿活动、地下水活动等地质作用和煤层埋藏地质条件是矿区地表裂陷地质灾害的主要原因。矿山有关部门在减灾、防灾方面应采取的措施。     

红层软岩隧洞围岩变形破坏机制研究

红层软岩的物质组成、化学成分、物理力学性质等方面在国内外已有较系统的研究,但对软岩隧道围岩的变形破坏机理及其治理一直是工程技术人员关心问题。通过对回龙宫隧洞的地质环境分析及有限元数值计算,阐明了红层隧洞围岩的膨胀变形破坏机理,最后提出了在此类围岩中修建水工隧洞的过程中,防止围岩变形破坏的建议。     

露天矿非工作帮移动监测及滑坡规律性讨论

根 据 某露 天 煤 矿 非工 作 帮 移 动监 测 的 多 年资 料 ,总 结 出 露 天矿 非 工 作 帮的 监 测 方 法,并 初 步探 讨 了 露 天 矿非 工作 帮 移动 滑坡 的 规律 性。     

Analysis of parameters of ground vibration produced from bench blasting at a limestone quarry

The aim of this study is to predict peak particle velocity level at a limestone quarry located in Istanbul, Turkey. The ground vibration components were measured for 73 blast events during the bench blast optimization studies during a long period. In blasting operations; ANFO (blasting agent), gelatine dynamite (priming) and NONEL detonators (firing) were used as explosives at this site. Parameters of scaled distance (charge quantity per delay and the distance between the source and the station) were recorded carefully and the ground vibration components were measured by means of vibration monitors for every event. Then, the data pairs of scaled distance and particle velocity were analyzed. The equation of scaled distance extensively used in the literature was taken into consideration for the prediction of peak particle velocity. At the end of statistical evaluations, an empirical relationship with good correlation was established between peak particle velocity and scale distance for this site. The established relationship and the results of the study are presented.     

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.     

Analysis of crack movements observed in an alpine bedrock cliff

Crack widths and rock temperatures were monitored on an andestic bedrock cliff in the summit area of the Daisetsu Mountains, Hokkaido, northern Japan. Sequential data recorded the gradual widening of a crack to the point of critical crack extension, which resulted in catastrophic rock breakage. The data indicate that a combination of liquid water in?ltration into crack tip and subsequent freezing is the most signi?cant factor contributing to critical crack extension. The recorded sub‐critical crack movements involved a number of minor crack extensions and contractions, the timing of which correlates well with the magnitude of the reconstructed thermal stresses at the crack tip derived from thermal deformation of the plate‐shaped rock fragment. Larger crack extensions occurred when stress at the crack tip exceeded a threshold value, possibly re?ecting the control of rock fracture mechanics by which cracks are thought to propagate when the stress intensity factor at the crack tip exceeds the threshold values for stress corrosion cracking and the fracture toughness of the material. Copyright © 2004 John Wiley & Sons, Ltd.     

Large aftershocks triggering by Coulomb failure stress following the 2001 M_S=8.1 great Kunlun earthquake

IntroductionItisshowedbyresearchesonearthquakestresstriggeringrecentlythatsmall'static'stresschangesduetopermanentfaultdisplacementcanalterthelikelihoodof,ortrigger,earthquakesonnearbyfaults(Harris,1998).Manystudiesoftriggeringinthenear-field,particularlyofaftershocks,showthesestaticchangesaretriggeringagent(Kilb,etal,2000).ReasenbergandSimpson(1992)studiedthere-sponseofregionalseismicitytothestaticstresschangeproducedbyLomaPrietaearthquake,andtheresultsshowedthataftershockratesincreasedinre…     

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.     

Study on Ground Motion Attenuation Relation in Shanghai and Its Adjacent Region

Based on intensity data in Shanghai and its adjacent region, the intensity attenuation relation is determined. Selecting the western United States as a reference area where there are rich strong ground motion records and intensity data, and by determining ground motion attenuation relation in an area lacking in strong ground motion data, we obtain the ground motion attenuation relation in Shanghai and its adjacent region.     

化学腐蚀下砂岩三轴细观损伤机理及损伤变量分析

利用CT识别技术对化学腐蚀下的砂岩进行了三轴加载全过程的即时扫描试验，得到了在不同级荷载作用下砂岩的压密、微裂纹萌生、扩展和破裂的CT图像和CT数，分析了砂岩损伤演化的细观机理。同时，建立了一个基于化学腐蚀影响和CT数的损伤变量模型。