Variations in elastic thickness and flexure of the Maracaibo block

We estimate the lateral variations of the elastic thickness of the Maracaibo block with a 3D numerical approach by using centered finite differences. The calculation is based on solving the fourth-order partial differential equation that governs the bending of a thin plate fixed on its boundaries (zero displacement) with variable thickness (or elastic thickness for this particular case). An initial plate-load model is built and is iteratively modified to fit the general basement configuration and gravity data. The final result is an elastic thickness map that covers the Maracaibo block and the surrounding sections of the South American plate. It shows that the elastic thickness ranges from 30 km to 18 km with a mean value of 23.6 km and a mode of 26 km. The largest elastic thickness values are associated with the location of the Santa Marta Mountains and the Barinas Apure Basin, while the smallest ones with the Mérida Andes-Maracaibo Basin flexural system. The current basement configuration within the Maracaibo basin, formed as a result of its geodynamic evolution, has affected the mechanical properties of the Maracaibo block near the current Mérida Andes position. The load of the Perijá Range is compensated by a complex stress tensor, and that of the Santa Marta Mountains does not have an isostatic root as it is held by a relatively strong lithosphere.     

Crustal structure of the Alpine–Pannonian transition zone: a combined seismic and gravity study

 The crustal structure of the transition zone between the Eastern Alps and the western part of the Pannonian depression (Danube basin) is traditionally interpreted in terms of subvertical Tertiary strike-slip and normal faults separating different Alpine tectonic units. Reevaluation of approximately 4000-km-long hydrocarbon exploration reflection seismic sections and a few deep seismic profiles, together with data from approximately 300 wells, suggests a different structural model. It implies that extensional collapse of the Alpine orogene in the Middle Miocene was controlled by listric normal faults, which usually crosscut Alpine nappes at shallow levels, but at depth merge with overthrust planes separating the different Alpine units. The alternative structural model was tested along a transect across the Danube basin by gravity model calculations, and the results show that the model of low-angle extensional faulting is indeed viable. Regarding the whole lithosphere of the western Pannonian basin, gravity modelling indicates a remarkable asymmetry in the thickness minima of the attenuated crust and upper mantle. The approximately 160 km lateral offset between the two minima suggests that during the Miocene extension of the Pannonian basin detachment of the upper crust from the mantle lithosphere took place along a rheologically weak lower crust. Received: 13 July 1998 / Accepted: 18 March 1999     

Pull-down basin in the central part of Japan due to subduction-induced mantle flow

The driving force for the basin subsiding against isostatic balance in and around Lake Biwa in the Kinki district, Japan is discussed. The lake region is characterized by strong negative Bouguer anomalies, especially by a steep horizontal gradient zone of gravity anomaly running along the western margin of the lake. The large negative anomaly (>50 mgal) cannot be explained by low-density sediments beneath it. A down-warping structure extending to the Moho depth should be taken into account. This conjecture has been strongly supported by a short-period receiver function imaging, which shows a clear offset of about 8 km for the Moho discontinuity under the steep gravity gradient zone.A question arises as to what is the driving force to create such a large down-warping structure. We consider that the subduction of the shallow-dipping slab under the region (Philippine Sea Slab) may cause crustal deformation by dragging the viscous mantle downward. In order to verify this model, we simulated the induced mantle flow due to the subduction of the Philippine Sea Slab and the pressure distribution on the crust–mantle boundary. This numerical experiment showed that the induced flow makes a strong negative pressure zone under the lake region if the slab has a vertical offset along the direction of subduction. This offset of the slab is consistent with plate models deduced from hypocentral distributions and Sp phases of the deep-focus earthquakes.     

Crustal structure of the Lofoten–Vesterålen continental margin, off Norway

By compiling wide-angle seismic velocity profiles along the 400-km-long Lofoten–Vesterålen continental margin off Norway, and integrating them with an extensive seismic reflection data set and crustal-scale two-dimensional gravity modelling, we outline the crustal margin structure. The structure is illustrated by across-margin regional transects and by contour maps of depth to Moho, thickness of the crystalline crust, and thickness of the 7+ km/s lower crustal body. The data reveal a normal thickness oceanic crust seaward of anomaly 23 and an increase in thickness towards the continent–ocean boundary associated with breakup magmatism. The southern boundary of the Lofoten–Vesterålen margin, the Bivrost Fracture Zone and its landward prolongation, appears as a major across-margin magmatic and structural crustal feature that governed the evolution of the margin. In particular, a steeply dipping and relatively narrow, 10–40-km-wide, Moho-gradient zone exists within a continent–ocean transition, which decreases in width northward along the Lofoten–Vesterålen margin. To the south, the zone continues along the Vøring margin, however it is offset 70–80 km to the northwest along the Bivrost Fracture Zone/Lineament. Here, the Moho-gradient zone corresponds to a distinct, 25-km-wide, zone of rapid landward increase in crustal thickness that defines the transition between the Lofoten platform and the Vøring Basin. The continental crust on the Lofoten–Vesterålen margin reaches a thickness of 26 km and appears to have experienced only moderate extension, contrasting with the greatly extended crust in the Vøring Basin farther south. There are also distinct differences between the Lofoten and Vesterålen margin segments as revealed by changes in structural style and crustal thickness as well as in the extent of elongate potential-field anomalies. These changes may be related to transfer zones. Gravity modelling shows that the prominent belt of shelf-edge gravity anomalies results from a shallow basement structural relief, while the elongate Lofoten Islands belt requires increased lower crustal densities along the entire area of crustal thinning beneath the islands. Furthermore, gravity modelling offers a robust diagnostic tool for the existence of the lower crustal body. From modelling results and previous studies on- and off-shore mid-Norway, we postulate that the development of a core complex in the middle to lower crust in the Lofoten Islands region, which has been exhumed along detachments during large-scale extension, brought high-grade, lower crustal rocks, possibly including accreted decompressional melts, to shallower levels.     

GPS-RTK与常规仪器配合在地质勘探测量中的应用

通过东山坞矿区的测量作业,简要介绍RTK在测量中的强大功能,重点介绍了GPS-RTK在地质勘探测量中的控制测量、工程点测设以及勘探线剖面测量等应用情况。结合常规测量仪器及技术方法,既弥补了RTK在矿山测量的不足,又体现了GPS-RTK的作业优势,同时反映出常规测量仪器不可替代的作用,两者相辅相成,相得益彰。     

Slab behaviour and its surface expression: new insights from gravity modelling in the SE-Carpathians

We use lithosphere-scale gravity models to calculate gravity anomalies resulting from oceanic subduction, continental collision, slab steepening, delamination, and break-off. Local isostasy was assumed for determining vertical movements caused by mass changes related to these tectonic processes. Our results show that subduction is accompanied by basin subsidence on the upper plate caused by the heavy lithospheric root of the subducting slab. The basin evolution goes parallel with the slab evolution and shows considerable modifications when the processes at depth change (slab steepening, delamination, break-off). Characteristic gravity anomaly curves were acquired for the different tectonic scenarios. These curves together with other data (e.g. basin evolution on the upper and the lower plate) were used for the reconstruction of the tectonic evolution of the SE-Carpathians which includes Tertiary subduction and collision followed by slab steepening and delamination.     

On the use of gravity and magnetic anomalies for locating probable areas of metallic mineralization in South Sinai, Egypt

The present study deals with processing and interpreting the potential gravity and magnetic data in order to locate promising sites for metallic mineral occurrences in the basement rocks of South Sinai. Two promising sites were anticipated by combining the geophysical results and the available geological information. Each site was profiled and interpreted to the nearly approximated subsurface feature model, and the geometrical parameters of the expected subsurface structures may form mineralized bodies such as depth, thickness, width, dipping, density contrast, and magnetic susceptibility contrast could be delineated. Detailed ground Very Low Frequency (VLF) and Vertical Magnetic Gradient (VMG) methods were carried out in the site A2, eight VLF and VMG anomalies were determined, and their depths were calculated.     

我国煤炭航测技术的最新发展

中国煤炭地质总局航测遥感局作为我国煤炭航测技术的主要单位,承担着95％以上的煤炭矿区航测成图任务,并逐步发展成为我国集航空摄影、遥感地质、地图制印、地下管线探测、地理信息技术等全面发展的空间信息产业集团：伴随着计算机技术的发展,煤炭航测技术走过了从模拟测图到解析测图,最后发展到今天的全数字测图的历程。目前煤航已拥有和掌握了IMU／DGPS辅助航空摄影技术、SAR（合成孔径雷达）成图技术、LIDAR（机载激光扫描）技术等空间数据采集最新技术。     

Insight into the structure of the Upper Rhine Graben and its basement from a new compilation of Bouguer Gravity

A compilation of gravity data from the Upper Rhine Graben (URG) is presented that includes all the main data sources from its German and French parts. This data is used to show that the URG consists of, at least, two arc-shaped and asymmetric rift units that tectonically are the basic building blocks of the graben. In this sense the URG does not differ from other continental rifts, such as the African rifts. This division should replace the now classical geomorphologic division of the URG into three segments, based on their different trends. Moreover, the gravity suggests that the faults in the central and southern segments are continuous and have the same trend, appearing to respond as a single kinematic unit. Changes in the gravity field in the graben are shown to reflect not only the structure of the graben, but also the highly variable composition of the basement. In this respect, the URG is quite different from some other Tertiary continental rifts, where possible changes in the composition of the basement are mostly masked in the gravity field by the effect of the overlying low-density sediments. This characteristic is used to study the extent of some of the main basement units that underlie the graben.