海拉尔盆地贝尔凹陷的油气运聚分析

海拉尔盆地贝尔凹陷是一个以白垩系沉积为主的陆相断陷区。采用条件分析法,对贝尔凹陷的油气运聚条件及其成藏的基本模式进行了系统研究,认为,贝尔凹陷在剖面上有3套成藏组合,其中中部成藏组合最佳;在平面上可分为5个运聚系统,其中以位于凹陷西北部的3个系统为最佳。该凹陷不同构造部位的运聚条件相差较大,生烃洼陷深部位的油气运移以砂岩储集层和断裂为主要输导通道,构造高部位的油气运移以断裂为主,而两者之间的油气输导则以不整合面和断裂为主。在油气运聚和成藏模式分析的基础上,认为贝尔凹陷油气运聚的有利条件主要包括生油凹陷有充足的油源、生油区内有继承性发育的圈闭构造以及各运聚要素间存在良好的时空配置关系3个方面。     

新疆乌鲁木齐地区多年水氡观测资料的统计与分析

通过对乌鲁木齐地区1980—7．001年的水氡观测资料进行全时域扫描分析，以乌鲁木齐为中心300km范围内Ms≥5．0的地震事件为研究对象，挑选出观测资料中异常时段，用地震预报效能评价评分的方法对水氡观测资料预报地震的能力进行评价。     

生命线地震工程的研究进展

以我国、美国和日本的研究成果为依据，综述了生命线地震工程的研究概况、研究对象、震后恢复过程优化以及抗震防灾对策的新趋势。     

河南及邻区地震前中小地震活跃-平静的定量指标研究

以累计频度定量计算方法，分区讨论了河南及邻区1970年以来地震活动非线性度ZL值的时间进程曲线，系统计算了M≥5．0级地震前的ZL值，结果表明：开始出现活跃(平静)异常的时间集中在地震前1—2年，结束异常的时间在地震前一年内，集中于0—4个月。同时提出了异常的定量指标以及发震类型。     

Effect of asymmetry and irregularity of seismic waves on earthquake-induced differential settlement of buildings on natural subsoil

The effect of asymmetry and irregularity of the inputted seismic waves on the earthquake-induced differential settlement of the buildings on natural subsoil is investigated in terms of the earthquake damage phenomena, theoretical analyses, dynamic triaxial tests and shaking table tests. A conclusion can be drawn from the investigation results that, the asymmetrical and irregular character of the inputted seismic waves themselves may have a significant contribution to the differential settlement of subsoil and buildings in some cases, and this is a necessary factor to be considered in reasonable evaluation for the differential settlement and other problems relating to the soil deformation due to earthquakes.     

The importance of plant root characteristics in controlling concentrated flow erosion rates

While it has been demonstrated in numerous studies that the aboveground characteristics of the vegetation are of particular importance with respect to soil erosion control, this study argues the importance of separating the influence of vegetation on soil erosion rates into two parts: the impact of leaves and stems (aboveground biomass) and the influence of roots (belowground biomass). Although both plant parameters form inseparable constituents of the total plant organism, most studies attribute the impact of vegetation on soil erosion rates mainly to the characteristics of the aboveground biomass. This triggers the question whether the belowground biomass is of no or negligible importance with respect to soil erosion by concentrated flow. This study tried to answer this question by comparing cross‐sectional areas of concentrated flow channels (rills and ephemeral gullies) in the Belgian Loess Belt for different cereal and grass plant densities. The results of these measurements highlighted the fact that both an increase in shoot density as well as an increase in root density resulted in an exponential decrease of concentrated flow erosion rates. Since protection of the soil surface in the early plant growth stages is crucial with respect to the reduction of water erosion rates, increasing the plant root density in the topsoil could be a viable erosion control strategy. Copyright © 2003 John Wiley & Sons, Ltd.     

Mechanisms of riverbank failure along the Arno River,central Italy

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

无拓扑矢量数据快速压缩算法的研究与实现

首先论述传统矢量数据压缩算法：道格拉斯—普克法，分析将其应用于多边形边界数据压缩所造成的图形失真现象，在此基础上提出一种针对无拓扑矢量数据的快速压缩算法，并在MapInfo环境中实现该算法。     

The anisotropy of magnetic susceptibility in biotite, muscovite and chlorite single crystals

The anisotropy of magnetic susceptibility (AMS) of single crystals of biotite, muscovite and chlorite has been measured in order to provide accurate values of the magnetic anisotropy properties for these common rock-forming minerals. The low-field AMS and the high-field paramagnetic susceptibility are defined. For the high-field values, it is necessary to combine the paramagnetic deviatoric tensor obtained from the high-field torque magnetometer with the paramagnetic bulk susceptibility measured from magnetization curves of the crystals. This leads to the full paramagnetic susceptibility ellipsoid due to the anisotropic distribution of iron cations in the silicate lattice. The ellipsoid of paramagnetic susceptibility, which was obtained for the three phyllosilicates, is highly oblate in shape and the minimum susceptibility direction is subparallel to the crystallographic c-axes. The anisotropy of the susceptibility within the basal plane of the biotite has been evaluated and found to be isotropic within the accuracy of the instrumental measurements. The degree of anisotropy of biotite and chlorite is compatible with previously reported values while for muscovite the smaller than previously published values. The shape of the chlorite AMS ellipsoid for all the samples is near-perfect oblate in contrast with a wide distribution of oblate and prolate values reported in earlier studies. Reliable values are important for deriving models of the magnetic anisotropy where it reflects mineral fabrics and deformation of rocks.     

A mathematical model of concentrate solids content for the wet drum magnetic separator

Low concentrate density from wet drum magnetic separators in dense medium circuits can cause operating difficulties due to inability to obtain the required circulating medium density and, indirectly, high medium solids losses. The literature is almost silent on the processes controlling concentrate density. However, the common name for the region through which concentrate is discharged—the squeeze pan gap—implies that some extrusion process is thought to be at work. There is no model of magnetics recovery in a wet drum magnetic separator, which includes as inputs all significant machine and operating variables.A series of trials, in both factorial experiments and in single variable experiments, was done using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 mm diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in this work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery.It is proposed, based both on the experimental observations of the present work and on observations reported in the literature, that the process controlling magnetic separator concentrate density is one of drainage. Such a process should be able to be defined by an initial moisture, a drainage rate and a drainage time, the latter being defined by the volumetric flowrate and the volume within the drainage zone. The magnetics can be characterised by an experimentally derived ultimate drainage moisture. A model based on these concepts and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to be a good fit to data over concentrate solids content values from 40% solids to 80% solids and for both magnetite and ferrosilicon feeds.