Geobotanical and biogeochemical reconnaissance of the ultramafics of Central Iran

In Iran, ultramafic rocks cover substantial areas at many locations in the country. These rocks consist predominantly of peridotite which has been serpentinized to some degree. Anarak and Nain are two ultramafic areas in Central Iran comprising about 180 and 270 km², respectively, located in a coloured melange zone. There is little information available regarding the geobotany and biogeochemistry of these areas. They have a dry climate, with low rainfall and high temperatures in summer which encourages mostly annual and perennial herbaceous types of plants. In this paper, we report a reconnaissance study of these two ultramafic areas of Iran. Soil analysis of total elements indicates that typical concentrations of Ni, Cr, Co, Mn, Fe, Mg and Ca are about 1500, 300, 75, 800, 45.000 150.000 and 2000 μg g^− 1, respectively. During this study 176 plant species were collected, belonging to 29 families. The species diversity at Anarak is more than at Nain, possibly due to microclimatic differences and a greater precipitation. The number of plants endemic to ultramafic soils of these two areas is very low. The herb Cleome heratensis (Capparaceae) appears to be an indicator of ultramafics in Central Iran. Populations of this plant cover quite extensive areas during summer and autumn when there is no rainfall. Analysis of the dry matter of the leaves of all plants collected did not reveal any hyperaccumulator of nickel or any other ‘serpentine’ metals. The ultramafic endemic plant C. heratensis contained low concentrations of all metals and thus it possesses exclusion mechanisms to restrict excessive metal uptake. The Mg/Ca ratio for some plants collected is high—up to 4.9. This initial survey suggests that a more complete investigation of the ultramafic areas of Iran would be valuable.     

Hydraulic and compaction characteristics of leachate-contaminated lateritic soil

Large quantities of leachate-contaminated lateritic soil results from dump yards in the southwest coast of India. These dump yards receive large quantities of municipal solid waste which includes chemical, industrial and biomedical wastes. Large areas of land are currently being used for this purpose. An extensive laboratory testing program was carried out to determine the compaction characteristics and hydraulic conductivity of clean and contaminated lateritic soil. Batch tests were used to study the immediate effect of leachate contamination on the properties of lateritic soil. Contaminated specimens were prepared by mixing the lateritic soil with leachate in the amount of 5%, 10% and 20% by weight to vary the degree of contamination. The results indicated a small reduction in maximum dry density and an increase in hydraulic conductivity due to leachate-contamination. The change induced by chemical reaction in the microstructure of the soil was studied by scanning electron microscope before and after contamination of soil with leachate. The structure of the leachate contaminated soil sample appeared to be aggregated in scanning electron microscope analysis. The aggregated structure increases the effective pore space and thus increases the hydraulic conductivity. Fifty percent increase in hydraulic conductivity was observed for specimens prepared at standard Proctor density and mixed with 20% leachate. Compaction characteristics did not change much with the presence of leachate up to 10%. With 20% leachate the maximum dry density decreased slightly indicating excess leachate in the soil. However the changes are not significant.     

Residual strength of slip zones of large landslides in the Three Gorges area, China

Slip zones of the large landslides in the Three Gorges area are commonly composed of fine-grained soils with substantial amount of coarse-grained particles, particularly gravel-sized particles. In this study, residual strength of the soils from slip zones of these landslides were examined in relation to their index properties based on a survey of 170 landslides. It was found that laboratory-determined residual friction angle using gravel-free fraction of the disturbed soils from the slip zones was closely related to clay content, liquid limit and plasticity index. On the other hand, in-situ residual friction angle of these soils (i.e. including gravel fraction) showed very weak correlations with clay content and Atterberg limits, but was largely dependent on gravel and fines (clays + silts) contents, increasing with gravels and decreasing with fines, and displayed strong linear correlation with the ratio of gravel to fines contents. These observations indicate that among the index properties, clay content and Atterberg limits can be used to estimate residual strength of the soils finer than 2 mm, but they are not appropriate evaluate the residual strength of the soils containing considerable amount of gravel-sized particles. For the latter, particle size distribution (particularly the ratio of gravel to fines contents) appears to be a useful index. Additionally, it was found that there was no identifiable correlation between relative abundance of individual major clay minerals and residual friction angles of both gravel-free fraction of disturbed and in-situ soils, suggesting that influence of clay minerals on residual strength of these soils can not be simply evaluated based on their abundance.     

Extractable and total Fe and Mn contents of three sand dune soils in NW Nigeria

The profile distribution of total, diethylene triamine penta-acetic acid (DTPA)- and 0·1 HCl-extractable Fe and Mn were determined in 12 pedons formed on three contiguous sand dunes in the semi-arid savanna of Nigeria. The total Fe and Mn contents varied from 100 to 3750 and 40 to 11,375 μg g⁻¹, respectively. Values of 0·1 HCl-extractable Fe and Mn varied from 8·0 to 123 and 1·5 to 43·5 μg g⁻¹, respectively. The corresponding values of DTPA-extractable Fe and Mn were 4·5 to 16·0 and 1·0 to 38·8 μg g⁻¹. Total Fe and Mn correlated significantly with clay in nearly all the dunes (p≤ 0·01) but were not significantly correlated with organic matter. The 0·1 HCl-extractable Mn had a positive significant correlation with soil pH (r= 0·58*) in Illela dunes but a negative significant correlation with pH in the Sangiwa dunes (r= −0·75***). The values of extractable Fe and Mn in the sand dune soils are above the critical limits reported in other literature, thus deficiencies of these micronutrients do not pose a problem to crop production in the study area.     

Dating of post-glacial landforms in the central howgills

Little is known of Holocene landform development in Upland Britain. This paper describes a site at Middle Langdale in the Howgill Fells of Cumbria where large, but now stabilized and inactive gullies cut through periglacial material. At the base of the gullies large debris cones have buried earlier alluvial sediments on the valley floor. On these sediments and buried by the debris cones is a well-developed organic soil from which two ¹⁴C dates have been obtained in an attempt to estimate the age range of the soil. These dates range from 2580±55 years BP for the fine particulate fraction from the base of the organic horizon to 940±95 years BP for fossil rootlets from the uppermost organic layer, immediately below the overlying debris cones. The pollen evidence suggests that the valley floor site was initially dominated by alder carr and later by a Juncus marsh with birch, alder and hazel nearby. The pollen, from the surrounding upland area suggests woodland on the valley sides, dominated by oak and elm that was later replaced by a more open environment rich in heath species and in which disturbed ground species were present. The magnetic evidence indicates a stable local environment during soil formation but shows a sudden inwash of unweathered debris at the top of the buried soil. The evidence suggests that the valley floor was geomorphologically stable throughout the period of soil formation, although there was a local change in valley floor vegetation and a reduction of woodland cover on the valley sides at sometime during the period. The evidence then points to major geomorphological changes; a wave of soil erosion, gully development and debris cone deposition, perhaps following the Scandinavian introduction of sheep farming in the tenth century A.D.     

ACMEG‐TS: A constitutive model for unsaturated soils under non‐isothermal conditions

This paper introduces an unconventional constitutive model for soils, which deals with a unified thermo‐mechanical modelling for unsaturated soils. The relevant temperature and suction effects are studied in light of elasto‐plasticity. A generalized effective stress framework is adopted, which includes a number of intrinsic thermo‐hydro‐mechanical connections, to represent the stress state in the soil. Two coupled constitutive aspects are used to fully describe the non‐isothermal behaviour. The mechanical constitutive part is built on the concepts of bounding surface theory and multi‐mechanism plasticity, whereas water retention characteristics are described using elasto‐plasticity to reproduce the hysteretic response and the effect of temperature and dry density on retention properties. The theoretical formulation is supported by comparisons with experimental results on two compacted clays. Copyright © 2008 John Wiley & Sons, Ltd.     

A thermo‐mechanical model for variably saturated soils based on hypoplasticity

The paper presents a mechanical model for non‐isothermal behaviour of unsaturated soils. The model is based on an incrementally non‐linear hypoplastic model for saturated clays and can therefore tackle the non‐linear behaviour of overconsolidated soils. A hypoplastic model for non‐isothermal behaviour of saturated soils was developed and combined with the existing hypoplastic model for unsaturated soils based on the effective stress principle. Features of the soil behaviour that are included into the model, and those that are not, are clearly distinguished. The number of model parameters is kept to a minimum, and they all have a clear physical interpretation, to facilitate the model usefulness for practical applications. The step‐by‐step procedure used for the parameter calibration is described. The model is finally evaluated using a comprehensive set of experimental data for the thermo‐mechanical behaviour of an unsaturated compacted silt. Copyright © 2011 John Wiley & Sons, Ltd.     

The generation and redistribution of overland flow on a massive oxic soil in a eucalypt woodland within the semi-arid tropics of North Australia

There is a dearth of knowledge on the runoff processes of eucalypt woodland communities in the semi-arid tropics of Australia. The work was undertaken on a 100 m transect of a 0·8 degree hillslope typical of the ‘smooth plainlands’ of central-north Queensland. This paper introduces a new experimental design for measuring overland flow in such areas by way of a cascade system of unbounded runoff plots which allow the inputs and outputs between troughs to be calculated. Most storms generate overland flow. Time to overland flow ranges between 1 and 18 min where rain intensities are above 10mm hr⁻¹ and when the average detention storage of 3·6 mm is exceeded. The bare soil surfaces within the scattered grass understory control the runoff generation process through the temporal variability of field saturated hydraulic conductivity. The study demonstrated that overland flow is mainly redistributed over the freely-draining oxic soil. Some areas export more overland flow than they gain from upslope (runoff), others gain more overland flow than they export (runon). Over the study period only 2 per cent of total rain is transferred out of this 100 m transect as overland flow due to the short duration of storms, the relatively high soil permeability, and the low slope angle. The remainder adds to the large soil water store or deep drainage. The variability of runoff–runon over these ‘smooth plainlands’ highlights how results from bounded plots would be misleading in such areas.     

An elastoplastic strainhardening model for soil allowing for hydraulic bonding–debonding effects

The paper presents a strainhardening constitutive model for unsaturated soil behaviour based on energy conjugated stress variables in the framework of superposed continua. The proposed constitutive law deals with hydro‐mechanical coupling phenomena. The main purpose is to develop within a consistent framework a model that can deal with possible mechanical instabilities occurring in partially saturated materials. The loss of capillary effects during wetting processes can, in fact, play a central role in unstable processes. Therefore, it will be shown that the bonding effects due to surface tensions can be described in a mathematical framework similar to that employed for bonded geomaterials to model weathering or diagenesis effects, either mechanically or chemically induced. The results of several simulations of common laboratory tests on partially saturated soil specimens are shown. The calculated behaviour appears to be in good qualitative agreement with that observed in the laboratory. In particular it is shown that volumetric collapse phenomena due to hydraulic debonding effects can be successfully described by the model. Finally, it will be highlighted the ability of the model to naturally capture the transition to a fully saturated condition and to deal with possible mechanical instabilities in the unsaturated regime. Copyright © 2008 John Wiley & Sons, Ltd.