克服低纬度化磁极困难的有效方法

低纬度地区（尤其是磁赤道附近）磁场化极是长期以来没有很好解决的问题。这里提出的方法只时常规化极稍加改进，通过时化极因子的频点偏移，避开无界点，使化极结果改善很大，甚至在赤道上也可以化极。它既有很高的精度，又因仍是在频率域内进行，故计算方便、快速，非常适合大面积的资料计算     

陆源碎屑沉积作用对化学元素配分的制约——兼论五台地区前寒武纪碎屑沉积岩示踪源区陆壳成分的意义

为探讨粒度分选沉积作用对沉积物化学成分配分的影响,对比研究了五台群中石英岩、长石石英岩、粉砂岩和粘土岩等不同粒度沉积岩的化学成分特征,结果表明:不同粒度沉积岩的主元素及微量元素均具有较大的变化范围,SiO_2与Al_2O_3及TFe_2O_3之间呈线性负相关关系,这种负相关关系还表现在SiO_2与REE,Rb,Sr之间,这种特征可以用石英的稀释作用进行解释;铁族元素Cr,Ni,Co和REE,Rb,Sr等大离子亲石元素与Al_2O_3呈正相关关系,表明这些元素易在富铝的粘土岩中聚积。不同粒度成分沉积岩的稀土     

Composition of Kerogen in Kupferschiefer from Southwest Poland

Thirty-seven Kupferschiefer samples from southwestern Poland were analyzed by microscopy, Rock-Eval approach and instrumental neutron activation analysis to understand the geochemical and morphological characteristics of kerogen present in the samples. The analytical results indicate that there are two different types of kerogens. One type was only subjected to thermal alteration processes, and the other was further oxidized after deposition of the sediment.In the oxidized samples migrabitumen was transformed into pyrobitumen. Rock-Eval analyses show a significant decrease in HI values in the oxidized samples and an increase in OI values in relation to the samples that were not influenced by oxidation. Variations in S2 versus Corg contents indicate a change in kerogen from Type II to Type III with progressing oxidation. The presence of pyrobitumen and the depletion of hydrogen in the altered kerogen allow one to conclude that the kerogen was used as hydrogen donor for thermochemical sulfate reduction(TSR).     

颗粒分析用量筒的规格标准和计量标定

文章讨论了国内外用于密度计法颗粒分析用量筒的计量标准的规定，提出了相应的建议和标定方法。     

表生风化作用下多年冻土土壤的理论粒径分布

The paper discusses the distinctive features of grain size distribution of permafrost soils formed under conditions of continental lithogenesis and cryogenic weathering of rocks. As a functional consequence of surface erosion of mineral particles, the log-normal distribution of the density function of grain size is derived confirmed for any conditions and sediment types.     

Lake Koronia, Greece: Shift from autotrophy to heterotrophy with cultural eutrophication and progressive water-level reduction

Lake Koronia, a Ramsar site, is shallow, polymictic, hypertrophic and until recently was aerially the fourth largest lake in Greece. Although exceeding 5 m in the past, lake depth has declined progressively from 3.8 m in 1980 to < 1 m in 1997, reducing surface area and water volume by 50% and 80%, respectively. Specific conductivityincreased from 1300 μS cm⁻¹ in 1977 to >6000 μS cm⁻¹ in 1991. Increased phosphate concentrations from the late 1970's (8–45 μg L⁻¹) to the late 1990's (100–1000 μg L⁻¹) document that the previously eutrophic system with a limited littoral zone switched to hypertrophy dominated by massive cyanobacteria blooms. Oxygen saturation of the water column increased progressively from about 80% in 1983 to full saturation about 1993, after which it decreased progressively to only 20% saturation in 1997. In spite of cyanobacteria dominance, community metabolism of the lake switched from progressively increasing autotrophy to rapidly advancing heterotrophy associated with progressive water-level reduction leading to fish extirpation in the lake.     

A hybrid method for size characterization of coarse subsurface fluvial sediments

This paper introduces and evaluates a novel method for ascertaining the grain‐size distribution of subsurface sediments that involves profoundly less sampling effort than standard methods. It is based on hybrid sampling principles previously applied to the construction of synthetic surface grain‐size distributions. The method is developed from an empirical demonstration of the approximate similarity of surface and subsurface grain‐size distributions when compared over a common range of sizes. Subsurface hybrid models are found to provide good facsimiles of grain‐size distributions de?ned using standard criteria and to yield distribution percentiles with millimetre accuracy. The technique is presented as an expedient alternative to standard methods for large, perennial gravel‐bed rivers. As this is a new technique, prudent application is advised in lieu of further investigation. Copyright © 2004 John Wiley & Sons, Ltd.     

基于强度折减概念的滑坡稳定性三维分析方法(Ⅱ):加固安全系数计算

结合乌江洪家渡1#塌滑体加固设计工程,探讨了滑动面已知的条件下滑坡稳定性的三维分析方法。首先,模拟了塌滑体在天然状态下处于极限平衡状态时的滑动方向,并使用其应力成果计算了塌滑体的三维安全系数;其次,建议了基于强度折减概念的三维加固安全系数计算方法:最后,提出了加固设计的进一步优化方案。计算结果表明,塌滑体的滑动方向与局部地形等高线近于垂直。主滑方向变化较大,自后缘的NE15°方向逐步过渡到中部的NS向,最终过渡到前缘的NE30°方向,以致很难作出能表征主滑方向的地质剖面。基于应力计算成果的安全系数计算公式不能充分考虑滑坡体的抗滑潜能,也不能充分反映滑坡体的滑动方向,安全系数偏大。基于强度折减概念的三维加固安全系数计算方法具有有限元等方法的优点,较好地克服了上述局限性,可以合理地评价加固后的滑坡稳定性。     

Grain coarsening in contact metamorphic carbonates: effects of second-phase particles, fluid flow and thermal perturbations

Under contact metamorphic conditions, carbonate rocks in the direct vicinity of the Adamello pluton reflect a temperature‐induced grain coarsening. Despite this large‐scale trend, a considerable grain size scatter occurs on the outcrop‐scale indicating local influence of second‐order effects such as thermal perturbations, fluid flow and second‐phase particles. Second‐phase particles, whose sizes range from nano‐ to the micron‐scale, induce the most pronounced data scatter resulting in grain sizes too small by up to a factor of 10, compared with theoretical grain growth in a pure system. Such values are restricted to relatively impure samples consisting of up to 10 vol.% micron‐scale second‐phase particles, or to samples containing a large number of nano‐scale particles. The obtained data set suggests that the second phases induce a temperature‐controlled reduction on calcite grain growth. The mean calcite grain size can therefore be expressed in the form D = C₂ e^Q*/RT(d_p/f_p)^m*, where C₂ is a constant, Q* is an activation energy, T the temperature and m* the exponent of the ratio d_p/f_p, i.e. of the average size of the second phases divided by their volume fraction. However, more data are needed to obtain reliable values for C₂ and Q*. Besides variations in the average grain size, the presence of second‐phase particles generates crystal size distribution (CSD) shapes characterized by lognormal distributions, which differ from the Gaussian‐type distributions of the pure samples. In contrast, fluid‐enhanced grain growth does not change the shape of the CSDs, but due to enhanced transport properties, the average grain sizes increase by a factor of 2 and the variance of the distribution increases. Stable δ¹⁸O and δ¹³C isotope ratios in fluid‐affected zones only deviate slightly from the host rock values, suggesting low fluid/rock ratios. Grain growth modelling indicates that the fluid‐induced grain size variations can develop within several ka. As inferred from a combination of thermal and grain growth modelling, dykes with widths of up to 1 m have only a restricted influence on grain size deviations smaller than a factor of 1.1. To summarize, considerable grain size variations of up to one order of magnitude can locally result from second‐order effects. Such effects require special attention when comparing experimentally derived grain growth kinetics with field studies.