德国GPS在线位移监控和预警系统工作原理与工程应用

德国GPS在线位移监控和预警系统,除了可以进行GPS测量和数据处理外,还可给出观测点的实时三维位移数据、位移速度和位移加速度,绘出分析曲线,其测量精度达毫米级,并可根据预先设定的破坏概率自动报警.该系统可预测和预警自然灾害如滑坡、泥石流、地震等;在矿山开采作业中,可对矿坑、尾矿坝及采空区的地表塌陷进行监控;可用于岩土工程和土木工程建设中的高边坡、建筑物、基坑、挡土墙以及塔楼和桥梁高频率运动的监测;可广泛应用于水利工程建设,如大坝、大堤位移和沉陷的监控等.在道路建设中,可应用于隧道开挖、路堤沉陷和桥梁位移的观测.     

Late Cretaceous–Cenozoic evolution of the North German Basin—results from 3-D geodynamic modelling

The Late Cretaceous–Cenozoic evolution of the North German Basin has been investigated by 3-D thermomechanical finite element modelling. The model solves the equations of motion of an elasto-visco-plastic continuum representing the continental lithosphere. It includes the variations of stress in time and space, the thermal evolution, surface processes and variations in global sea level.The North German Basin became inverted in the Late Cretaceous–Early Cenozoic. The inversion was most intense in the southern part of the basin, i.e. in the Lower Saxony Basin, the Flechtingen High and the Harz. The lower crustal properties vary across the North German Basin. North of the Elbe Line, the lower crust is dense and has high seismic velocity compared to the lower crust south of the Elbe Line. The lower crust with high density and high velocity is assumed to be strong. Lateral variations in lithospheric strength also arise from lateral variations in Moho depth. In areas where the Moho is deep, the upper mantle is warm and the lithosphere is thereby relatively weak.Compression of the lithosphere causes shortening, thickening and surface uplift of relatively weak areas. Tectonic inversion occurs as zones of preexisting weakness are shortened and thickened in compression. Contemporaneously, the margins of the weak zone subside. Cenozoic subsidence of the northern part of the North German Basin is explained as a combination of thermal subsidence and a small amount of deformation and surface uplift during compression of the stronger crust in the north.The modelled deformation patterns and resulting sediment isopachs correlate with observations from the area. This verifies the usefulness and importance of thermomechanical models in the investigation of intraplate sedimentary basin formation.     

Salt redistribution during extension and inversion inferred from 3D backstripping

A 3D backstripping approach considering salt flow as a consequence of spatially changing overburden load distribution, isostatic rebound and sedimentary compaction for each backstripping step is used to reconstruct the subsidence history in the Northeast German Basin. The method allows to determine basin subsidence and the salt-related deformation during Late Cretaceous–Early Cenozoic inversion and during Late Triassic–Jurassic extension. In the Northeast German Basin, the deformation is thin-skinned in the basinal part, but thick-skinned at the basin margins. The salt cover is deformed due to Late Triassic–Jurassic extension and Late Cretaceous–Early Cenozoic inversion whereas the salt basement remained largely stable in the basin area. In contrast, the basin margins suffered strong deformation especially during Late Cretaceous–Early Cenozoic inversion. As a main question, we address the role of salt during the thin-skinned extension and inversion of the basin. In our modelling approach, we assume that the salt behaves like a viscous fluid on the geological time-scale, that salt and overburden are in hydrostatical near-equilibrium at all times, and that the volume of salt is constant. Because the basement of the salt is not deformed due to decoupling in the basin area, we consider the base of the salt as a reference surface, where the load pressure must be equilibrated. Our results indicate that major salt movements took place during Late Triassic to Jurassic E–W directed extension and during Late Cretaceous–Early Cenozoic NNE–SSW directed compression. Moreover, the study outcome suggests that horizontal strain propagation in the salt cover could have triggered passive salt movements which balanced the cover deformation by viscous flow. In the Late Triassic, strain transfer from the large graben systems in West Central Europe to the east could have caused the subsidence of the Rheinsberg Trough above the salt layer. In this context, the effective regional stress did not exceed the yield strength of the basement below the Rheinsberg Trough, but was high enough to provoke deformation of the viscous salt layer and its cover. During the Late Cretaceous–Early Cenozoic phase of inversion, horizontal strain propagation from the southern basin margin into the basin can explain the intensive thin-skinned compressive deformation of the salt cover in the basin. The thick-skinned compressive deformation along the southern basin margin may have propagated into the salt cover of the basin where the resulting folding again was balanced by viscous salt flow into the anticlines of folds. The huge vertical offset of the pre-Zechstein basement along the southern basin margin and the amount of shortening in the folded salt cover of the basin indicate that the tectonic forces responsible for this inversion event have been of a considerable magnitude.     

Origin of the regional stress in the North German basin: results from numerical modelling

We use a thin sheet approach to investigate the effects induced by the Alpine collision on the deformation and regional stress in northern Europe, with special emphasis on the NE German Basin. Here new seismic crustal studies indicate a flexural-type basin, which may have been induced by compressive forces transmitted from the south, due to the Alpine orogeny. Finite-element techniques are used to solve the equations for the deformation of a continuum described by a linear creep rheology and a spatial resolution of about 0.5°. The model has been constrained by stress and seismic data. We show that a relatively strong lithosphere below the northern margin of the German Basin, at the transition with the Baltic Shield, may explain the characteristic regional stress field, in particular the fan-like pattern which is observed within the region. Furthermore, the predicted strain rate pattern resembles the seismically recognizable undeformed area of the North German Basin.     

Sedimentation in a fluvially infilling, barrier-bound estuary on a wave-dominated, microtidal coast: the Ouémé River estuary, Benin, west Africa

The Ouémé River estuary is located on the seasonally humid tropical coast of Benin, west Africa. A striking feature of this microtidal estuary is the presence of a large sand barrier bounding a 120 km² circular central basin, Lake Nokoué, that is being infilled by heterogeneous fluvial deposits supplied by a relatively large catchment (50 000 km²). Borehole cores from the lower estuary show basal Pleistocene lowstand alluvial sediments overlain by Holocene transgressive–highstand lagoonal mud and by transgressive to probably early highstand tidal inlet and flood‐tidal delta sand deposited in association with non‐preserved transgressive sand barriers. The change in estuary‐mouth sedimentation from a transgressive barrier‐inlet system to a regressive highstand barrier reflects regional modifications in marine sand supply and in the cross‐barrier tidal flux associated with barrier‐inlet systems. As barrier formation west of the Ouémé River led to an increasingly rectilinear shoreline, the longshore drift cell matured, ensuring voluminous eastward transport of sand from the Volta Delta in Ghana, the major purveyor of sand, to the Ouémé embayment, 200 km east. Concomitantly, the number of tidal inlets, and the tidal flux associated with a hitherto interlinked lagoonal system on this coast, diminished. Complete sealing of Lake Nokoué has produced a large, permanently closed estuary, where tidal intrusion is assured through the interconnected coastal lagoon via an inlet located 60 km east. Since 1885, tides have entered the estuary directly through an artificial outlet cut across the sand barrier. Although precluding the seaward loss of fluvial sediments, permanent estuary‐mouth closure has especially deprived the highstand estuary of marine sand, a potentially important component in estuarine infill on wave‐dominated coasts. In spite of a significant fluvial sediment supply, estuarine infill has been moderate, because of the size of the central basin. Estuarine closure has resulted in two co‐existing highstand sediment suites, with limited admixture, the marine‐derived, estuary‐mouth barrier and upland‐derived back‐barrier sediments. This situation differs from that of mature barrier estuaries characterized by active fluvial‐marine sediment mixing and facies interfingering.     

Analysis of broadband seismic noise at the German Regional Seismic Network and search for improved alternative station sites

The German Regional Seismic Network (GRSN) comprizes now 16 digital broadband stations equipped with Wieland-Streckeisen STS-2 seismometers, 24-bit dataloggers and a seismological data center at Erlangen. It covers the whole territory of Germany with station-spacings between 80 km to 240 km. The stations are sited in very different environments ranging from near shore at the Baltic Sea coast up to distances of about 700 km from the coast, both within cities and up to about 10 km away from any major settlement, industry or traffic roads. The underground varies from outcropping hard rocks in Hercynian mountain areas, sedimentary rocks in areas of Mesozoic platform cover to up to 1.5 km unconsolidated Quarternary and Tertiary subsoil. Accordingly, seismic background noise varies in a wide range between the upper and lower bounds of the new global noise model. The noise conditions at the GRSN have been investigated systematically by means of displacement power spectral analysis within the frequency range 10^-2 5 for RUE and > 10 for BSEG have been confirmed for frequencies between about 0.6 Hz 3 Hz. Strong lateral velocity and impedance contrasts between the outcropping Triassic/Permian sedimentary rocks and the surrounding unconsolidated Quarternary/Tertiary sediments are shown to be the main cause for the strong noise reduction and signal-to-noise ratio improvement at RUE and can account for about 50% of the noise reduction at BSEG.     

Advocates in East Germany after 1949

The article deals with the development of the legal profession in the former German Democratic Republic after 1949 and in the five new Bundesländer since 3 October 1990, the day of German unification. It shows the transition from the traditional western concept of an independent bar to a profession bound by socialist ideals. The process of change before, and the development after, unification are highlighted from the viewpoints of the East German bar's perception of itself, the financial and social background and of the inequality in the provision of legal services within East Germany and in comparison to the West. The paper concludes that there are still significant differences in the provision of legal services in East and West Germany, and that the legal profession faces a formidable challenge to its self-regulating abilities.     

Watching the East: Constructions of ‘otherness’ in TV representations of East Germany

Coming from a socio-cultural geography perspective this paper sets out to question the ‘essentiality’ of East/West German differences, often said to persist in Germany despite (re)unification, by analysing the way in which they are socially constructed in German television reports and films today. Particular emphasis is placed upon the social and spatial positioning of the TV producers, of those represented, and of the audience. It is suggested that television representations such as those analysed in the paper effect a marginalization of East Germans and East Germany that can be partially resisted on the basis of contradictions ‘within’ and ‘outside’ filmic texts.     

Salinization problems in the NEGB: results from thermohaline simulations

The occurrence of salty waters close to the surface is a well-known problem in the North East German Basin. Previous numerical simulations showed that near-surface brine occurrences are due to the interaction of hydrostatic and thermally induced forces (mixed convection). The influence of hydraulic permeabilities and thermal conductivities on the observed patterns remained an open question. Based on a hydro-geochemical dataset, thermohaline simulations are carried out in order to quantify the impact of these physical parameters on brine migration. The results indicate that the salinity and temperature profiles are strongly controlled by hydraulic permeabilities and can locally be influenced by thermal conductivities.     

Application of a coupled discontinuous–continuous Galerkin finite element shallow water model to coastal ocean dynamics

A coupled discontinuous–continuous Galerkin (DG–CG) shallow water model is compared to a continuous Galerkin generalized wave-continuity equation (GWCE) based model for the coastal ocean, whereby local mass imbalance typical of GWCE-based solutions is eliminated using the coupled DG–CG approach. Two mass imbalance indicators for the GWCE-based model are presented and analyzed. The indicators motivate discussion on the suitability of using a GWCE-based model versus the locally conservative coupled DG–CG model. Both realistic and idealized test problems for tide, wind, and wave-driven circulation form the basis of the study. For the problems studied, coupled DG–CG solutions retain the robustness of well-documented solutions from GWCE-based models and also capture the dynamics driven by small-scale, highly advective processes which are problematic for GWCE-based models. Issues associated with the coupled DG–CG model are explored, including increased cost due to increased degrees of freedom, the necessary application of slope limiters, as well as the actual coupling process.