规则型隔震房屋的自振特性和地震反应分析方法

文中根据规则型隔震房屋的刚度、质量和阻尼分布的特点，改进了阻尼比的简化计算表达式。此外还归纳给出了自振周期、振型和地震反应计算公式。文中还将我们提出的隔震结构振型阻尼比公式与Kelly的相应公式进行了数值比较，两式的复杂程度虽几无差异，但文中的公式更为精确。文中提出的简化计算公式可以方便地在一般房屋结构隔震方案设计和地震反应的振型叠加分析中应用。     

Control law for variable damping device defined by a non-linear differential equation

This paper proposes a non-linear control law for a variable damping device (VDD) aimed at reducing structural seismic responses. The VDD is attached to the structure by an auxiliary spring element composing a non-linear Maxwell element. The VDD's damping coefficient is adjusted to control the reactive internal force in the non-linear Maxwell element. A large controlled force is thus produced with little external power required to adjust the VDD's damping coefficient. The proposed control law defines the rate or increment of the VDD's damping coefficient at a certain moment by a differential equation or its discretized form. The controlled force vs. deformation relation plots parallelogram-like hysteretic curves, which indicates quick action and energy dissipation. Fundamental characteristics of an SDOF model with the VDD controlled by the proposed law are examined for impulse, sin and seismic excitations. The law for the SDOF model is extended to one for an MDOF model. The control effect for a 3DOF model is examined by numerical experiments. Copyright © 1999 John Wiley & Sons, Ltd.     

An unconditionally stable time-stepping procedure with algorithmic damping: a weighted integral approach using two general weight functions

An accurate algorithm for the integration of the equations of motion arising in structural dynamics is presented. The algorithm is an unconditionally stable single-step implicit algorithm incorporating algorithmic damping. The displacement for a Single-Degree-of-Freedom system is approximated within a time step by a function which is cubic in time. The four coefficients of the cubic are chosen to satisfy the two initial conditions and two weighted integral equations. By considering general weight functions, eight additional coefficients arise. These coefficients are selected to (i) minimize the difference between exact and approximate solutions for small time steps, (ii) incorporate specified algorithmic damping for large time steps, (iii) ensure unconditional stability and (iv) minimize numerical operations in forming the amplification matrix. The accuracy of the procedure is discussed, and the solution time is compared with a widely used algorithm. Copyright © 1999 John Wiley & Sons, Ltd.     

Dynamic characteristics and seismic response of adjacent buildings linked by discrete dampers

Coupling adjacent buildings using discrete viscoelastic dampers for control of response to low and moderate seismic events is investigated in this paper. The complex modal superposition method is first used to determine dynamic characteristics, mainly modal damping ratio and modal frequency, of damper-linked linear adjacent buildings for practical use. Random seismic response of linear adjacent buildings linked by dampers is then determined by a combination of the complex modal superposition method and the pseudo-excitation method. This combined method can effectively and accurately determine random seismic response of non-classically damped systems in the frequency domain. Parametric studies are finally performed to identify optimal parameters of viscoelastic dampers for achieving the maximum modal damping ratio or the maximum response reduction of adjacent buildings. It is demonstrated that using discrete viscoelastic dampers of proper parameters to link adjacent buildings can reduce random seismic responses significantly. Copyright © 1999 John Wiley & Sons Ltd.     

Fundamental considerations for the design of non-linear viscous dampers

An Erratum has been published for this article in Earthquake Engineering and Structural Dynamics 2000; 29(7):1076. Two interrelated issues related to the design of non-linear viscous dampers are considered in this paper: structural velocities and equivalent viscous damping. As the effectiveness of non-linear viscous dampers is highly dependent on operating velocities, it is important to have reliable estimates of the true velocity in the device. This should be based on the actual relative structural velocity and not the commonly misused spectral pseudo-velocity. This is because if spectral pseudo-velocities (PSV) are used, they are based on design displacements (S_v=ω₀S_d) and are thus fundamentally different from the actual relative structural velocity. This paper examines the difference between these two velocities, and based on an extensive study of historical earthquake motions proposes empirical relations that permit the designer to transform the well-known spectral pseudo-velocity to an actual relative structural velocity for use in design. Non-linear static analysis procedures recommended in current guidelines for the design of structural systems with supplement damping devices are based on converting rate-dependent device properties into equivalent viscous damping properties based on an equivalent energy consumption approach. Owing to the non-linear velocity dependence of supplemental devices, an alternative approach for converting energy dissipation into equivalent viscous damping is advanced in this paper that is based upon power consumption considerations. The concept of a normalized damper capacity (ϵ) is then introduced and a simple design procedure which incorporates power equivalent linear damping based on actual structural velocities is presented. Copyright © 1999 John Wiley & Sons, Ltd.     

粤东滨海断裂带第四纪活动特征研究

我国东南沿海滨海断裂带是1条活动强烈的地震构造带,位于珠江口盆地北缘的粤东滨海断裂带是其重要组成部分,确定该断裂带的几何展布位置与最新活动特征对科学评价华南沿海地区地震危险性、地震构造和地球动力学具有重要科学意义.通过综合分析近年来南海东北部海域地质地貌、地震反射剖面、深部探测、地震活动等方面的研究成果,总结了粤东滨海...     

Adaptive base-isolation of civil structures using variable amplification

Semi-active dampers are used in base-isolation to reduce the seismic response of civil engineering structures. In the present study, a new semi-active damping system using variable amplification will be investigated for adaptive baseisolation. It uses a novel variable amplification device （VAD） connected in series with a passive damper. The VAD is capable of producing multiple amplification factors, each corresponding to a different amplification state. Forces from the damper are amplified to the structure according to the current amplification state, which is selected via a semi-active control algorithm specifically tailored to the system＇s tmique damping characteristics. To demonstrate the effectiveness of the VAD-damper system for adaptive base-isolation, numerical simulations are conducted for three and seven-story base-isolated buildings subject to both far and near-field ground motions. The results indicate that the system can achieve significant reductions in response compared to the base-isolated buildings with no damper. The proposed system is also found to perform well compared to a typical semi-active damper.     

改进的基础隔震结构地震作用简化计算方法

在《建筑抗震设计规范》(GB50011-2001)关于隔震结构的简化计算方法中,水平向减震系数的表达式和定义有些不符,假定的隔震结构地震作用分布规律也与实际情况略有出入。本文基于水平向减震系数的定义和实际隔震结构的地震作用分布规律提出了一种改进的隔震结构水平向减震系数、隔震结构总地震作用、隔震结构上部地震作用分布的计算方法,并提出了总水平地震作用减震系数的新概念。本文提出的改进方法具有表达准确、物理意义明确的特点。将本文提出的改进算法计算结果与时程分析计算结果比较,结果显示,改进方法的计算结果与时程分析结果接近,且分布规律一致。     

应县木塔环境振动试验

对于复杂的塔状古建筑物,建立一个合适的简化的数学模型是不易实现的。与强迫振动试验相比,环境振动试验比较简单、方便,所确定出的小振幅水平下的木塔结构动力特性具有足够的精度。本文首先结合应县木塔结构环境振动测试实例对环境振动测试方法作了简要介绍,并采用随机信号数据频域分析方法对测试数据进行了分析,确定木塔结构的自振频率。同时,依据不同测点在固有频率处响应的比及零迟时互相关函数确定木塔结构的振型。最后,本文依据自功率谱和互功率谱采用半功率点法计算各振型的阻尼比。本文分析结果表明,在两水平方向上木塔的振动特性存在些微差异,第一振型阻尼比较第二振型阻尼比大。     

Seismic retrofitting of braced frame buildings by RC rocking walls and viscous dampers

A design procedure for seismic retrofitting of concentrically and eccentrically braced frame buildings is proposed and validated in this paper. Rocking walls are added to the existing system to ensure an almost uniform distribution of the interstorey displacement in elevation. To achieve direct and efficient control over the seismic performance, the design procedure is founded on the displacement‐based approach and makes use of overdamped elastic response spectra. The top displacement capacity of the building is evaluated based on a rigid lateral deformed configuration of the structure and on the ductility capacity of the dissipative members of the braced frames. The equivalent viscous damping ratio of the braced structure with rocking walls is calculated based on semi‐empirical relationships specifically calibrated in this paper for concentrically and eccentrically braced frames. If the equivalent viscous damping ratio of the structure is lower than the required equivalent viscous damping ratio, viscous dampers are added and arranged between the rocking walls and adjacent reaction columns. The design internal forces of the rocking walls are evaluated considering the contributions of more than one mode of vibration. The proposed design procedure is applied to a large set of archetype braced frame buildings and its effectiveness verified by nonlinear dynamic analysis.