地震走时层析成像方法及在陨石坑探测中的应用

地震走时层析成像是地球物理反演中成熟的方法之一,已在许多领域得到广泛应用,并取得了良好的效果。本文介绍的地震层析成像方法包括模型参数化、射线追踪和理论走时计算、非线性方程组的线性化、线性化方程组的求解以及解的评价。观测数据使用了中国地震局地球物理勘探中心在岫岩陨石坑取得的浅层地震折射资料,反演得到两条近垂直交叉剖面的P波速度结构。结果表明,该坑为一简单坑,直接撞击形成的区域为直径约1．8km、深度约700m的坑体;坑中心深度约700m周围以及向下出现的7．0km／s以上的高波速可能是陨石撞击时所产生的高温高压使表层岩石达到熔融状态,改变了围岩的性质,致使围岩速度升高。     

Accuracy of the half-power bandwidth method with a third-order correction for estimating damping in multi-DOF systems

A third-order correction was recently suggested to improve the accuracy of the half-power bandwidth method in estimating the damping of single DOF systems.This paper analyzes the accuracy of the half-power bandwidth method with the third-order correction in damping estimation for multi-DOF linear systems.Damping ratios in a two-DOF linear system are estimated using its displacement and acceleration frequency response curves,respectively.A wide range of important parameters that characterize the shape of these response curves are taken into account.Results show that the third-order correction may greatly improve the accuracy of the half-power bandwidth method in estimating damping in a two-DOF system.In spite of this,the half-power bandwidth method may significantly overestimate the damping ratios of two-DOF systems in some cases.     

Performance spectra based method for the seismic design of structures equipped with passive supplemental damping systems

A new direct performance‐based design method utilizing design tools called performance‐spectra (P‐Spectra) for low‐rise to medium‐rise frame structures incorporating supplemental damping devices is presented. P‐Spectra are graphic tools that relate the responses of nonlinear SDOF systems with supplemental dampers to various damping parameters and dynamic system properties that structural designers can control. These tools integrate multiple response quantities that are important to the performance of a structure into a single compact graphical format to facilitate direct comparison of different potential solutions that satisfy a set of predetermined performance objectives under various levels of seismic hazard. An SDOF to MDOF transformation procedure that defines the required supplemental damping properties for the MDOF structure to achieve the response defined by the target SDOF system is also presented for hysteretic, linear viscous and viscoelastic damping devices. Using nonlinear time‐history analyses of idealized shear structures, the accuracy of the transformation procedure is verified. A seismic performance upgrade design example is presented to demonstrate the usefulness of the proposed method for achieving design performance goals using supplemental damping devices. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of soil–structure interaction on the dynamic properties and seismic response of piled structures

This paper presents a simple and stable procedure for the estimation of periods and dampings of piled shear buildings taking soil–structure interaction into account. A substructuring methodology that includes the three-dimensional character of the foundations is used. The structure is analyzed as founded on an elastic homogeneous half-space and excited by vertically incident S waves. The strategies proposed in the literature to estimate the period and damping are revised, and a modified strategy is proposed including crossed impedances and all damping terms. Ready-to-use graphs are presented for the estimation of flexible-base period and damping in terms of their fixed-base values and the system configuration. Maximum shear forces together with base displacement and rocking peak response are also provided. It is shown that cross-coupled impedances and kinematic interaction factors need to be taken into account to obtain accurate results for piled buildings.     

ERDAS在1：l万地形图调绘片纠正中的应用

本文介绍利用ERDAS的几何纠正功能对1：1万调绘片进行纠正的原理和方法。实验证明此种方法的纠正结果不仅可以保证较高精度而且与DLG数据叠加具有良好效果,可以作为底图进行数据编辑。     

速度传感反馈地震计的参数稳定性分析

从理论上定量分析机械摆和环路滤波等开环诸参数变化对速度传感反馈地震计闭环参数的影响.研究指出,在环路设计中可半自由选取的开环阻尼取值对参数稳定性有重要影响.过大或过小的开环阻尼取值均可能造成参数稳定性急剧变差,影响地震计在只标不调的状况下长期连续稳定工作.     

Salt-influenced normal fault growth and forced folding: The Stavanger Fault System,North Sea

Displacement ratio (D_r) is the ratio between salt thickness (T_v) and sub-salt normal fault displacement (D) (D_r = T_v/D), and it is typically used to predict the degree of geometric and kinematic linkage between sub- and supra-salt fault populations, and the overall structural style in salt-influenced extensional settings. However, we currently lack natural examples of how D_r and the underlying geological controls vary, and how these may control the three-dimensional geometry and evolution of salt-influenced normal fault systems. Furthermore, it is currently unknown if kinematic coherence in salt-influenced extensional settings can be maintained over relatively long length-scales (10¹–10³ m) and for relatively long timeframes, and how this may impact the growth and geometry of large-throw (>500 m), salt-influenced normal fault systems. In this paper we use a 3600 km², high-quality 3D seismic reflection dataset and borehole data from the Stavanger Fault System (SFS), Egersund Basin, eastern North Sea Basin to investigate; (i) how pre-rift salt thickness (T_v) and sub-salt fault throw (T) control the structural style and evolution of a basin-bounding, salt-influenced normal fault system; and (ii) the role salt plays in maintaining kinematic coherence in normal fault systems. We demonstrate that; (i) pre-rift salt distribution (T_v), specifically its presence in the proto-footwall (i.e., when T_v > 0), is the primary control on partitioning of faulting and (forced) folding along the fault system, and the style of linkage (i.e., hard- or soft-linkage) between sub- and supra-salt fault populations; and (ii) sub- and supra-salt fault populations represent brittle elements of a single, geometrically and kinematically coherent structure, the geometry and evolution of which is related to the ductile translation of strain on a scale (up to 8 km) and duration (c. 65 Myr) that believe is significantly greater and longer than previously documented.     

Seismic isolation by rubber–soil mixtures for developing countries

This paper proposes a promising seismic isolation method particularly suitable for developing countries, which makes use of rubber–soil mixtures. Apart from reducing the level of shaking in the horizontal direction, the distinctive advantage of the proposed method is that it can also significantly reduce the shaking level of vertical ground motion, to which an increasing attention has been paid in the earthquake engineering community. On the other hand, the use of scrap tires as the rubber material can provide an alternative way to consume the huge stockpile of scrap tires all over the world. Moreover, the low cost of this proposed seismic protection scheme can greatly benefit those developing countries where resources and technology are not adequate for earthquake mitigation with well‐developed, yet expensive, techniques. The proposed method has been demonstrated through a series of numerical simulations and a parametric study has also been carried out. Lastly, five important issues regarding the concept and feasibility have been discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

初始中主应力系数对中密粉煤灰动模量阻尼比影响的试验研究

利用土工静力-动力液压三轴-扭转多功能剪切仪,开展了在三向非均等固结状态下的饱和中密粉煤灰循环扭剪试验。着重探讨了初始中主应力系数对饱和中密粉煤灰的动模量和阻尼比特性的影响。试验结果表明：初始中主应力系数对粉煤灰动剪切模量有一定的影响,对阻尼比没有影响。根据仪器量测系统的特点,采用了大小位移计联合测量角位移的方法,不仅能够提高测试精度,而且能够获得完整的动模量和阻尼比随动剪应变幅值的变化过程。     

某土石坝心墙料和坝基料动模量阻尼特性的试验研究

土石坝震害将导致严重后果,目前国内外修筑于地震区的土石坝在抗震设计时都进行了动力分析。室内动力试验提供土石料可靠的动强度和动力参数是土石坝地震动力分析准确性的关键。水牛家心墙土石坝坝高100多米,大坝设防烈度9度,采用动三轴仪,对其坝基②层细砂砾料和心墙防渗土料进行大量的动力特性试验研究,分析两种土料的动模量阻尼特性,并简述其影响因素。分析试验结果有：使用一个试样完成三个不同的围压力?3c或固结比Kc,与《土工试验规程》推荐方法相比,大大减小了试验和分析工作量, 且有相当的规律性和准确程度;动模量阻尼比的主要影响因素是动应变幅、围压力、固结主应力比、孔隙比等。动应变水平影响动模量阻尼成倍增减,动模量随围压力?3c增减而增减,阻尼比D随?3c的升高而略有减小,动模量和阻尼比随固结比Kc增减而增减,Kc从1到2可使心墙土料的Edmax增加60％左右;土类不同,模量阻尼也不尽相同。水牛家心墙料的动模量较高,阻尼比较小,不易产生动力破坏。