Investigation of drag crisis phenomenon using CFD methods

When fluid flow passes a cylinder, the drag crisis phenomenon occurs between the sub-critical and the super-critical Reynolds numbers. The focus of the present studies was on the numerical prediction of the drag crisis based on CFD methods. In this work, block structured meshes with refined grids near the cylinder surface and in the downstream were employed. Both 2D and 3D simulations were performed using various turbulence models, including the SST k − ω model, the k − ϵ model, the SST with LCTM, the DES model, and the LES model. In the convergence studies, the effects of the grid size, the time step, the first grid size and the aspect ratio (for 3D simulations) on the solutions were examined. The errors due to spatial and time discretizations were quantified according to a V&V procedure. Validation studies were carried out for various Reynolds numbers between Re = 6.31 × 10⁴ and 7.57 × 10⁵. The averaged drag force, the RMS of lift force and the Strouhal number were compared with experimental data. The studies indicated that standard 2D and 3D RANS methods were inadequate to capture the drag crisis phenomenon. The LES method however has the potential to address the problem.     

Identifying Rocky Seabed Using GIS-Modeled Predictor Variables

Mapping the seabed along the Norwegian coast is costly and time consuming. Hence, finding a modeling method to separate rocky seabed from other substrate types will provide digital maps that may be used to develop cost-effective sampling designs to predict species and habitat distribution. Our approach was to use geophysical data that were quantitative and objectively defined, generalized additive models (GAMs), and Akaike information criterion (AIC) to develop statistical models and select among them. We found that slope, terrain curvature, wave exposure, and depth predicted rocky seabed occurrence with a high degree of certainty.     

海浪数值模式研究回顾与进展

本文简单介绍了海浪的生成、发展理论,以及海浪数值模式的分类;回顾总结了国内外在海浪数值模式研究方面取得的成果。     

Numerical simulation of groundwater flowing to horizontal seepage wells under a river

A horizontal seepage well, consisting of an interconnected vertical well, galleries, chambers and small-diameter radiating bores, is used to acquire relatively clean water that has been filtered through natural alluvial deposits in a riverbed. It has wide application, especially in arid and semi-arid areas. The lack of calculation formulae or models for horizontal seepage wells, up until now, has resulted in several false applications. Based on the analysis of groundwater flow characteristics, it has been concluded that several flow regimes coexist and hydraulic head loss exists in the horizontal seepage well. To avoid the difficulty of confirming the flux or head distribution in such a complex system, the model boundary of the whole horizontal seepage well has been moved to that of just the vertical well, and the well-aquifer system was treated as a heterogeneous medium, where the horizontal seepage well itself is a highly permeability medium. A mathematical model has been developed, based on the coupled seepage-pipe flow, by the introduction of equivalent hydraulic conductivity according to different flow regimes. Then a three-dimensional finite difference numerical model, based on the mathematical model, was developed and applied to a horizontal seepage well in China. The numerical model verified the groundwater flow characteristics of the horizontal seepage well. An erratum to this article can be found at     

一次典型高压型海雾过程中海上大气波导的数值模拟

2009年4月9—12日黄海海域发生了一次受高压系统影响的海雾过程。利用卫星观测与探空数据、WRF模式(Weather Research and Forecasting Model)对此次海雾过程及相伴的大气波导进行了观测分析与数值模拟。海雾与波导发展可分为3个阶段:(1)大气波导先于海雾存在于黄海海面;受高压下沉影响,黄海上空存在逆温层和较强的湿度梯度,表现为较强的贴海表面波导和非贴海表面波导。(2)海雾始于高压西部,并随高压系统逐渐东移减弱,向黄海北部扩展;辐射冷却虽然使雾顶附近逆温增强,但海雾的机械湍流使其顶部湿度梯度减小,雾顶附近对应弱悬空波导或波导消失。(3)高压系统影响使干空气下沉到雾区导致黄海海雾消散;雾顶附近逆温仍存在,同时湿度梯度增大,黄海上空逐渐变为非贴海表面波导。本研究结果表明:高压系统不仅极易为波导的发生提供有利条件,而且有利于海雾的生成,在海雾演变过程中主要是雾顶水汽梯度的变化导致了波导类型及强度的变化。     

Numerical algorithm for the dynamic analysis of base-isolated structures with dry friction

This paper deals with the techniques for solving ordinary differential equations with essential nonlinearity arising from the representation of frictional force by the sign function of the relative velocity. This problem is connected with dynamic behavior studies of base-isolated structures with dry friction devices.Mathematical evidence is presented concerning the inaccuracies of the solution which are connected with the representation of the frictional force by the sign function. An approximation of this sign model is made on the basis of the appropriate linearization of a small part of the frictional force function. A numerical algorithm for the dynamic analysis of base-isolated structures with dry friction is proposed. Numerical tests are carried out for establishing the exactness of the proposed techniques. The obtained results prove the accuracy of the techniques.     

多点地质统计学建模研究进展

从精细油藏描述中地质建模的意义和现状入手,介绍了多点地质统计学建模研究现状及其与传统地质建模方法的差 异。以辽河盆地西部凹陷某蒸汽驱试验区为例,分析了多点地质统计学建模中建模的基础、训练图像的建立、多点地质统计学 建模与传统地质建模相比所具有的优势等内容。指出多点地质统计学在井间预测方面具有明显优于其他传统建模方法的特 点。在文献调研基础上,结合自身工作实践,探讨了多点地质统计学建模目前存在的问题和未来的发展方向。指出未来多点 地质统计学建模的发展方向主要包括多信息综合地质成因分析基础上的训练图像获取、多点地质统计学算法进行改进和完善 和多点地质统计学建模方法应用领域的扩大等。     

2.5-D DC Resistivity Modeling Considering Flexibility and Accuracy

We highlighted the flexibility of using unstructured mesh together with the local refinement by a resistivity model with complicated topography. The effect of topography is emphasized. Based on this, we calculated a specific class of layered models and found that the accuracy is not always satisfactory by utilizing the standard approach. As an improvement, we employed the layered earth as the reference model to calculate the wavenumbers. The comparison demonstrates that the accuracy is considerably improved...     

海洋沉积地质过程模拟:性质与问题及前景

探讨了海洋沉积地质数值模拟的功能问题.地球科学研究以正演方法(以数值模拟为代表)和反演方法(以地层记录分析为代表)的结合为特征.数值模拟作为一种重要的研究工具,具有获得过程和机理分析结果、形成工作假说、指导现场观测和采样的作用.与此同时,在正反演交融中模型本身也得到了提高和完善.在海洋沉积地质领域,数值模拟在沉积物输运...