反射波法地震勘探在工程勘察中的应用

对于地下复杂的地质构造，地震反射波法比折射波法能够提供更多更详细的地下信息。多次覆盖反射波法观测系统可以增加同一反射点的重复观测次数，从而起到压制干扰，提高有效波信号的作用。其次选取合适的地震参数能有效地拓宽有效波频带范围，对地震勘探分辨率的提高起到非常重要的作用。     

Elastic waves in visco-elastic half-space generated by various vehicle loads

In this paper, the response of a visco-elastic half-space subjected to moving loads with static and dynamic components is investigated. Four types of vehicle loads are considered, including the moving point load, uniformly distributed wheel load, elastically distributed wheel load, and a train load simulated as a sequence of elastically distributed wheel loads. In each case, the influence of the moving loads traveling in the subsonic, transonic and supersonic ranges on the dynamic responses of the half-space is studied. The parametric study conducted herein enables us to grasp insight into the mechanism of wave propagation for a visco-elastic half-space under moving loads.     

Distorted Froude‐scaled flume analysis of large woody debris

This paper presents the results of a movable‐boundary, distorted, Froude‐scaled hydraulic model based on Abiaca Creek, a sand‐bedded channel in northern Mississippi. The model was used to examine the geomorphic and hydraulic impact of simplified large woody debris (LWD) elements. The theory of physical scale models is discussed and the method used to construct the LWD test channel is developed. The channel model had bed and banks moulded from 0·8 mm sand, and flow conditions were just below the threshold of motion so that any sediment transport and channel adjustment were the result of the debris element. Dimensions and positions of LWD elements were determined using a debris jam classification model. Elements were attached to a dynamometer to measure element drag forces, and channel adjustment was determined through detailed topographic surveys. The fluid drag force on the elements decreased asymptotically over time as the channel boundary eroded around the elements due to locally increased boundary shear stress. Total time for geomorphic adjustment computed for the prototype channel at the Q₂ discharge (discharge occurring once every two years on average) was as short as 45 hours. The size, depth and position of scour holes, bank erosion and bars created by flow acceleration past the elements were found to be related to element length and position within the channel cross‐section. Morphologies created by each debris element in the model channel were comparable with similar jams observed in the prototype channel. Published in 2001 John Wiley & Sons, Ltd.     

理查逊数和晴空颠簸的关系

对切变气流中重力内波的稳定性进行了数值计算，结果表明，判别晴空颠是否发生的临界Ｒｉ数随波长，层结稳定度和基本气流变强度的不同而有所变化，预报业务中用Ｒｉ〈０．２５作为预报晴空的指标易出现空报。     

一类反演公式

本文讨论的是组合数学中的级数反演公式，作者利用Ｂｅｌｌ多项式给出了一类很广泛的反演公式，并通过实例说明许多反演公式都是这一类反演公式的特例。     

The Effect of Weak Shear－induced Motion on Brownian Coagulation of Aerosol Particles

ＴｈｅＥｆｆｅｃｔｏｆＷｅａｋＳｈｅａｒ－ｉｎｄｕｃｅｄＭｏｔｉｏｎｏｎＢｒｏｗｎｉａｎＣｏａｇｕｌａｔｉｏｎｏｆＡｅｒｏｓｏｌＰａｒｔｉｃｌｅｓＷｉｎｊｉｎｇｓｏｎｓ（Ｃ．Ｓ．Ｗｉｎ）（温景嵩）（Ｄｅｐａｒｔｍｅｎｔｏｆｐｈｙｓｉｃｓ，Ｎａｎｋａｉ...     

统一上海工程地质分层编号的讨论

地层的工程地质统一划分和编号是一项标准化工作。和所有的标准化工作一样,应具有科学性、通用性和严肃性,应体现地区工程地质勘察水平。上海的工作应以已完成的上海地区第四纪地层分层研究成果为基础,直观地反映各组地层的工程地质性质的差异。应注意各地段地质结构的差别。并避免由於各地地层的差异性和地层编号上人为的多层编码所产生的混乱。     

LiBr溶液从低浓度到高浓度的分子动力学模拟

在 L i Br与水的物质量比分别为 1∶ 64、1∶ 32、1∶ 16、1∶ 8、1∶ 4和 1∶ 3的情况下 ,对 L i Br溶液从低温到高温的分子动力学模拟进行了研究。随浓度增加 ,锂离子的水合数量呈减少趋势但同时又从 L i+- Br-接触离子对的数量增加中得到补偿 ,而 L i离子的第一配位壳层的配位数量保持不变。在高浓度 Li Br溶液中 ,Br- O之间的距离有所增加 ,Br-- O的径向分布的形状更趋于非对称 ,从而很好地确定了 Br离子水合壳层 L i+- Br-接触离子对可以在更稀的溶液中产生 ,但随浓度增加而增加。L i+- Br-距离明显短于溶液中 Li离子与 Br离子的离子半径之和 ,也短于 L i Br晶体中两者离子半径之和。高浓度溶液中水分子的结构几乎被破坏 ,水分子间的氢键明显增加 ,但没有消失。对 L i+、Br-和水的扩数系数计算值与实验值进行了比较     

马斯京根法洪水演进反演计算方法的探讨

从计算理论上系统分析和认识了马斯京根法洪水演进反演计算算法产生的坏条件,通过引入样条函数辅助进行修匀处理和对于x数值小的情况采用反演正算的算法,使得马斯京根法洪水演进反演计算可以进行多段连续演算并具有好的效果,在工程水文设计计算中具有实用价值。     

A new technique to determine geoid and orthometric heights from satellite positioning and geopotential numbers

This paper takes advantage of space-technique-derived positions on the Earth’s surface and the known normal gravity field to determine the height anomaly from geopotential numbers. A new method is also presented to downward-continue the height anomaly to the geoid height. The orthometric height is determined as the difference between the geodetic (ellipsoidal) height derived by space-geodetic techniques and the geoid height. It is shown that, due to the very high correlation between the geodetic height and the computed geoid height, the error of the orthometric height determined by this method is usually much smaller than that provided by standard GPS/levelling. Also included is a practical formula to correct the Helmert orthometric height by adding two correction terms: a topographic roughness term and a correction term for lateral topographic mass–density variations.