Mechanisms linking active rock glaciers and impounded surface water formation in high‐mountain areas

Rock glaciers are slowly flowing mixtures of debris and ice occurring in mountains. They can represent a reservoir of water, and melting ice inside them can affect surface water hydrochemistry. Investigating the interactions between rock glaciers and water bodies is therefore necessary to better understand these mechanisms. With this goal, we elucidate the hydrology and structural setting of a rock glacier–marginal pond system, providing new insights into the mechanisms linking active rock glaciers and impounded surface waters. This was achieved through the integration of waterborne geophysical techniques (ground penetrating radar, electrical resistivity tomography and self‐potentials) and heat tracing. Results of these surveys showed that rock glacier advance has progressively filled the valley depression where the pond is located, creating a dam that could have modified the level of impounded water. A sub‐surface hydrological window connecting the rock glacier to the pond was also detected, where an inflow of cold and mineralised underground waters from the rock glacier was observed. Here, greater water contribution from the rock glacier occurred following intense precipitation events during the ice‐free season, with concomitant increasing electrical conductivity values. The outflowing dynamic of the pond is dominated by a sub‐surface seepage where a minor fault zone in bedrock was found, characterised by altered and highly‐fractured rocks. The applied approach is evaluated here as a suitable technique for investigating logistically‐complex hydrological settings which could be possibly transferred to wider scales of investigation. Copyright © 2017 John Wiley & Sons, Ltd.     

Water in garnet of garnetite (metarodingite) and eclogite from the Erzgebirge and the Lepontine Alps

Little is known about water in nominally anhydrous minerals of orogenic garnet peridotite and enclosed metabasic rocks. This study is focused on peridotite-hosted eclogite and garnetite (metarodingite) from the Erzgebirge (EG), Germany, and the Lepontine Alps (LA), Switzerland. Newly discovered, peridotite-hosted eclogite in the Erzgebirge occurs in the same ultra-high pressure (UHP) unit as gneiss-hosted coesite eclogite, from which it is petrologically indistinguishable. Garnet is present in all mafic and ultramafic high pressure (HP) rocks providing for an ideal proxy to compare the H₂O content of the different rock types. Garnet composition is very similar in EG and LA samples and depends on the rock type. Garnet from garnetite, compared to eclogite, contains more CaO (garnetite: 10.5–16.5 wt%; eclogite: 5–11 wt%) and is also characterized by an anomalous REE distribution. In contrast, the infrared (IR) spectra of garnet from both rock types reveal the same OH absorption bands that are also identical to those of previously studied peridotitic garnet from the same locations. Two groups of IR bands, SW I (3,650 ± 10 cm⁻¹) and SW II (3,570–3,630 cm⁻¹) are ascribed to structural hydroxyl (colloquially ‘water’). A third, broad band is present in about half of the analysed garnet domains and related to molecular water (MW) in submicroscopic fluid inclusions. The primary content of structural H₂O, preserved in garnet domains without fluid inclusions (and MW bands), varies systematically—depending on both the location and the rock type. Garnet from EG rocks contains more water compared to LA samples, and garnet from garnetite (EG: 121–241 wt.ppm H₂O; LA: 23–46 wt.ppm) hosts more water than eclogitic garnet (EG: 84 wt.ppm; LA: 4–11 wt.ppm). Higher contents of structural water (SW) are observed in domains with molecular water, in which the SW II band (being not restricted to HP conditions) is simultaneously enhanced. This implies that fluid influx during decompression not only led to fluid inclusions but also favoured the uptake of secondary SW. The results signify that garnet from all EG and LA samples was originally H₂O-undersaturated. Combining the data from eclogite, garnetite and previously studied peridotite, H₂O and CaO are positively correlated, pointing to the same degree of H₂O-undersaturation at peak metamorphism in all rock types. This ubiquitous water-deficiency cannot be reconciled with the derivation of any of these rocks from the lowermost part of the mantle wedge that was in contact with the subducting plate. This agrees with the previously inferred abyssal origin for part of the rocks from the LA (Cima di Gagnone). A similar origin has to be invoked for the Erzgebirge UHP unit. We suggest that all mafic and ultramafic rocks of this unit not only shared the same metamorphic evolution but also a common protolith origin, most probably on the ocean floor. This inference is supported by the presence of peridotite-hosted garnetite, representing metamorphosed rodingite.     

Characteristics of aeolian grain transport over a fluvio-glacial lacustrine braid delta,Lake Tekapo,New Zealand

This paper presents results from one of the few scientific studies to examine the physical characteristics of aeolian sediment transport in an alpine area, where topographically reinforced foehn winds initiate dust storm events. The major objective of this study is to improve knowledge of aeolian processes in mid-latitude alpine regions experiencing extreme wind speeds. Of particular interest is the role of surface characteristics in contributing to the unusually deep saltation layer which is seen to form over fluvio-glacial deposits in the Southern Alps of New Zealand. Sediment was collected at several heights (0ċ5, 1, 2 and 4 m) and locations over a large alpine braided river delta, and standard laboratory techniques used to examine grain size characteristics. An image processing technique was also used to evaluate grain roundness. Grains filtered from the airstream at 0ċ5 m and 1 m above such surfaces were found to display a mean grain size of approximately 300 to 435 μm, resembling grain size characteristics of saltation clouds previously observed in high latitude, cold climate locations, in contrast to desert and prairie environments. Samples collected at 2 and 4 m above the surface were found to consist of 60 to 65 per cent sand-sized material, with some grains exceeding 1–1ċ5 mm in diameter. Grain shape analysis conducted on silt- and clay-sized grains filtered from the airstream above mixed sand and gravel surfaces showed such grains to display an increase in grain roundness with height. This characteristic is thought to reflect the airstream's shape-sorting ability and has important implications with respect to the often observed increase in grain roundness in aeolian deposits with increasing distance from source areas. Namely, if more rounded grains are preferentially carried higher into the airstream and therefore into regions of higher wind speed, they should theoretically be transported further from the entrainment zone before being deposited. The high wind speeds observed, often exceeding 30 m s⁻¹, are seen to transport significantly larger sediment than reported in the literature for desert and prairie environments. In addition, the mixture of grain sizes, and especially the pebble- and cobble-sized clasts that dominate the fluvio-glacial deposits associated with the braided rivers in this mountain region, also appear to increase significantly the trajectory height of saltating sand grains. As a result of these two factors, the depth of the saltation cloud often exceeds 1 m. Observations made in this study therefore highlight the need for field and laboratory aeolian process studies to be extended to examine grain transport over coarse-grained beds during much higher wind velocities than typically reported in the literature. Such studies would provide a valuable insight into aeolian processes in high latitude/altitude environments, such as loess genesis. © 1997 by John Wiley & Sons, Ltd.     

Dating of rockfall damage in trees yields insights into meteorological triggers of process activity in the French Alps

Rockfall release is a rather unpredictable process. As a result, the occurrence of rockfall often threatens humans and (infra)structures. The assessment of potential drivers of rockfall activity therefore remains a major challenge, even if the relative influence of rainfall, snowmelt, or freeze–thaw cycles has long been identified in short-term monitoring projects. In the absence of longer-term assessments of rockfall triggers and possible changes thereof, our knowledge of rockfall dynamics remains still lacunary as a result of the persisting scarcity of exhaustive and precise rockfall databases. Over the last decades, several studies have employed growth disturbances (GDs) in tree-ring series to reconstruct rockfall activity. Paradoxically, these series were only rarely compared to meteorological records. In this study, we capitalize on the homogeneity of a centennial-old reforestation plot to develop two reconstructions – R1 including only growth suppressions, and R2 based on injuries – with limited biases related to decreasing sample size and changes in exposed diameters back in time. By doing so, our study also and quite clearly highlights the large potential that protection forests have in terms of yielding reliable, multidecadal rockfall reconstructions. From a methodological perspective, we find no synchronicity between R1 and R2, as well as an absence of meteorological controls on rockfall processes in R1. This observation pleads for a careful selection of GDs in future reconstructions. In terms of process dynamics, we demonstrate that summer intense rainfall events (>10 mm day⁻¹) are the main drivers for rockfall activity at our study site. Despite the stringency of our detection procedure, correlations between rockfall activity and meteorological variables remain comparable to those reported in previous studies, as a result of the complexity and multiplicity of triggering factors. We therefore call for a more systematic coupling of tree-ring analysis with rockfall and microclimatic monitoring in future studies. © 2020 John Wiley & Sons, Ltd.     

Climatic and structural controls on Late-glacial and Holocene rockfall occurrence in high-elevated rock walls of the Mont Blanc massif (Western Alps)

In the Mont Blanc massif (European Western Alps), rockfalls are one of the main natural hazards for alpinists and infrastructure. Rockfall activity after the Little Ice Age is well documented. An increase in frequency during the last three decades is related to permafrost degradation caused by rising air temperatures. In order to understand whether climate exerts a long-term control on rockfall occurrence, a selection of paleo-rockfall scars was dated in the Glacier du Géant basin [>3200 m above sea level (a.s.l.)] using terrestrial cosmogenic nuclides. Rockfall occurrence was compared to different climatic and glacial proxies. This study presents 55 new samples (including replicates) and 25 previously-published ages from nine sampling sites. In total, 62 dated rockfall events display ages ranging from 0.03 ± 0.02 ka to 88.40 ± 7.60 ka. Holocene ages and their uncertainties were used to perform a Kernel density function into a continuous dataset displaying rockfall probability per 100 years. Results highlight four Holocene periods of enhanced rockfall occurrence: (i) c. 7–5.7 ka, related to the Holocene Warm Periods; (ii) c. 4.5–4 ka, related to the Sub-boreal Warm Period; (iii) c. 2.3–1.6 ka, related to the Roman Warm Period; and (iv) c. 0.9–0.3 ka, related to the Medieval Warm Period and beginning of the Little Ice Age. Laser and photogrammetric three-dimensional (3D) models of the rock walls were produced to reconstruct the detached volumes from the best-preserved rockfall scars (≤0.91 ± 0.12 ka). A structural study was carried out at the scale of the Glacier du Géant basin using aerial photographs, and at the scale of four selected rock walls using the 3D models. Two main vertical and one horizontal fracture sets were identified. They correspond respectively to alpine shear zones and veins opened-up during long-term exhumation of the Mont Blanc massif. Our study confirms that climate primarily controls rockfall occurrence, and that structural settings, coincident at both the massif and the rock wall scales, control the rock-wall shapes as well as the geometry and volume of the rockfall events. © 2020 John Wiley & Sons, Ltd.     

Glaciokarst landforms and processes of the southern Dinaric Alps

Glaciokarst is a landscape which combines karst features and hydrology as well as inherited glacial features. It is a result of glaciation upon a karst geomorphological system. The relationship between glaciers and karst is rather poorly known and inadequately recognized. This research focuses on three distinct karst areas along the Adriatic coast in the southern Dinaric Alps that were affected by the Quaternary glaciations. An insight into specific glaciokarst processes and surface features was provided through the study of the areas of the Lov?en, Orjen and Vele? Mountains. A glaciokarst geomorphology is in general well preserved due to the prevailing vertically oriented chemical denudation following de‐glaciation and almost the entire absence of other surface processes. Typical glacial erosional features are combined by a variety of depressions which are the result of a karstic drainage of sub‐glacial waters. The majority of glacial deposits occur as extensive lateral‐terminal moraine complexes, which are often dissected by smaller breach‐lobe moraines on the external side of the ridge. Those moraine complexes are likely to be a product of several glacial events, which is supported by complex depositional structures. According to the type of glacial depositional features, the glaciers in the study areas were likely to have characteristics of moraine‐dammed glaciers. Due to vertical drainage ice‐marginal fluvial processes were unable to evacuate sediment. Fluvial transport between glacial and pro‐glacial systems in karst areas is inefficient. Nevertheless, some sediment from the glacier margin is washed away by the pro‐glacial streams, filling the karst depressions and forming piedmont‐type poljes. Copyright © 2015 John Wiley & Sons, Ltd.     

Transient sediment supply in a high‐altitude Alpine environment evidenced through a 10Be budget of the Etages catchment (French Western Alps)

Although beryllium‐10 (¹⁰Be) concentrations in stream sediments provide useful synoptic views of catchment‐wide erosion rates, little is known on the relative contributions of different sediment supply mechanisms to the acquisition of their initial signature in the headwaters. Here we address this issue by conducting a ¹⁰Be‐budget of detrital materials that characterize the morphogenetic domains representative of high‐altitude environments of the European Alps. We focus on the Etages catchment, located in the Ecrins‐Pelvoux massif (southeast France), and illustrate how in situ ¹⁰Be concentrations can be used for tracing the origin of the sand fraction from the bedload in the trunk stream. The landscape of the Etages catchment is characterized by a geomorphic transient state, high topographic gradients, and a large variety of modern geomorphic domains ranging from glacial environments to scarcely vegetated alluvial plains. Beryllium‐10 concentrations measured in the Etages catchment vary from ~1 × 10⁴ to 4.5 × 10⁵ atoms per gram quartz, while displaying consistent ¹⁰Be signatures within each representative morphogenetic unit. We show that the basic requirements for inferring catchment‐wide denudation from ¹⁰Be concentration measurements are not satisfied in this small, dynamic catchment. However, the distinct ¹⁰Be signature observed for the geomorphic domains can be used as a tracer. We suggest that a terrestrial cosmogenic nuclide (TCN) budget approach provides a valuable tool for the tracing of material origin in basins where the ‘let nature do the averaging’ principles may be violated. Copyright © 2013 John Wiley & Sons, Ltd.     

The influence of bedrock orientation on the landscape evolution,surface morphology and denudation (10Be) at the Niesen,Switzerland

Landscape evolution and surface morphology in mountainous settings are a function of the relative importance between sediment transport processes acting on hillslopes and in channels, modulated by climate variables. The Niesen nappe in the Swiss Penninic Prealps presents a unique setting in which opposite facing flanks host basins underlain by identical lithologies, but contrasting litho‐tectonic architectures where lithologies either dip parallel to the topographic slope or in the opposite direction (i.e. dip slope and non‐dip slope). The north‐western facing Diemtigen flank represents such a dip slope situation and is characterized by a gentle topography, low hillslope gradients, poorly dissected channels, and it hosts large landslides. In contrast, the south‐eastern facing Frutigen side can be described as non‐dip slope flank with deeply incised bedrock channels, high mean hillslope gradients and high relief topography. Results from morphometric analysis reveal that noticeable differences in morphometric parameters can be related to the contrasts in the relative importance of the internal hillslope‐channel system between both valley flanks. While the contrasting dip‐orientations of the underlying flysch bedrock has promoted hillslope and channelized processes to contrasting extents and particularly the occurrence of large landslides on the dip slope flank, the flank averaged beryllium‐10 (¹⁰Be)‐derived denudation rates are very similar and range between 0.20 and 0.26 mm yr^?1. In addition, our denudation rates offer no direct relationship to basin's slope, area, steepness or concavity index, but reveal a positive correlation to mean basin elevation that we interpret as having been controlled by climatically driven factors such as frost‐induced processes and orographic precipitation. Our findings illustrate that while the landscape properties in this part of the northern Alpine border can mainly be related to the tectonic architecture of the underlying bedrock, the denudation rates have a strong orographic control through elevation dependent mean annual temperature and precipitation. Copyright © 2013 John Wiley & Sons, Ltd.     

阿尔卑斯-喀尔巴阡上白垩统大洋红层特征与对比

在前人研究的基础上,从时代、岩性、古生物、沉积速率、沉积环境等方面对阿尔卑斯—喀尔巴阡地区的上白垩统大洋红层进行了详细对比,发现研究区内上白垩统大洋红层最早出露于Cenomanian期,最晚可延续至古近纪,且在Campanian期出露最为广泛,其岩性以灰岩、泥灰岩和含泥灰岩为主,生物化石以浮游有孔虫为主,沉积速率较低且在各地不尽相似,在CCD面上、下均可以出现,沉积环境一般是大陆边缘盆地、斜坡和大洋盆地等远洋、半远洋环境。通过比较分析,为进一步深入研究上白垩统大洋红层提供较为全面的基础资料。     

Runout analysis of a large rockfall in the Dolomites/Italian Alps using LIDAR derived particle sizes and shapes

LiDAR data were used to quantify and analyse a rockfall event which occurred in 2003 in the Western Dolomites (Italian Alps). In addition to previously existing airborne laserscanning (ALS) data, high resolution terrestrial laserscanning (TLS) data were collected. By using the original point clouds, the volume, axial ratio and runout length of single boulders as well as the surface roughness in the runout zone of the rockfall were derived. The total volume of the rockfall event of approximately 10 000 m³ was estimated by a reconstruction of the pre‐event surface at the detachment zone. The analysis of the laser scanning data of the accumulation zone revealed a power law scaling for boulder volumes larger than 8 m³. The dependence of runout length on boulder volume is complex; it is moderated by particle sphericity. In addition, we used ALS and TLS data to derive the spatial distribution of surface roughness on the talus cone. TLS allow for more accurate roughness mapping than ALS data, but for most applications the point density of ALS data seems to be sufficiently high to derive measures of roughness. Different sampling approaches for plane fitting on the scale of 5 m did not show significant effects besides the computational time. The results of our analyses provide important perspectives for rockfall modelling and process understanding with potential applications in both ‘applied’ (natural hazards) and ‘pure’ geomorphological research. Copyright © 2012 John Wiley & Sons, Ltd.