Very hot,very shallow hydrothermal dolomitization: An example from the Maritime Alps (north‐west Italy–south‐east France)

In the Maritime Alps (north‐west Italy – south‐east France), the Middle Triassic–lowermost Cretaceous platform carbonates of the Provençal Domain locally show an intense dolomitization. Dolomitized bodies, irregularly shaped and variable in size from some metres to hundreds of metres, are associated with tabular bodies of dolomite‐cemented breccias, cutting the bedding at a high angle, and networks of dolomite veins. Field and petrographic observations indicate that dolomitization was a polyphase process, in which episodes of hydrofracturing and host‐rock dissolution, related to episodic expulsion of overpressured fluids through faults and fracture systems, were associated with phases of host‐rock dolomitization and void cementation. Fluid inclusion analysis indicates that dolomitizing fluids were relatively hot (170 to 260°C). The case study represents an outstanding example of a fossil hydrothermal system, which significantly contributes to the knowledge of such dolomitization systems in continental margin settings. The unusually favourable stratigraphic framework allows precise constraint of the timing of dolomitization (earliest Cretaceous) and, consequently, direct evaluation of the burial setting of dolomitization which, for the upper part of the dolomitized succession, was very shallow or even close to the surface. The described large‐scale hydrothermal system was probably related to deep‐rooted faults, and provides indirect evidence of a significant earliest Cretaceous fault activity in this part of the Alpine Tethys European palaeomargin.     

How does shear zone nucleate? An example from the Suretta nappe (Swiss Eastern Alps)

In order to address the question of the processes involved during shear zone nucleation, we present a petro-structural analysis of millimetre-scale shear zones within the Roffna rhyolite (Suretta nappe, Eastern central Alps). Field and microscopic evidences show that ductile deformation is localized along discrete fractures that represent the initial stage of shear zone nucleation. During incipient brittle deformation, a syn-kinematic metamorphic assemblage of white mica + biotite + epidote + quartz precipitated at ca. 8.5 ± 1 kbar and 480 ± 50 °C that represent the metamorphic peak conditions of the nappe stacking in the continental accretionary wedge during Tertiary Alpine subduction. The brittle to ductile transition is characterized by the formation of two types of small quartz grains. The Qtz-IIa type is produced by sub-grain rotation. The Qtz-IIb type has a distinct CPO such that the orientation of c-axis is perpendicular to the shear fracture and basal and rhombhoedric slip systems are activated. These Qtz-IIb grains can either be formed by recrystallization of Qtz-IIa or by precipitation from a fluid phase. The shear zone widening stage is characterized by a switch to diffusion creep and grain boundary sliding deformation mechanisms. During the progressive evolution from brittle nucleation to ductile widening of the shear zone, fluid–rock interactions play a critical role, through chemical mass-transfer, metasomatic reactions and switch in deformation mechanisms.     

Unpacking ecosystem service bundles: Towards predictive mapping of synergies and trade-offs between ecosystem services

Multiple ecosystem services (ES) can respond similarly to social and ecological factors to form bundles. Identifying key social-ecological variables and understanding how they co-vary to produce these consistent sets of ES may ultimately allow the prediction and modelling of ES bundles, and thus, help us understand critical synergies and trade-offs across landscapes. Such an understanding is essential for informing better management of multi-functional landscapes and minimising costly trade-offs. However, the relative importance of different social and biophysical drivers of ES bundles in different types of social-ecological systems remains unclear. As such, a bottom-up understanding of the determinants of ES bundles is a critical research gap in ES and sustainability science.Here, we evaluate the current methods used in ES bundle science and synthesize these into four steps that capture the plurality of methods used to examine predictors of ES bundles. We then apply these four steps to a cross-study comparison (North and South French Alps) of relationships between social-ecological variables and ES bundles, as it is widely advocated that cross-study comparisons are necessary for achieving a general understanding of predictors of ES associations. We use the results of this case study to assess the strengths and limitations of current approaches for understanding distributions of ES bundles. We conclude that inconsistency of spatial scale remains the primary barrier for understanding and predicting ES bundles. We suggest a hypothesis-driven approach is required to predict relationships between ES, and we outline the research required for such an understanding to emerge.     

Aboveground biomass mapping in French Guiana by combining remote sensing,forest inventories and environmental data

Mapping forest aboveground biomass (AGB) has become an important task, particularly for the reporting of carbon stocks and changes. AGB can be mapped using synthetic aperture radar data (SAR) or passive optical data. However, these data are insensitive to high AGB levels (>150 Mg/ha, and >300 Mg/ha for P-band), which are commonly found in tropical forests. Studies have mapped the rough variations in AGB by combining optical and environmental data at regional and global scales. Nevertheless, these maps cannot represent local variations in AGB in tropical forests. In this paper, we hypothesize that the problem of misrepresenting local variations in AGB and AGB estimation with good precision occurs because of both methodological limits (signal saturation or dilution bias) and a lack of adequate calibration data in this range of AGB values. We test this hypothesis by developing a calibrated regression model to predict variations in high AGB values (mean >300 Mg/ha) in French Guiana by a methodological approach for spatial extrapolation with data from the optical geoscience laser altimeter system (GLAS), forest inventories, radar, optics, and environmental variables for spatial inter- and extrapolation. Given their higher point count, GLAS data allow a wider coverage of AGB values. We find that the metrics from GLAS footprints are correlated with field AGB estimations (R² = 0.54, RMSE = 48.3 Mg/ha) with no bias for high values. First, predictive models, including remote-sensing, environmental variables and spatial correlation functions, allow us to obtain “wall-to-wall” AGB maps over French Guiana with an RMSE for the in situ AGB estimates of ∼50 Mg/ha and R² = 0.66 at a 1-km grid size. We conclude that a calibrated regression model based on GLAS with dependent environmental data can produce good AGB predictions even for high AGB values if the calibration data fit the AGB range. We also demonstrate that small temporal and spatial mismatches between field data and GLAS footprints are not a problem for regional and global calibrated regression models because field data aim to predict large and deep tendencies in AGB variations from environmental gradients and do not aim to represent high but stochastic and temporally limited variations from forest dynamics. Thus, we advocate including a greater variety of data, even if less precise and shifted, to better represent high AGB values in global models and to improve the fitting of these models for high values.     

Changes in storminess and surges in western France during the last century

French meteorological data provide some information on wind direction since 1890. Since 1951, wind speed and direction have been digitised every three hours in many stations. The Brest tide gauge has recorded hourly sea levels since 1860, thus enabling hourly surges to be calculated and studied. This set of data has been organised into a data base and analysed in order to recognize evolution and trends. Strong winds are increasing in frequency in the western part of Brittany and decreasing in Normandy and Pays de Loire. Surges associated with these winds do present a slight decreasing trend. A more precise analysis allows to distinguish between southerly winds, which are slightly decreasing, and strong winds from other directions, which display a more or less important increase in frequency. The analysis shows trends that may be linked to the global circulation pattern, and that result in a new spatial distribution of winds on western France.     

Heavy metals distribution in mangrove sediments along the mobile coastline of French Guiana

The accumulation of nine heavy metals in fine-grained sediments from the mangrove fringed coast of French Guiana is evaluated. The dynamic features of the South American tropical coastline, from the Amazon to the Orinoco Rivers, result in mangrove sediments being alternately submitted to phases of erosion and net sedimentation a few tens of years long. This process influences the distribution of the heavy metals associated with these frequently re-mobilized deposits. Sedimentary cores and mangrove plant samples were collected, at different seasons, in various swamps characterized by different properties (content of sedimentary organic matter, distance from sea water and fresh water). The ranges of measured concentrations expressed in μmol g^− 1 were the following: Cu (0.06 to 0.61), Co (0.12 to 0.68), Pb (0.08 to 0.18), Ni (0.32 to 0.76), Cr (0.61 to 1.40), Zn (1.25 to 5.94), Mn (4.36 to 45.4) and Fe (441 to 1128). No differences were found between sediments from mangroves developing upstream and downstream of urban areas, i.e. Cayenne and Kourou. This suggests that the content of mangrove sediments in heavy metals along the coastline of French Guiana is essentially the result of the continuous alternation of accumulation and transport phases occurring upstream after departing from the Amazon watershed. The sources of this heavy metals content are thus difficult to identify. However it is well known that the alluvium produced by the natural erosion of the Amazonian soils is naturally enriched in mercury. Also, the run-off from gold mining activities is known to contribute to mercury pollution. Ranges in total Hg were between 0.15 and 2.57 nmol g^− 1, with mean values close to 0.41 nmol g^− 1, and were clearly correlated with total organic carbon except for some outstanding high values, which may be a result of rapid geochemical changes. Heavy metal concentrations showed variations with depth. The redox conditions and the decay processes affecting the organic matter control the cycling of iron and manganese, which in turn control the concentrations and associations of heavy metals. These preliminary results suggest that the variations in heavy metal content with depth or between mangrove areas result largely from diagenetic processes rather than changes in metal input resulting from local human activities.     

Crustal‐mantle lithosphere decoupling as a control on Variscan metamorphism in the Eastern Alps

Mica schists of the Variscan Austroalpine Ötztal basement (Eastern Alps) contain synkinematically grown garnet porphyroblasts showing three zones with complex inclusion trails. Staurolite, kyanite and sillimanite grew over the main schistosity that envelops the garnet porphyroblasts. The mineral‐forming reaction sequences modelled in the MnKFMASH and KFMASH systems show that garnet of zone 1 grew at approximately 1300 MPa, whereas zone 2 and zone 3 grew during substantial decompression and partial thermal relaxation. For the growth of staurolite, kyanite and sillimanite, this modelling shows that thermal relaxation continued after decompression under only slightly changing pressure conditions, until the peak temperature conditions of Variscan metamorphism were reached. The result of this modelling is a pressure‐temperature‐time (P–T–t) heating path that is consistent with a tectonic interpretation implying thickening of the lithosphere during continental collision and subsequent mantle ‐ crustal lithosphere decoupling plus extension. A direct implication of this model is that the heat budget of Variscan metamorphism was controlled by the convective replacement of the thickened lithospheric root with asthenospheric material.     

The P–T path of the ultra-high pressure Lago Di Cignana and adjoining high-pressure meta-ophiolitic units: insights into the evolution of the subducting Tethyan slab

The Lago di Cignana ultra‐high‐pressure unit (LCU), which consists of coesite–eclogite facies metabasics and metasediments, preserves the most deeply subducted oceanic rocks worldwide. New constraints on the prograde and early retrograde evolution of this ultra‐high pressure unit and adjoining units provide important insights into the evolution of the Piemontese–Ligurian palaeo‐subduction zone, active in Paleocene–Eocene times. In the LCU, a first prograde metamorphic assemblage, consisting of omphacite + Ca‐amphibole + epidote + rare biotite + ilmenite, formed during burial at estimated P < 1.7 GPa and 350 < T < 480 °C. Similar metamorphic conditions of 400 < T < 650 °C and 1.0 < P < 1.7 GPa have been estimated for the meta‐ophiolitic rocks juxtaposed to the LCU. The prograde assemblage is partially re‐equilibrated into the peak assemblage garnet + omphacite + Na‐amphibole + lawsonite + coesite + rutile, whose conditions were estimated at 590 < T < 605 °C and P > 3.2 GPa. The prograde path was characterized by a gradual decrease in the thermal gradient from ～9–10 to ～5–6 °C km^?1. This variation is interpreted as the evidence of an increase in the rate of subduction of the Piemonte–Ligurian oceanic slab in the Eocene. Accretion of the Piemontese oceanic rocks to the Alpine orogen and thermal relaxation were probably related to the arrival of more buoyant continental crust at the subduction zone. Subsequent deformation of the orogenic wedge is responsible for the present position of the LCU, sandwiched between two tectonic slices of meta‐ophiolites, named the Lower and Upper Units, which experienced peak pressures of 2.7–2.8 and <2.4 GPa respectively.     

Cave bear occupation in Schwabenreith Cave,Austria, during the early last glacial: constraints from 230Th/U‐dated speleothems

The cave bear was a prominent member of the Upper Pleistocene fauna in Eurasia. While breakthroughs were recently achieved with respect to its phylogeny using ancient DNA techniques, it is still challenging to date cave bear fossils beyond the radiocarbon age range. Without an accurate and precise chronological framework, however, key questions regarding the palaeoecology cannot be addressed, such as the extent to which large climate swings during the last glacial affected the habitat and possibly even conditioned the final extinction of this mammal. Key to constraining the age of cave bear fossils older than the lower limit of radiocarbon dating is to date interlayered speleothems using ²³⁰Th/U. Here we report new results from one such site in the Eastern European Alps (Schwabenreith Cave), which yielded the highest density of bones of cave bear (Ursus spelaeus eremus). Although dating of the flowstones overlying this fossiliferous succession was partly compromised by diagenetic alteration, the ²³⁰Th/U dates indicate that the bear hibernated in this cave after about 113 ka and before about 109 ka. This time interval coincides with the equivalent of Greenland Stadial 25, suggesting possible climate control on the cave bear's habitat and behaviour. © 2019 The Authors. Journal of Quaternary Science Published by John Wiley & Sons Ltd     

The use of iron chemical analysis of podzols to date the Late Pleistocene–Holocene deglaciation history of the Central Italian Alps

Podzols that have developed on glacial and periglacial features provide the opportunity to reconstruct glacial evolution after the Last Glacial Maximum (LGM) using different soil indices. Analysing 17 soils classified as podzol, we used the crystallinity ratio of free iron oxides (CRF) on both the A and Bs horizons, and absolute ages for the same landforms containing the soil profile, to create dating curves. Two equations were generated: age = 4566.9 × ln (CRF) + 1760 (1), and age = 3907 × ln (CRF) + 3508.2 (2). The reliability of the curves was evaluated with the Fe_o/Fe_d ratio, and with the difference of ages calculated using both equations. Equation (2) is considered more reliable because the A horizon may be influenced by new pedogenesis on the pre-existing podzol, leading to the development of a new type of soil. By dating the soils, we reconstructed the glacial history of the three main upper branches of the LGM Adda Glacier in the Central Italian Alps, specifically the Stelvio Pass area (ST), Gavia Pass area (GV), and the Val Viola valley (VV). Seven glacial advances were identified at 16.7–14.7 ka (phase I), 12.3 ka (phase II), 11 ka (phase III), 10–9.7 ka (phase IV), 9 ka (phase V), 7.5 ka (phase VI) and 5.3 ka (phase VII). The first five phases are chronologically similar to the main Late Pleistocene–Early Holocene phases recorded in the Central European Alps. The last two Holocene phases, which are both longer in duration than the Little Ice Age, are recorded in ST and GV. Interestingly, these phases generally are not recorded in the rest of the Central European Alps, where the late Holocene glaciers were smaller than their present size.