Study on the connectivity of heavy oil reservoirs by ultraviolet spectrum technique in the western part of the QHD32-6 oilfield

As a new method, the ultraviolet spectrum technique is applied to studying the connectivity of biode-gradable heavy oil reservoirs. The similarity of crude oils can be judged according to the extinction coefficient （E） because aromatic hydrocarbons and non-hydrocarbons have conjugated bonds and obvious absorption in the ultraviolet range, and different materials have different characteristics and additives. The relationship diagram is made in terms of the extinction coefficients （E） of the samples by taking E as the Y-axis and wavelength as the X-axis. The connectivity of oil reservoirs is estimated according to the curve positions and characteristic fingerprints of the sampies. The connectivity of part of the reservoirs in the western part of the QHD32-6 oilfield was studied with this method. The results showed that the connectivity of samples from wells F7 and F8 in the Nm-2 oil reservoir zone is good, that of samples from wells F17 and F20 in the Nm-1 oil reservoir zone also is good, and that of samples from wells F17, F19, and F20 is poor.     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

浅谈煤田地震勘探中影响纵向分辨率的主要因素

针对野外数据采集参数对分辨率的影响,对资料处理过程中静校正、反褶积、速度分析、Q补偿及谱白化等几个重要模块原理进行分析,指出在高速岩层中数据采集,应采用小药量激发,小道距,小排列,全三维,不组合、单点数字检波器接收。高密度多点采集,能够充分保护有效地质信息的高频成份,在更大范围内满足高分辨地震勘探的要求。资料处理过程中,在保证同相叠加和高信噪比的前提下,采用提高分辨率的模块以弥补地震波在传播过程中损失的高频成份。实践证明通过高保真、宽频带数据采集和高信噪比前提下的高分辨率数据处理,完全能够为矿井采掘提供高精度地震勘探资料。     

新鲜煤和氧化煤自燃倾向性的FTIR对比分析

利用傅立叶变换红外光谱（FTIR）分析技术,对乌达矿区低温氧化和新鲜煤样进行了红外光谱测试,通过两类煤样的特征官能团吸光度的对比分析．揭示了煤在氧化前后特征官能团的变化规律：氧化后的煤样中脂肪族和芳烃CH减少,酸酐C=O从无到有,芳烃骨架C=C基本不变,进而研究了其对煤自燃倾向性的影响。结果表明脂肪族和羟基含量越高,煤自燃倾向性越大。     

中强地震前后能量分布的自仿射特性

根据简化的地震波传播理论,“漫化”地震能量在空间的分配,减弱能量空间分布概率的极端情形及消除统计域为“空”的情形,由此构造类似于二维ｆＢｍ的地震能量空间分布概率曲面。与起伏不平的地形相似,由于基在水平方向及垂直方向的变化不是等比例的,因而这一分形曲面可能是统计自仿射的。     

Frequency modified fourier transform and its application to asteroids

Recently a method has been suggested to analyze the chaotic behaviour of a conservative dynamical system by numerical analysis of the fundamental frequencies. Frequencies and amplitudes are determined step by step. As the frequencies are not generally orthogonal, a Gramm-Schmidt orthogonalization is made and for each new frequency the old amplitudes of previously determined frequencies are corrected. For a chaotic trajectory variations of the frequencies and amplitudes determined over different time periods are expected. The change of frequencies in such a calculation is a measure of the chaoticity of the trajectory. While amplitudes are corrected, the frequencies (once determined) are constant. We suggest here simple linear corrections of frequencies for the effect of other close frequencies. The improvement of frequency determination is demonstrated on a model case. This method is applied to the first fifty numbered asteroids.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

地震信号的相位恢复及误差分析

常见的几种地震子波有:零相位子波、最小相位子波、最大相位子波和混合相位子波。以不同类型的信号为激发子波,对不同地层模型合成地震道。仅用原始合成地震道记录的振幅谱来恢复原始记录,讨论不同方法下,由于激发子波的不同,对比分析原始记录与恢复记录的差异,及其恢复效果。     

高光谱遥感数据三次光滑样条滤噪

分析了高光谱遥感数据噪声滤波的作用和现状，实现了一种基于三次光滑样条函数的高光谱遥感数据噪声滤波算法，解决了目前高光谱遥感数据噪声滤波算法自适应效果不理想的问题。通过对AVIRIS数据试验，证明此方法简单易行，计算精度高，具有良好的局部自适应拟合能力，并能有效地滤除数据中的噪声，改善数据质量。