裂缝诱导双相HTI介质模型及其弹性波传播方程

将Biot双相介质理论与Gurevich裂缝各向异性理论相结合,建立了能够同时考虑实际裂缝性储层孔隙性和各向异性的裂缝诱导双相HTI介质模型。从本构方程、动力学方程和动力学达西定律出发,推导出了裂缝诱导双相HTI介质中弹性波传播的一阶速度-应力方程,并针对方程的刚性问题,给出了利用显式二阶时间积分法数值求解该方程时所需要满足的稳定性条件。该方程能够定量地给出双相HTI介质的波场特征与裂缝参数、背景孔隙介质参数之间的关系,描述弹性波在这种介质中的传播机理。     

多孔介质渗流力学理论研究现状及发展趋势

多孔介质广泛存在于地下岩土结构、工程材料、生物体中,由于多孔介质微结构的复杂性,多孔介质渗流问题受到广泛关注。总结介绍了多孔介质渗流理论在国内外的研究现状,对多孔介质的描述、渗流问题的研究方法以及多孔介质中溶质运移、热量运移以及数值模型等方面的研究进展作了评述,并就多孔介质渗流理论在环境、农业、生态等领域的应用与发展方向提出看法。     

利用重复地震研究广东阳江地区地壳介质变化

利用射线追踪方法对广东阳江地区的重复地震进行位置归一处理, 提高走时精度以达到观测地壳介质变化的目的。 文中计算了阳江地区2002年1月至2007年9月M_L≥2.0重复地震序列经射线追踪法校正后的P波走时差。 结果显示, 在2004年阳江4.9级地震前信宜台、 湛江台、 肇庆台的记录观察到该地区短期的地壳介质速度明显升高的现象。     

波浪与多孔介质结构相互作用SPH模拟

应用经CSPM法和黎曼解修正后的光滑粒子流体动力学(SPH)方法,建立了主动吸收无反射数值波浪水槽,研究波浪作用下多孔介质结构的水动力特性。流体运动控制方程采用N-S方程,多孔渗水结构内流体的运动控制方程考虑渗流力的影响。数值计算结果给出了水槽内不同位置测点的波面历时曲线和越浪量随时间变化曲线,并同试验结果和Philip Liu的数值计算结果进行了比较。并对一个波浪周期内斜坡堤多孔介质结构内外的速度场和压力分布进行了讨论分析。计算分析表明,数值计算波面较Philip Liu的计算结果与试验结果吻合更好。说明应用SPH方法建立的二维数学模型能够较好地模拟破碎波在多孔渗水斜坡上的爬坡和越浪。     

潜航器微气泡减阻数值模拟方法研究

近年来微气泡减阻技术应用于水面舰船的相关研究取得重要进展,许多舰船已经采用了此类技术。然而该技术在潜航器上的应用整体上仍处于理论分析和试验测试阶段。以回转体潜航器简化模型为研究对象,利用多孔介质来简化喷气小孔,并结合不可压缩水体和可压缩理想气体的流体体积（VOF）方法,建立了Realizable ε-k湍流计算模式。通过拖曳试验验证了多孔介质等效喷气小孔的合理性和数值模式的准确性,结合试验和数值结果探究了微气泡减阻技术对潜航器航行阻力的影响。数值结果显示,气泡对潜航器尾流低速区的改变使尾部压力分布产生变化从而导致压差阻力增高。同时气泡可以显著降低其覆盖区域的黏性阻力。并且随着来流速度的提高,气泡覆盖范围扩大,黏性减阻率持续增加。进一步地,建立了加长改进模型,数值模拟结果表明,微气泡减阻技术不仅能大幅减小黏性阻力,还能有效减小模型总阻力。     

Influence of rainfall on the deformation and stability of a slope in overconsolidated clays: a case study

The behaviour of an instrumented unstable slope in a profile of weathered overconsolidated clay has been analysed. Available field investigation data and laboratory tests were integrated in a coupled hydromechanical model of the slope. Particular attention was given to the unsaturated soil conditions above the water table and to the influence of the rainfall record. Recorded pore-water pressures helped to identify the hydrogeological conditions of the slope. The coupled model was used to compute slope deformations and the variation of safety with time. Actual rainfall records were also integrated into the analysis. Comparison of measurements and calculations illustrate the nature of the slope instability and the complex relationships between mechanical and hydraulic factors. Electronic Publication     

VTI介质纯P波混合法正演模拟及稳定性分析

各向异性介质纯P波方程完全不受横波的干扰,在一定程度上可以减缓由于介质各向异性引起的数值不稳定,本文推导了具有垂直对称轴的横向各向同性(VTI)介质纯P波一阶速度-应力方程.由于纯P波方程存在一个分数形式的伪微分算子,无法直接采用有限差分法求解.针对该问题,本文采用伪谱法和高阶有限差分法联合求解波动方程,重点分析了混合法求解纯P波一阶速度-应力方程的稳定性问题,并给出了混合法求解纯P波方程的稳定性条件.数值模拟结果表明纯P波方程伪谱法和高阶有限差分混合法能够进行复杂介质的正演模拟,在强变速度、变密度的地球介质中仍然具有较好的稳定性.     

融合多模态特征的社会多媒体谣言检测技术研究

以微博为代表的社会媒体的蓬勃发展在加速信息交流的同时,也促使虚假谣言信息迅速在社会网络上传播,造成严重的后果.自动谣言检测问题受到了国内外学术界、产业界的广泛关注.围绕社会多媒体谣言检测这一问题,本文总结了融合多模态特征的谣言检测相关技术.首先从基本概念出发,阐述了谣言的定义和社会多媒体的特点,给出了社会多媒体谣言检测问题的定义.针对谣言检测面临的多模态特征抽取和模型构建两大难点,分别总结和归纳了各种类型的特征及其提取方法和不同的机器学习检测模型.这些特征和算法是检测谣言的基本手段,也是接下来研究的基础,可为进一步谣言检测的研究提供参考.     

Strain and culture medium optimization for production enhancement of prodiginines from marine-derived Streptomyces sp. GQQ-10

A mutant (GQQ-M6) of a Sponge-Derived streptomyces sp. GQQ-10 obtained by UV-induced mutation was used for producing prodiginines (PGs). Single factor experiments and orthogonal array design (OAD) methods were employed for medium optimization. In the single factor method, the effects of soluble starch, glucose, soybean flour, yeast extract and sodium acetate on PGs production were investigated individually. In the subsequent OAD experiments, the concentrations of these 5 key nutritional components combined with salinity were further adjusted. The mutant strain GQQ-M6 gave a 2.2-fold higher PGs production than that of the parent strain; OAD experiments offered a PGs yield of 61mg L-1, which was 10 times higher than that of the initial GQQ-10 strain under the original cultivation mode.     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.