Relative molar mass distributions of chromophoric colloidal organic matter in coastal seawater determined by Flow Field-Flow Fractionation with UV absorbance and fluorescence detection

A new method for the characterization of chromophoric colloidal organic matter in seawater has been applied to samples from the Baltic Sea, Kattegatt and Skagerrak seas. Size fractionation of the sample by Flow Field-Flow Fractionation and measurement of the fluorescent and UV absorbing properties of the individual size fractions result in a relative molar mass distribution (RMM) of the optical properties. The RMM distributions have been used to estimate number and weight average relative molar masses, and polydispersity indices. At least two sources of coloured organic matter were identified from the ratio of fluorescence to UV: the Baltic surface water and the Skagerrak deep water. The dominating processes were mixing and dilution, but processes such as photo bleaching of fluorescence are also believed to be important. The RMM distribution derived from UV detection (1150–1300 Dalton) increased with increasing salinity while that derived for fluorescence (1500–1250 Dalton) decreased with increasing salinity. The specific UV absorbance taken as a proxy of the aromaticity of the chromophoric organic material showed decreasing trend with both increasing salinity and increasing UV derived weight average relative molar mass. Increasing polydispersity of the colloidal material was also observed as a function of salinity.     

环胶州湾公路海上段汽车尾气的环境影响

对类比路段进行连续模拟试验,进行现场调查,给出汽车尾气主要污染物的排污强度,预测了汽车尾气中CO、C_nH_m和NO_x的扩散范围。     

辽河盆地大民屯凹陷流体压力特征

大民屯凹陷是辽河断陷内4个下第三系凹陷之一。在综合利用钻井、试井及地震等资料的基础上，系统研究并论述了大民屯凹陷流体压力特征。基于57口井的声波测井资料，凹陷内泥岩压力特征可区分为正常压力、异常压力或强超压等类型；根据152口井391个点的压力测试数据，凹陷内产油层段的压力梯度多接近于1；利用公式法模拟计算了47条地震剖面的流体压力、剩余压力及压力系数的分布特征，凹陷内剖面压力系统自上而下一般由正常压力、弱超压和强超压3部分组成。此外，还根据流体压力演化的基本原理及钻井、岩性与试井等实际资料，模拟恢复了大民屯凹陷的压力演化史，其可划分为超压原始积累、超压部分释放及超压再积聚3个阶段。总体上，大民屯凹陷的超压强度低于渤海湾盆地其他地区的超压强度。     

Effects of sediment properties on surface-generated ambient noise in a shallow ocean

Surface-generalized ambient noise in a shallow ocean waveguide with a sediment layer possessing a specific class of density and sound speed distributions capable of describing a realistic seabed environment is considered in this analysis. This class of non-uniform sediment layer has the density and sound speed distributions varying with respect to depth as a generalized-exponential and an inverse-square function, respectively. The study invokes a formulation developed by Kuperman and Ingenito (Kuperman, W. A., Ingenito, F., 1980. Spatial correlation of surface-generated noise in a stratified ocean. J. Acoust. Soc. Am., 67, 1988-1996.) for surface noise generation, in conjunction with the analytical solutions for the Helmholtz equation corresponding to the sediment layer, to arrive at an analytical expression convenient for numerical implementation. The intensity and spatial correlation of the noise sound field are analyzed with respect to the variation of the system parameters, including frequency, sediment layer thickness, sound speed gradient, with emphasis on the effects of sediment properties on the ambient noise field. The results have demonstrated that the intensity of the noise field is relatively sensitive to the variation of the parameters, but the spatial correlation is affected to a less extent, suggesting that the energy distribution, rather than the spatial structure, of the noise field is more susceptible to the environmental variations.     

Standard facies models to incorporate all heterogeneity levels in a reservoir model

The construction of reservoir models is frustrated by the fact that core and well cover only a fraction of the reservoir volume and it is therefore difficult to determine features like facies shape, -size, and -distribution, inter- and intra-facies boundaries and lateral trends from them. These features are, however, critical to fluid flow and they should necessarily be incorporated in the reservoir model and we therefore propose to systematically describe geometry and distribution of facies. To this end we make use of “standard facies models” that a priori contain all elements and boundaries of facies for a number of typical depositional environments.     

光照强度对海洋微藻脂肪含量及脂肪酸组成影响的研究

近年来，海洋微藻脂肪酸组成的研究及其应用越来越受到国内外科学家的重视。高度不饱和脂肪酸(PUFA)，特别是长链的n-3 PUFA，如二十碳五烯酸(EPA)和二十二碳六烯酸(DHA)对海洋动物和人类都具有营养学和医学上的价值。在海洋微藻的培养过程中，光照强度是海洋微藻生长的条件之一，光线的明与暗，光度的强与弱，不仅对微藻的生长速率、产量有影响，而且对其脂肪含量和脂肪酸的组成也有影响(Teshima et al.，1983；Thompson et al.，1990； Renaud et al., 1991)。 作者在以往研究的基础上，选择了3种有代表性的海洋微藻：(1)小球藻Chlorella sp-2(李荷芳等，1999)，此藻脂肪酸中EPA含量高、且不含DHA；(2)球等鞭金藻(Isochrysis galbana)，该藻DHA含量较高，但几乎不含EPA；(3)前沟藻(Amphidinium sp.)的EPA、DHA含量均高。将以上3种微藻作为原料，在不同的光照强度下进行培养，测定并分析藻体中的脂肪含量和脂肪酸组成的变化，从而了解光强对海洋微藻脂肪含量及其脂肪酸组成的影响。     

温度、光强和盐度对鹧鸽菜幼体生长发育的影响

从野外采集鹤鸪菜Ｃａｌｏｇｌｏｓｓａｌｅｐｒｉｅｕｒｉｉ（Ｍｏｎｔ．）Ｊ．Ａｇ．幼体，在室内控制条件下，以温、盐、光等不同条件进行模拟培养试验。所获得的数据经生物统计检验表明：鹧鸪菜幼体生长最适水温为２３℃；光照强度为４０００ｌｘ；海水盐度为１８。此结果与我们多年来在汕头港内观察鹧鸪菜的生长及其季节变化相似。     

Inverse reconstructions of ecosystem flows in investigating regime shifts: impact of the choice of objective function

Inverse analysis is increasingly used in ecosystem modelling to objectively reconstruct a large number of unknown flows or interactions from a small number of observations. This type of analysis may be useful in relating observed regime shifts in ecosystem structure to underlying processes. Inversions of ecosystem flow networks currently use a constrained least-squares solution which at the same time minimizes the squared norm (the sum of squares) of the reconstructed flows. This minimum norm (MN) inversion is thought to be a parsimonious solution to the ecosystem flow inverse problem, but it may well not reflect how ecosystems are organised. It has been proposed instead that ecosystems evolve to maximize energy/mass flows or that they maximize the information content of the network weighted by ecosystem flows (ascendancy). We used simulated inverse experiments, where inverse analyses are applied to simulations of flow networks, to explore objective functions different than the MN generally used. We could not compute inverse solutions that maximize ascendancy because the objective function is unbounded. We could calculate inversions that maximize flows; however, these generally overestimated the simulated flows, even though the simulations were designed to maximize flows. It appears that the ecosystem flow inverse problem is too under-determined (too few data relative to the number of unknowns) to allow the use of these maximizing goal functions. We introduce a new minimization that simultaneously minimizes the squared flows and the squared differences between flows. This smoothing minimization makes the inverse flows as even as possible and it helps with some technical issues with MN inversions. The simulated inverse experiments indicated that this smoothed norm (SM) is the most robust in comparative analyses of contrasting ecosystem states, such as those that can be associated with regime shifts. Like the MN inversion, the SM inversion has no ecological basis. However, it is a conservative norm that is less likely to produce false differences between the dynamics of regimes.     

A moving PIV system for ship model test in a towing tank

A moving particle image velocimetry (PIV) system was successfully developed and used in a large towing tank for ship model tests to observe velocity fields near ship models. The experimental method involved adjustable optical devices for various test conditions and a special particle-seeding device. The streamwise and cross-streamwise flow fields of a yacht model and a tanker model were measured. Ship type, bottom shape, and towing speed were found to be the causes of problems affecting optical access and image quality. Possible solutions, deeper optical ducts, dark painting color, and pre-processed analysis method, were proposed and discussed.     

A new approach for predicting the extreme response of structures

In this article a method to estimate the mean upcrossing intensity, μ(u), of a stochastic process is proposed. It is assumed that the stochastic process is a sum of a Gaussian process and a second-order correction term. The method is based on the two-dimensional Saddlepoint approximation. The accuracy of the method is tested on processes having analytical solutions for μ(u). Numerical examples are given where the stochastic process represents (i) the horizontal response of a floating offshore structure in a Gaussian sea, and (ii) the response of a structure subjected to a Gaussian wind velocity process. In addition, the estimates are compared to empirical upcrossing intensities of simulated responses. For case (ii), the obtained μ(u) estimates are compared to estimates obtained by numerical integration.