Preferential embrittlement of graphitic schists during extensional unroofing in the Alps: the effect of fluid composition on rheology in low-permeability rocks

Interlayered graphitic and non‐graphitic schists from the Tauern Window, Eastern Alps, record contrasting mechanical behaviour during extensional exhumation. Graphitic schists contain mesoscale extension fractures, pervasive microcracks in garnet, and abundant secondary fluid inclusion planes; all three types of structures are oriented perpendicular to the stretching lineation. Crack spacings in garnet from graphitic samples are tightly clustered around a mean of 180 μm. Non‐graphitic schists have fewer and more randomly oriented microcracks and fluid inclusion planes and maintained strain compatibility via crystal plasticity. The presence or absence of graphite appears to have exerted a fundamental control on rheology during unroofing. Calculations for a model graphitic rock at 500 °C and f_O2 = 10^?24 MPa show that the equilibrium metamorphic fluid evolves from X_CO2 = 0.07 to 0.38 during decompression from 700 to 400 MPa, in agreement with microcrack fluid inclusion data that show a change from X_CO2 < 0.1 to 0.45 in graphitic samples over the same pressure interval. This compositional shift results in >60% expansion of the pore fluid during decompression. H₂O‐rich fluid in non‐graphitic rocks expands <15% over the same pressure interval. The greater pore fluid expansion in low‐permeability graphitic horizons likely promoted tensile failure during unroofing. These results suggest that microcracking should be an inevitable consequence of decompression in many graphitic schists, whereas rocks that lack graphite are less likely to undergo microcracking. Microseismicity is predicted to be more common in graphitic than non‐graphitic rocks during unroofing of mountain belts.     

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.     

Understanding governance and networks: EU-US interactions and the regulation of genetically modified organisms

EU-US (European Union-United States) interactions in relation to the regulation of genetically modified organisms (GMOs) have been examined in detail in recent years. To do this scholars have tended to focus on a small number of high profile processes, such as the formal complaint of the US to the World Trade Organisation regarding the regulation of GMOs in the Europe. It is important to analyse developments of this kind but overemphasis on them has also lead to a distorted view of the case and a failure to appreciate the significance of other, less visible, types of interaction. In this paper we focus instead on trying to understand the roles played by various EU-US transnational networks—The Transatlantic Business Dialogue, The Transatlantic Economic Partnership, The Transatlantic Consumer Dialogue, The Transatlantic Environmental Dialogue and the EU-US Consultative Forum on Biotechnology. These networks have been trying to shape the regulation of GMOs in both jurisdictions since the mid 1990s. By analysing them through a ‘governance lens’ we find that we can better understand EU-US interactions and the dynamics and influences around the regulation of GMOs. This gives us valuable insights into processes of contemporary governance.     

An approach to model the mechanical behavior of transversely isotropic materials

The present work proposes an approach to adapt existing isotropic models to transversely isotropic materials. The main idea is to introduce equivalence relations between the real material and a fictitious isotropic one on which one can take all the advantages of the well‐established isotropic theory. Two applications of this approach are presented here: a failure criterion and a damage model that takes into account the load‐induced anisotropy. In both cases, theoretical predictions are in agreement with the experimental data. In the present paper, the developed approach is applied to sedimentary rock materials; nevertheless, it can be generalized to any material that exhibits transverse isotropy. Copyright © 2015 John Wiley & Sons, Ltd.     

Discrete element method modeling of inherently anisotropic rocks under uniaxial compression loading

A new numerical approach is proposed in this study to model the mechanical behaviors of inherently anisotropic rocks in which the rock matrix is represented as bonded particle model, and the intrinsic anisotropy is imposed by replacing any parallel bonds dipping within a certain angle range with smooth‐joint contacts. A series of numerical models with β = 0°, 15°, 30°, 45°, 60°, 75°, and 90° are constructed and tested (β is defined as the angle between the normal of weak layers and the maximum principal stress direction). The effect of smooth‐joint parameters on the uniaxial compression strength and Young's modulus is investigated systematically. The simulation results reveal that the normal strength of smooth‐joint mainly affects the behaviors at high anisotropy angles (β > 45°), while the shear strength plays an important role at medium anisotropy angles (30°–75°). The normal stiffness controls the mechanical behaviors at low anisotropy angles. The angle range of parallel bonds being replaced plays an important role on defining the degree of anisotropy. Step‐by‐step procedures for the calibration of micro parameters are recommended. The numerical model is calibrated to reproduce the behaviors of different anisotropic rocks. Detailed analyses are conducted to investigate the brittle failure process by looking at stress‐strain behaviors, increment of micro cracks, initiation and propagation of fractures. Most of these responses agree well with previous experimental findings and can provide new insights into the micro mechanisms related to the anisotropic deformation and failure behaviors. The numerical approach is then applied to simulate the stress‐induced borehole breakouts in anisotropic rock formations at reduced scale. The effect of rock anisotropy and stress anisotropy can be captured. Copyright © 2015 John Wiley & Sons, Ltd.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Borehole failure analysis in a sandstone under anisotropic stresses

Borehole failure under anisotropic stresses in a sandstone is analyze numerically for various borehole sizes using a nonlinear elastic–plastic constitutive model for a Cosserat continuum. Borehole failure is identified as macroscopic failure of the borehole through the development of shear bands and breakouts. The results compare well both qualitatively and quantitatively with experimental results from polyaxial tests on Red Wildmoor sandstone. They show that the hole size effect of the borehole failure strength is independent of the far‐field stress anisotropy and follows a ? power law of the hole size. A similar scale effect equation with a ? power law is proposed for the scale effect of the maximum plastic shear strain at failure. This equation can be useful for better predicting hole‐size‐dependent failure with standard codes based on classical continua. The effect of stress anisotropy on the borehole failure stress is found to be independent of the hole size. The failure stress decreases linearly to 40% as the stress anisotropy increases. However, the maximum plastic shear strain at failure is stress anisotropy independent and therefore the critical plastic shear strain for failure is only hole‐size dependent. Copyright © 2009 John Wiley & Sons, Ltd.     

Information structuring and risk-based inspection for the marine oil pipelines

The proposed work is incorporated into the research theme concerning the maintenance and inspection of sensitive facilities in production systems. It is essential to promote the methodological deployment of inspection techniques to ensure the good functioning of services provided by complex production systems as well as their different components. We use a risk-based inspection methodology offering an organized analysis with knowledge sharing for collaborative possibilities in a multidisciplinary context and it consists of the following steps: data acquisition and information collection, failure analysis (probability and consequences), risk assessment, inspection plan, mitigation and revaluation. The application of this methodology can improve the maintenance management strategies of industrial companies. The inspection department is able to forecast its potential failure, root causes and impacts on the safe operation of the considered production system, based on a reliable inventory of existing situations and review options for continuous improvement in maintenance management. In particular, we addressed the application of a Risk-Based Inspection (RBI) methodology in the French petroleum company with operations on the west coast of central and southern Africa. The incorporation of expert knowledge into risk assessment is helping to find the best preventive plan for pipeline inspection in the case study.     

A helping hand: artificial nest site provisioning increases breeding success of a tropical seabird

Common white terns Gygis alba lay a single egg balanced on rocks or branches and consequently are at risk of low nesting success. A novel technique of hollowing out coconut husks and providing artificial nest sites was developed on Cousine Island, Seychelles. Our study aimed to critically assess whether common white tern nesting success differed between artificial and natural nest sites. For natural nest sites, nesting success and the stage of nest failure were also compared between seasons, nest heights, and tree species. Finally, we compared results from our study to those of a study conducted 10 years ago on the same island. Nesting success differed significantly between artificial nests and natural nests, with the success of artificial nests nearly double that of natural nests. Hatching success was similar for artificial and natural nests (65% and 52% respectively), suggesting coconut husks do not reduce egg losses, but rather provide secure perches for young chicks. Most natural nest failures occurred during the egg phase (70%), followed by the youngest chick phase (21%). Of the eggs that hatched in natural nests, 61% fledged successfully. Tree species and season significantly influenced nesting success for natural nests and nest height varied significantly between tree species. Higher nesting success was observed during the mixed seasonal period (50%) followed by the cooler, windier and drier South-East Monsoon season (33%). The hotter and more humid North-West Monsoon period had the lowest nesting success (20%). Comparisons of nesting success at natural and artificial nest sites with the earlier study did not differ significantly, despite a smaller population of common white terns being present on the island at that stage. Our results support the use of artificial nest sites to improve nesting success for this species and serve as a model for similar species currently under threat.     

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.