Variations of the Kuroshio Axis South of Kyushu in Relation to the Large Meander of the Kuroshio

The characteristics of the Kuroshio axis south of Kyushu, which meanders almost sinusoidally, are clarified in relation to the large meander of the Kuroshio by analyzing water temperature data during 1961–95 and sea level during 1984–95. The shape of the Kuroshio axis south of Kyushu is classified into three categories of small, medium, and large amplitude of meander. The small amplitude category occupies more than a half of the large-meander (LM) period, while the medium amplitude category takes up more than a half of the non-large-meander (NLM) period. Therefore, the amplitude and, in turn, the curvature of the Kuroshio axis is smaller on average during the LM period than the NLM period. The mean Kuroshio axis during the LM period is located farther north at every longitude south of Kyushu than during the NLM period, with a slight difference west of the Tokara Islands and a large difference to the east. A northward shift of the Kuroshio axis in particular east of the Tokara Islands induces small amplitude and curvature of the meandering shape during the LM period. During the NLM period, the meandering shape and position south of Kyushu change little with Kuroshio volume transport. In the LM formation stage, the variation of the Kuroshio axis is small west of the Tokara Islands but large to the east due to a small meander of the Kuroshio. In the LM decay stage, the Kuroshio meanders greatly south of Kyushu and is located stably near the coast southeast of Kyushu. This revised version was published online in July 2006 with corrections to the Cover Date.     

Boussinesq-type modelling using an unstructured finite element technique

A model for solving the two-dimensional enhanced Boussinesq equations is presented. The model equations are discretised in space using an unstructured finite element technique. The standard Galerkin method with mixed interpolation is applied. The time discretisation is performed using an explicit three-step Taylor–Galerkin method. The model is extended to the surf and swash zone by inclusion of wave breaking and a moving boundary at the shoreline. Breaking is treated by an existing surface roller model, but a new procedure for the detection of the roller thickness is devised. The model is verified using four test cases and the results are compared with experimental data and results from an existing finite difference Boussinesq model.     

台风“灿鸿”对长江口外海域悬浮体分布的影响

台风作为事件性的强动力因素,其对河口海域沉积环境的影响目前研究较少,开展典型台风事件对长江口外海域悬浮体分布的影响研究对于深入理解长江径流挟带陆源物质向东海陆架扩散机制等具有重要意义。利用2015年09号台风"灿鸿"过境前后长江口外海域现场调查数据,分析台风前后长江口外水体结构和悬浮体粒度分布变化,结合同期环境观测数据与开源数据,阐明台风对河口外海域悬浮体分布的影响机制。结果表明:长江口外海域悬浮体中细颗粒组分(≤ 128μm)主要为无机矿物颗粒,而粗颗粒组分(>128μm)主要是生源有机颗粒。生源有机粗颗粒主要分布于中上层水体,而无机细颗粒主要分布于底层水体,使得长江口外海域悬浮体平均粒径分布呈双层结构。台风前后悬浮体粒度分布变化反映了台风对长江口外海域物理和生物过程的双重影响,其中物理过程主要影响无机细颗粒分布变化,生物过程主要影响有机粗颗粒。台风期间强烈的偏北风使得长江冲淡水在口门外海域由东北输运转为往东输运,与长江冲淡水输运方向一致的表层无机细颗粒在台风后输运方向同样往东。另外,台风作用在河口区产生的下降流将12250-4站位底部再悬浮的泥质沉积物向东搬运至12300-4站,导致12300-4站底层悬浮体浓度增加、粒度变细。台风过境还造成长江口外海域初级生产力提高,而浮游植物生长对悬浮体中有机粗颗粒的形成有促进作用,使得口门外海域上层水体中有机粗颗粒体积浓度升高。长江口外海域由于台风过境导致悬浮体中无机细颗粒和生源有机颗粒含量均增加,使得其平均粒径整体变化不大。     

Third order contribution to the wave-making resistance of a ship at finite depth of water

This paper presents a potential based boundary element method for solving a nonlinear free surface flow problem for a ship moving with a uniform speed in finite depth of water. The free surface boundary condition is linearized by the systematic method of perturbation in terms of a small parameter up to third order. The surfaces are discretized into flat quadrilateral elements and the influence coefficients are calculated by Morino's analytical formula. Dawson's upstream finite difference operator is used in order to satisfy the radiation condition. The second order solution gives better result than the first or third order solution. So the present method with the second order solution can be adopted as a powerful tool for the hydrodynamic analysis of the thin ship in finite depth of water.     

基于非充分掺混模式的流域来水组成模型

针对如何减小数值求解对流输运方程耗散误差的问题,引进断面计算浓度的概念来计算河段平均浓度,提出了非充分掺混模式的有限控制体积法离散对流输运方程的新算法,据此构建了模拟流域内的水源组成以及不同水源在流域内的时空变化情况的流域来水组成模型。通过数值试验与具体实例验证,结果表明所提出的非充分掺混模式的新算法可有效地提高流域来水模型的计算精度。     

The Creation of a National Agricultural Land Use Dataset: Combining Pycnophylactic Interpolation with Dasymetric Mapping Techniques

Agricultural Census data is summarised over spatially coarse reporting units for reasons of farm confidentiality. This is problematic for research at a local level. This article describes an approach combining dasymetric and volume preserving techniques to create a national land use dataset at 1 km² resolution. The results for an English county are compared with contemporaneous aggregated habitat data. The results show that the accurate estimates of local agricultural land use (Arable and Grass) patterns can be estimated when individual 1 km squares are combined into blocks of > 9 squares, thereby providing local estimates of agricultural land use. This in turn allows more detailed modelling of land uses related to specific livestock and cropping activities. The dataset created by this work has been subject to extensive external validation through its incorporation into a number of other national models: nitrate leaching (e.g. MAGPIE, NEAP‐N), waste, and pathogen modelling related to agricultural activity.     

Numerical simulation of a stratigraphic model

A multi-lithology diffusive stratigraphic model is considered, which simulates at large scales in space and time the infill of sedimentary basins governed by the interaction between tectonics displacements, eustatic variations, sediment supply, and sediment transport laws. The model accounts for the mass conservation of each sediment lithology resulting in a mixed parabolic, hyperbolic system of partial differential equations (PDEs) for the lithology concentrations and the sediment thickness. It also takes into account a limit on the rock alteration velocity modeled as a unilaterality constraint. To obtain a robust, fast, and accurate simulation, fully and semi-implicit finite volume discre tization schemes are derived for which the existence of stable solutions is proved. Then, the set of nonlinear equations is solved using a Newton algorithm adapted to the unilaterality constraint, and preconditioning strategies are defined for the solution of the linear system at each Newton iteration. They are based on an algebraic approximate decoupling of the sediment thickness and the concentration variables as well as on a proper preconditioning of each variable. These algorithms are studied and compared in terms of robustness, scalability, and efficiency on two real basin test cases.     

Application of FLATModel, a 2D finite volume code, to debris flows in the northeastern part of the Iberian Peninsula

FLATModel is a two-dimensional shallow-water approximation code with corrections and modifications that create a simulation tool adapted to debris-flows behaviour. FLATModel uses the finite volume method with the numerical implementation of the Godunov scheme and includes correction terms regarding the effect of flow over high slopes and curvature. Additionally, the stop-and-go phenomenon, the basal entrainment and a correction regarding the front inclination of the final deposit are incorporated into FLATModel. In addition, different flow resistance laws were integrated in the numerical code including Bingham, Herschel–Bulkley and Voellmy fluid model. Firstly, our numerical model was validated using analytical solutions of a dam-break scenario and published data on a laboratory experiment. Secondly, three real events, which occurred in the northeastern part of the Iberian Peninsula, were back-calculated. Although field observations of the three events are not very detailed, the back-analyses revealed interesting patterns on the flow dynamics, and the numerical results generally showed good agreement with field data. Comparing the different flow resistance laws, the Voellmy fluid model presents the best behaviour regarding both the flow behaviour and the deposit characteristics. Preliminary simulation runs incorporating the effect of basal entrainment offered satisfactory results, although the final volume is rather sensitive on the selected friction angle of channel-bed material. The outcomes regarding the correction of the calculated front inclination of the final deposit showed that this implementation strongly improves the simulation results and better represents steep fronts of final deposits.     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!