Experimental Investigation into the performance of the Axial-Flow-Type Waterjet according to the Variation of Impeller Tip Clearance

The tip clearance inside the duct from the tip of the impeller is very important to the performance of waterjet systems, which fact has been proven in the pump field. The tip clearance is especially important on the model scale because it is very difficult in manufacture to keep the tip clearance constant and minimally small along the inside of the duct. In the present study, a flush-type waterjet propulsion unit (duct, impeller, stator, and nozzle) was designed for an amphibious tracked vehicle. Two impellers of different inner diameter were designed and manufactured in order to investigate the gap effect. Resistance and self-propulsion tests with a 1/5-scale model were conducted in PNU towing tank. The flow rate at the nozzle exit, the static pressure at the various sections along the duct and also the nozzle, the revolution of the impeller, and the torque, thrust, and towing forces at various advanced speeds were measured. Based on these measurements, the performance was analyzed according to the ITTC 96 standard analysis method. Based on this analysis method, the full-scale effective and delivered power of the tracked vehicle was estimated according to the variation of tip clearance.     

陀螺经纬仪的读数方法比较研究

介绍了陀螺定向测量中三种不同的数据采集方法，分析了各种方法的优缺点。作者认为传感器采集数据自动化程度高，精度高，特别是运用位置敏感探测器（PSD）采样数据量大，具有一定的抗干扰能力，但在运用传感器采样时必须注意克服非线性误差。     

Boussinesq-type modelling using an unstructured finite element technique

A model for solving the two-dimensional enhanced Boussinesq equations is presented. The model equations are discretised in space using an unstructured finite element technique. The standard Galerkin method with mixed interpolation is applied. The time discretisation is performed using an explicit three-step Taylor–Galerkin method. The model is extended to the surf and swash zone by inclusion of wave breaking and a moving boundary at the shoreline. Breaking is treated by an existing surface roller model, but a new procedure for the detection of the roller thickness is devised. The model is verified using four test cases and the results are compared with experimental data and results from an existing finite difference Boussinesq model.     

Application of the first internal transcribed spacer(ITS-1) of ribosomal DNA as a molecular marker to population analysis in farrer''s scallop Chlamys farreri

Sequence variation of the first internal transcribed spacer of ribosomal DNA （ ITS - 1 ） was examined and its application to the study of genetic variation was explored in four populations of farter＇ s scallop Chlamys farreri. ITS - 1 fragments, with a length of about 300 bp,of 78 individuals collected from Dalian, Qingdao, Yantai in China and Korea respectively were amplified via PCR, cloned and sequenced. Intra-genomic variation was examined by sequencing several clones of single individuals. Alignment and polymorphism analysis detected 44 haplotypes and 50 polymorphic sites which consist of 30 substitutions and 20 indels, indicating a high level of polymorphisms. Sequence analysis also showed a very low level of intra-individual variation. All these features validated the feasibility of application of ITS - 1 fragment to population analysis. Polymorphism analysis showed that the Korea sample has the richest genetic variation, followed by Yantai and Qingdao samples. AMOVA （analysis of molecular variance） showed that the majority （96.26%） of genetic variation was distributed within populations and 3.74% resulted from among populations, but with P 〈 0.05 （ = 0.042）, indicating that the populations in this study have significant divergence. This output was basically concordant with the result arising from RAPD data and different from that from mitochondrial 16S rDNA sequence data. Discussion on this inconsistency was made accordingly.     

一种腐屑食性鱼类对生态系统氮循环的影响

研究表明 :腐屑食性鱼类——梭鱼对环境中有机氮的摄入能力随体重的增加而增加 ,随温度的升高 ,体重系数显著减少。摄入氮 (CN,mg/ d)与体重 (W,g)和温度 (T,℃ )的数值关系可用如下模型表示 :CN=0 .6 370 W1 .0 642 ln(3.70 0 8T)。体重为 1 0 0 g的梭鱼每日可消耗环境中 332 mg氮有机质。梭鱼氮的吸收效率主要受温度的影响 ,而氮的转化效率与体重呈显著的正相关关系。随体重的增加 ,排泄氮所占比例降低     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

龙须菜和扁江篱多糖的组成及其抗肿瘤效果

于１９８５－１９８７年期间用冷水和热水对采集于青岛的龙须菜和扁江篱的琼胶型多糖进行提取。两海藻的热水提取多糖都通过ＤＥＡＥ－ＳｅｐｈａｄｅｘＡ５０色谱桩用热水和不同浓度ＮａＣｌ深液前后进行洗脱分级。龙须菜和扁江篱多糖的主要级分分别为０．５ｍｏｌ／Ｌ和１．０ｍｏｌ／ＬＮａＣｌ洗脱级分。对各级分做化学分析及ＩＲ和＾１３ＣＮＭＲ光谱分析。结果表明，龙须菜多糖由琼二糖、琼胶糖前体和６－ＯＣＨ３－琼二糖组成