Borehole failure analysis in a sandstone under anisotropic stresses

Borehole failure under anisotropic stresses in a sandstone is analyze numerically for various borehole sizes using a nonlinear elastic–plastic constitutive model for a Cosserat continuum. Borehole failure is identified as macroscopic failure of the borehole through the development of shear bands and breakouts. The results compare well both qualitatively and quantitatively with experimental results from polyaxial tests on Red Wildmoor sandstone. They show that the hole size effect of the borehole failure strength is independent of the far‐field stress anisotropy and follows a ? power law of the hole size. A similar scale effect equation with a ? power law is proposed for the scale effect of the maximum plastic shear strain at failure. This equation can be useful for better predicting hole‐size‐dependent failure with standard codes based on classical continua. The effect of stress anisotropy on the borehole failure stress is found to be independent of the hole size. The failure stress decreases linearly to 40% as the stress anisotropy increases. However, the maximum plastic shear strain at failure is stress anisotropy independent and therefore the critical plastic shear strain for failure is only hole‐size dependent. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of heterogeneity on unsaturated hydraulic properties: (1) local heterogeneity and scale effect

Spatial heterogeneity is ubiquitous in nature, which may significantly affect the soil hydraulic property curves. The models of a closed‐form functional relationship of soil hydraulic property curves (e.g. VG model or exponential model) are valid at point or local scale based on a point‐scale hydrological process, but how do scale effects of heterogeneity have an influence on the parameters of these models when the models are used in a larger scale process? This paper uses a two‐dimensional variably saturated flow and solute transport finite element model (VSAFT2) to simulate variations of pressure and moisture content in the soil flume under a constant head boundary condition. By changing different numerical simulation block sizes, a quantitative evaluation of parameter variations in the VG model, resulting from the scale effects, is presented. Results show that the parameters of soil hydraulic properties are independent of scale in homogeneous media. Parameters of α and n in homogeneous media, which are estimated by using the unsaturated hydraulic conductivity curve (UHC) or the soil water retention curve (WRC), are identical. Variations of local heterogeneities strongly affect the soil hydraulic properties, and the scale affects the results of the parameter estimations when numerical experiments are conducted. Furthermore, the discrepancy of each curve becomes considerable when moisture content becomes closer to a dry situation. Parameters estimated by UHC are totally different from the ones estimated by WRC. Copyright © 2012 John Wiley & Sons, Ltd.     

基于遥感的GEF海河项目实施效果评价

GEF海河项目于2011年完工,该项目在华北地区16个县市实施,惠及2 000多万人。本文从ET、地下水超采量削减、污染物排放量控制、地表水水资源量与利用量以及出入境水质水量5个方面对GEF海河项目实施效果进行了评价。结果表明,全流域ET值减少了68.4 mm,COD和NH3-N入河总量分别减少了36.8%和8.5%、入海总量分别减少了46.1%和36.4%,地表水资源量增加了8.94%,总用水量减少了1.99×108m3,生态环境用水量增加了7.77×108m3,河湖环境明显改善。     

Bounding surface model for soil resistance to cyclic lateral pile displacements with arbitrary direction

The development of a two-surface elastic–plastic bounding surface P–Y model for cyclic lateral pile motions is described. The kinematic-hardening model is applicable to the analysis of pile foundations subjected to loading with arbitrary azimuths relative to the pile axis. The model realistically captures the hysteretic energy damping associated with dynamic loading of subsea foundations through physically correct plastic mechanisms and provides results consistent with those observed in physical tests including cyclic loading. Its performance is demonstrated in element states of stress and in pile foundation analyses. The development based on the incremental theory of plasticity results in more robust solutions than may be obtained using alternative elastic, variable moduli and deformation plasticity formulations.     

太原市地表热环境时空格局分析

针对鲜有资源型城市的地表热环境研究这一情况,该文基于Landsat8遥感数据,反演了太原市在2013—2015年间共3期的地表温度。提出一个考虑空间格局结构的城市热岛效应指数,在3期数据中,太原市区整体热岛效应指数分别为9.1%、9.8%和8.9%;同时,根据城市功能和路网结构将太原市区划分为6个分区,从分区级层面量化分析了地表热环境的时空分异特征规律,结果表明,太原市区地表温度整体呈现空间分散化特征,不同分区也呈现出不同的时空格局演变过程;最后,选取40个地表温度实测样本点验证反演精度,最大误差绝对值为1.1℃,最小误差绝对值为0.2℃,均方根误差为0.7℃。     

流域坡面汇流研究现状述评

对当前坡面汇流计算方法的研究进展进行了较为系统的总结与分析,并对坡面汇流的非线性效应以及城市低影响开发中的雨水入渗与蓄集对坡面汇流的控制作用进行了简要分析。从模型简单实用的角度出发,认为以流域时间-面积关系与线性水库相串联的ModClark法等为代表的概念性分布式坡面汇流模型具有良好的发展前景;考虑到基于等流时单元的变动等流时线法在反映雨强非线性影响中存在的问题,认为根据水文响应单元在不同雨强条件下汇流时间的变化,调整其汇流参数以反映坡面汇流的非线性效应,对于流域坡面汇流的分布式模拟更具有实际意义;针对目前低影响开发设施长时间序列大空间尺度的室外降雨径流监测资料普遍较为缺乏的现状,给出了后期应积极选择合适的技术以加强低影响开发性能监测工作的建议。     

Time-domain simulation of berthing problem between FPSO and shuttle tanker in waves

A time-domain simulation method based on potential flow model has been developed to investigate the berthing problem between two floating bodies in wave. The boundary value problem is formulated with respect to an earth-fixed coordinate system because the relative positions of the two vessels continuously change during the berthing operation. The classical finite element method is used to solve the Laplace equation in the fluid domain with moving boundary. The linearized free-surface boundary conditions are integrated in time by applying 4th-order Adams–Bashforth–Moulton method. A simple re-mesh algorithm with local and global mesh systems is introduced to update mesh by considering large horizontal movement of the berthing vessel. The developed numerical method is used to investigate the berthing problem between a FPSO and shuttle tanker in waves. The focus is on the wave-induced motion response during the berthing process. The characteristics of the motion responses in berthing operation are examined with various wave frequencies, berthing speeds and wave headings.     

海洋卡盾藻对青岛大扁藻的化感作用及其对UV-B辐射的响应

本研究以海洋微藻——赤潮藻海洋卡盾藻(Chattonella marina)与饵料藻青岛大扁藻(Platymonas helgolandica var.tsingtaoensis)为研究对象,采用单培养和共培养的方法,研究二者间的竞争关系,并在此基础上研究海洋卡盾藻去藻过滤液和藻细胞裂解液对青岛大扁藻的化感作用,同时进一步探讨两种海洋微藻间的化感作用对UV-B辐射增强的响应。结果显示:共培养条件下,海洋卡盾藻在2个高浓度下对青岛大扁藻的生长产生显著抑制(P0.05);海洋卡盾藻去藻过滤液和藻细胞裂解液对青岛大扁藻的生长也具有显著抑制作用(P0.05),且藻细胞裂解液的抑制作用更强,说明海洋卡盾藻对青岛大扁藻产生化感作用,且通过细胞间直接接触传递的化感物质多于通过介质传递的。不同密度比例的2种藻共培养组用UV-B辐射(2.16J/m2)处理后,海洋卡盾藻对青岛大扁藻生长的化感作用有所减弱。     

Incremental elastoplastic FEM for simulating the deformation process of suction caissons subjected to cyclic loads in soft clays

This paper presents an incremental elastoplastic finite element method (FEM) to simulate the undrained deformation process of suction caisson foundations subjected to cyclic loads in soft clays. The method is developed by encoding the total-stress-based bounding surface model proposed by the authors in the ABAQUS software package. According to the model characteristics, elastoplastic stress states associated with the incremental strains of each iteration are determined using the sub-incremental explicit Euler algorithm, and the state parameters describing the cyclic accumulative rates of strains are updated by setting state variables during the calculations. The radial fallback method is also proposed to modify the stress states outside the bounding surface to the surface during determination of the elastoplastic stress states. The stress reversals of soil elements are judged by the angle between the incremental deviatoric stress and the exterior normal vector at the image stress point on the bounding surface to update the mapping centre and state variables during cyclic loading. To assess the general validity of the method, the reduced scale model tests and centrifuge tests of suction caissons subjected to cyclic loads are simulated using the method. Predictions are in relative good agreement with test results. Compared with the limit equilibrium and quasi-static methods, the method can not only determine the cyclic bearing capacity, but can also analyse the deformation process and the failure mechanisms of suction caisson under cyclic loads in soft clays.     

Geological control factors of micro oil distribution in tight reservoirs

Understanding the oil distribution characteristics in unconventional tight reservoirs is crucial for hydrocarbon evaluation and oil/gas extraction from such reservoirs. Previous studies on tight oil distribution characteristics are mostly concerned with the basin scale. Based on Lucaogou core samples, geochemical approaches including Soxhlet extraction, total organic carbon (TOC), and Rock-Eval are combined with reservoir physical approaches including mercury injection capillary pressure (MICP) and porosity-permeability analysis, to quantitatively evaluate oil distribution of tight reservoirs on micro scale. The emphasis is to identify the key geological control factors of micro oil distribution in such tight reservoirs. Dolomicrites and non-detrital mudstones have excellent hydrocarbon generation capacity while detritus-containing dolomites, siltstones, and silty mudstones have higher porosity and oil content, and coarser pore throat radius. Oil content is mainly controlled by porosity, pore throat radius, and hydrocarbon generation capacity. Porosity is positively correlated with oil content in almost all samples including various lithologies, indicating that it is a primary constraint for providing storage space. Pore throat radius is also an important factor, as oil migration is inhibited by the capillary pressure which must be overcome. If the reservoir rock with suitable porosity has no hydrocarbon generation capacity, pore throat radius will be decisive. As tight reservoirs are generally characterized by widely distributed nanoscale pore throats and high capillary pressure, hydrocarbon generation capacity plays an important role in reservoir rocks with suitable porosity and fine pore throats. Because such reservoir rocks cannot be charged completely. The positive correlation between hydrocarbon generation capacity and oil content in three types of high porosity lithologies (detritus-containing dolomites, siltstones, and silty mudstones) supports this assertion.