On the geology of the Indoburman ranges

The mountains of western and northwestern Burma consist chiefly of colossal accumulations of Palaeocene to Eocene (Arakan and Chin Hills) or Senonian to Eocene (Naga Hills) Flysch of varying, including “exotic”, facies.

The main frontal thrust zone of the Alpino‐Himalayan Tectogene lies along and within the easternmost ranges of this Indoburman system, not along the western margin (Shan Scarp) of the Sinoburman Highlands. Some of the highest mountains in the Naga Hills are “Klippen” of metamorphics lying on Flysch.

The Flysch ranges arose during the Oligocene but along the Arakan Coast there is ample evidence of an equally important earlier orogenic phase (latest Cretaceous) now almost totally buried beneath the western half of the Indoburman system and the post‐Oligocene “Argille Scagliose” and “Macigno” on‐lapping eastwards from the Bengal‐Assam embayment.

The lowlands of Central and Lower Burma do not represent a foreland feature, but an intramontane Molasse‐filled basin to which the sea retained access because of a general southerly plunge of the Alpine Tectogene. Geotec‐tonically, it is analogous to the Tibetan Plateau, not the Indo‐Gangetic lowlands.     

Assessment of environmental flows under limited data availability: case study of the Acheloos River,Greece

Abstract

The lower course of the Acheloos River is an important hydrosystem in Greece, heavily modified by a cascade of four hydropower dams upstream, which is now being extended by two more dams in the upper course. The design of the dams and hydropower facilities that are in operation has not considered any environmental criteria. However, in the last 50 years, numerous methodologies have been proposed to assess the negative impacts of such projects to both the abiotic and biotic environment, and to provide decision support towards establishing appropriate constraints on their operation, typically in terms of minimum flow requirements. In this study, seeking a more environmentally-friendly operation of the hydrosystem, we investigate the outflow policy from the most downstream dam, examining alternative environmental flow approaches. Accounting for data limitations, we recommend the basic flow method, which is parsimonious and suitable for Mediterranean rivers, whose flows exhibit strong variability across seasons. We also show that the wetted perimeter–discharge method, which is an elementary hydraulic approach, provides consistent results, even without using any flow data. Finally, we examine the adaptation of the proposed flow policy (including artificial flooding) to the real-time hydropower generation schedule, and the management of the resulting conflicts.

Editor Z.W. Kundzewicz; Guest editor M. Acreman

Citation Efstratiadis, A., Tegos, A., Varveris, A., and Koutsoyiannis, D., 2014. Assessment of environmental flows under limited data availability: case study of the Acheloos River, Greece. Hydrological Sciences Journal, 59 (3–4), 731–750.     

A new algorithm for distance cartogram construction

A distance cartogram is a diagram that visualizes the proximity indices between points in a network, such as time–distances between cities. The Euclidean distances between the points on the distance cartogram represent the given proximity indices. This is a useful visualization tool for the level of service of transport, e.g. difference in the level of service between regions or points in a network and its improvement in the course of time. The two previously proposed methods—multidimensional scaling (MDS) and network time–space mapping—have certain advantages and disadvantages. However, we observe that these methods are essentially the same, and the merits of both these methods can be combined to formulate a generalized solution. In this study, we first formulate the time–space mapping problem, which includes the key features of both of the above stated methods, and propose a generalized solution. We then apply this solution to the time–distances of Japan's railway networks to confirm its applicability.     

A GIHS-based spectral preservation fusion method for remote sensing images using edge restored spectral modulation

High spatial resolution and spectral fidelity are basic standards for evaluating an image fusion algorithm. Numerous fusion methods for remote sensing images have been developed. Some of these methods are based on the intensity–hue–saturation (IHS) transform and the generalized IHS (GIHS), which may cause serious spectral distortion. Spectral distortion in the GIHS is proven to result from changes in saturation during fusion. Therefore, reducing such changes can achieve high spectral fidelity. A GIHS-based spectral preservation fusion method that can theoretically reduce spectral distortion is proposed in this study. The proposed algorithm consists of two steps. The first step is spectral modulation (SM), which uses the Gaussian function to extract spatial details and conduct SM of multispectral (MS) images. This method yields a desirable visual effect without requiring histogram matching between the panchromatic image and the intensity of the MS image. The second step uses the Gaussian convolution function to restore lost edge details during SM. The proposed method is proven effective and shown to provide better results compared with other GIHS-based methods.     

Multiple statistical approaches for the discrimination of mangrove species of Rhizophoraceae using transformed field and laboratory hyperspectral data

This study aims at discriminating eight mangrove species of Rhizophoraceae family of Indian east coast using field and laboratory spectra in spectral range (350–2500 nm). Parametric and non-parametric statistical analyses were applied on spectral data in four spectral modes: (i) reflectance (ii) continuum removed, (iii) additive inverse and (iv) continuum removed additive inverse. We introduced continuum removal of inverse spectra to utilize the advantage of continuum removal in reflectance region. Non-parametric test gave better separability than parametric test. Principal component analysis and stepwise discriminant analysis were applied for feature reduction and to identify optimal wavelengths for species discrimination. To quantify the separability, Jeffries–Matusita distance measure was derived. Green (550 nm), red edge (680–720 nm) and water absorption region (1470 and 1850 nm) were found to be optimal wavelengths for species discrimination. The continuum removal of additive inverse spectra gave better separability than the continuum removed spectra.     

Quantification of LST and CO2 levels using Landsat-8 thermal bands on urban environment

Land surface temperature (LST) is an important aspect in global to regional change studies, for control of climate change and balancing of high temperature. Urbanization is one of the influencing factors increasing land surface and atmospheric temperature, by the emission of greenhouse gases (e.g. CO₂, NO and methane). In the present study, LST was derived from Landsat-8 of multitemporal data sets to analyse the spatial structure of the urban thermal environment in relation to the urban surface characteristics and land use–land cover (LULC). LST is influenced by the greenhouse gases i.e. CO₂ plays an important role in increasing the earth’s surface temperature. In order to provide the evidence of influence of CO₂ on LST, the relationship between LST, air temperature and CO₂ was analysed. Landsat-8 satellite has two thermal bands, 10 and 11. These bands were used to accurately to calculate the temperature over the study area. Results showed that the strength of correlation between ground monitoring data and satellite data was high. Based on correlation values of each month April (R² = 0.994), May (R² = 0.297) and June (R² = 0.934), observed results show that band 10 was significantly correlating with air temperature. Relationship between LST and CO₂ levels were obtained from linear regression analysis. band 11 was correlating significantly with CO₂ values in each of the months April (R² = 0.217), May (R² = 0.914) and June, (R² = 0.934), because band 11 is closer to the 15-micron band of CO₂. From the results, it was observed that band 10 can be used for calculating air temperature and band 11 can be used for estimation of greenhouse gases.     

Petrogenesis and tectonic implications of the middle Silurian volcanic rocks in northern West Junggar,NW China

Zircon U–Pb geochronological and geochemical analyses are reported for a suite of the middle Silurian volcanic rocks from northern West Junggar (NW China), southern Central Asian Orogenic Belt (CAOB), with the aim to investigate the sources, petrogenesis, and tectonic implications. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U–Pb analysis from an andesite yielded a concordant weighted mean ²⁰⁶Pb/²³⁸U age of 429 ± 3 Ma, indicating the presence of middle Silurian volcanic rocks in northern West Junggar. The andesite is tholeiite series and characterized by minor variations in compositions (SiO₂ = 55.68–59.17 wt.%, Al₂O₃ = 14.56–17.7 wt.%, TiO₂ = 0.55–1.23 wt.%, Na₂O + K₂O = 3.46–7.16 wt.%, and P₂O₅ = 0.15–0.37 wt.%), with wider MgO content (2.18–6.48 wt.%) and Mg# (57.4–77.9). All andesitic rocks are enriched in large-ion lithophile elements (LILEs; e.g. Rb, Ba, K, and Th) and light rare earth elements (LREEs), but strongly depleted in some high field strength elements (HFSEs; e.g. Nb, Ta and Ti), with slight negative Eu anomalies (Eu/Eu* = 0.8–1). These features suggest that the andesitic magmas were derived from 2–8% partial melting of a garnet lherzolite depleted mantle source with subducted sediments metasomatized by slab-derived fluids. Combining the current study with those data in existing literature, we conclude that the middle Silurian volcanic rocks formed in an intra-oceanic subduction setting during consumption of the Irtysh–Zaysan Ocean, and further confirm the eastern extension of the early Palaeozoic Boshchekul–Chingiz volcanic arc of East Kazakhstan in China.     

Tectonic cycles of the New England Orogen,eastern Australia: A Review

The New England Orogen (NEO), the youngest of the orogens of the Tasmanides of eastern Australia, is defined by two main cycles of compression–extension. The compression component involves thrust tectonics and advance of the arc towards the continental plate, while extension is characterised by rifting, basin formation, thermal relaxation and retreat of the arc towards the oceanic plate. A compilation of 623 records of U–Pb zircon geochronology rock ages from Geoscience Australia, the geological surveys of Queensland and New South Wales and other published research throughout the orogen, has helped to clarify its complex tectonic history. This contribution focuses on the entire NEO and is aimed at those who are unfamiliar with the details of the orogen and who could benefit from a summary of current knowledge. It aims to fill a gap in recent literature between broad-scale overviews of the orogen incorporated as part of wider research on the Tasmanides and detailed studies usually specific to either the northern or southern parts of the orogen. Within the two main cycles of compression–extension, six accepted and distinct tectonic phases are defined and reviewed. Maps of geological processes active during each phase reveal the centres of activity during each tectonic phase, and the range in U–Pb zircon ages highlights the degree of diachronicity along the length of the NEO. In addition, remnants of the early Permian offshore arc formed during extensive slab rollback, are identified by the available geochronology. Estimates of the beginning of the Hunter-Bowen phase of compression, generally thought to commence around 265?Ma are complicated by the presence of extensional-type magmatism in eastern Queensland that occurred between 270 and 260?Ma.     

The Proterozoic evolution of northern Siberian Craton margin: a comparison of U–Pb–Hf signatures from sedimentary units of the Taimyr orogenic belt and the Siberian platform

Identifying the cratonic affinity of Neoproterozoic crust that surrounds the northern margin of the Siberian Craton (SC) is critical for determining its tectonic evolution and placing the Craton in Neoproterozoic supercontinental reconstructions. Integration of new U–Pb–Hf detrital zircon data with regional geological constraints indicates that distinct Neoproterozoic arc-related magmatic belts can be identified within the Taimyr orogen. Sedimentary rocks derived from 970 to 800 Ma arc-related suites reveal abundant Archean and Paleoproterozoic detritus, characteristic of the SC. The 720–600 Ma arc-related zircon population from the younger Cambrian sedimentary rocks is also complemented by an exotic juvenile Mesoproterozoic zircon population and erosional products of older arc-related suites. Nonetheless, numerous evidences imply that both arcs broadly reworked Siberian basement components. We suggest that the early Neoproterozoic (ca. 970–800 Ma) arc system of the Taimyr orogen evolved on the active margin of the SC and probably extended along the periphery of Rodinia into Valhalla orogen of NE Laurentia. We also suggest the late Neoproterozoic (750–550 Ma) arc system could have been part of the Timanian orogen, which linked Siberia and Baltica at the Precambrian/Phanerozoic transition.     

Adaminaby Group west of Batemans Bay: Deformation and metamorphism of the Narooma accretionary complex,NSW

This study provides new structural data that show that the Adaminaby Group is part of the Narooma accretionary complex and has been overprinted by HT/LP metamorphism associated with Middle Devonian Moruya Suite intrusions. The grade of metamorphism based on Kübler Indices is the same in the Wagonga and Adaminaby Groups at Batemans Bay inferring that these rocks were involved in the same accretionary event. White micas in slates of the Adaminaby Group record apparent K–Ar ages of 384.6 ± 7.9 Ma and 395.8 ± 8.1 Ma. These ages are believed to represent the age of Middle to Upper Devonian Buckenbowra Granodiorite. Kübler Index values indicate lower epizonal (greenschist facies) metamorphic conditions and are not influenced by heating in metamorphic aureoles of the plutons. All b cell lattice parameter values are characteristic of intermediate pressure facies conditions although they are lower in the metamorphic aureole of the Buckenbowra Granodiorite than in the country rock, defining two areas with dissimilar baric conditions. East of the Buckenbowra Granodiorite, b cell lattice parameter values outside the contact aureole (x = 9.033 Å; n = 8) indicate P = 4 kb, and assuming a temperature of 300°C, infer a depth of burial of approximately 15 km for these rocks with a geothermal gradient of 20°C/km. In the metamorphic aureole of the Buckenbowra Granodiorite, b cell lattice parameter values (x = 9.021 Å; n = 41) indicate P = 3.1 kb inferring exhumation of the Adaminaby Group rocks to a depth of approximately 11 km prior to intrusion. A geothermal gradient of 36°C/km operated in the aureole during intrusion. An extensional back-arc environment prevailed in the Adaminaby Group during the Middle to Upper Devonian.