Cryptic crustal contamination of MORB primitive melts recorded in olivine-hosted glass and mineral inclusions

The origin of compositional heterogeneities among the magmas parental to mid-ocean ridge basalts (MORB) was investigated using a single rock piece of the olivine-phyric basalt from 43°N, Mid-Atlantic Ridge (AII D11-177). The exceptional feature of this sample is presence of very primitive olivine crystals (90–91 mol% Fo) that are significantly variable in terms of CaO (0.15–0.35 wt%). A population of low-Ca olivine (0.15–0.25 wt% CaO) is also notably distinct from high-Ca olivine population in AII D11-177, and primitive MORB olivine in general, in having unusual assemblage of trapped mineral and glass inclusions. Mineral inclusions are represented by high-magnesian (Mg# 90.7–91.1 mol%) orthopyroxene and Cr-spinel, distinctly enriched in TiO₂ (up to 5 wt%, c.f. <1 wt% in common MORB spinel). Glass inclusions associated with orthopyroxene and high-Ti Cr-spinel have andesitic compositions (53–58 wt% SiO₂). Compared to the pillow-rim glass and “normal” MORB inclusions, the Si-rich glass inclusions in low-Ca olivine have strongly reduced Ca and elevated concentrations of Ti, Na, K, P, Cl, and highly incompatible trace elements. Strong variability is recorded among glass inclusions within a single olivine phenocrysts. We argue that the observed compositional anomalies are mineralogically controlled, and thus may arise from the interaction between hot MORB magmas and crystal cumulates in the oceanic crust or magma chamber.     

Origin and stratigraphy of phreatomagmatic deposits at the Pleistocene Sinker Butte Volcano, Western Snake River Plain, Idaho

Sinker Butte is the erosional remnant of a very large basaltic tuff cone of middle Pleistocene age located at the southern edge of the western Snake River Plain. Phreatomagmatic tephras are exposed in complete sections up to 100 m thick in the walls of the Snake River Canyon, creating an unusual opportunity to study the deposits produced by this volcano through its entire sequence of explosive eruptions. The main objectives of the study were to determine the overall evolution of the Sinker Butte volcano while focusing particularly on the tephras produced by its phreatomagmatic eruptions. Toward this end, twenty-three detailed stratigraphic sections ranging from 20 to 100 m thick were examined and measured in canyon walls exposing tephras deposited around 180° of the circumference of the volcano.Three main rock units are recognized in canyon walls at Sinker Butte: a lower sequence composed of numerous thin basaltic lava flows, an intermediate sequence of phreatomagmatic tephras, and a capping sequence of welded basaltic spatter and more lava flows. We subdivide the phreatomagmatic deposits into two main parts, a series of reworked, mostly subaqueously deposited tephras and a more voluminous sequence of overlying subaerial surge and fall deposits. Most of the reworked deposits are gray in color and exhibit features such as channel scour and fill, planar-stratification, high and low angle cross-stratification, trough cross-stratification, and Bouma-turbidite sequences consistent with their being deposited in shallow standing water or in braided streams. The overlying subaerial deposits are commonly brown or orange in color due to palagonitization. They display a wide variety of bedding types and sedimentary structures consistent with deposition by base surges, wet to dry pyroclastic fall events, and water saturated debris flows.Proximal sections through the subaerial tephras exhibit large regressive cross-strata, planar bedding, and bomb sags suggesting deposition by wet base surges and tephra fallout. Medial and distal deposits consist of a thick sequence of well-bedded tephras; however, the cross-stratified base-surge deposits are thinner and interbedded within the fallout deposits. The average wavelength and amplitude of the cross strata continue to decrease with distance from the vent. These bedded surge and fall deposits grade upward into dominantly fall deposits containing 75–95% juvenile vesiculated clasts and localized layers of welded spatter, indicating a greatly reduced water-melt ratio. Overlying these “dryer” deposits are massive tuff breccias that were probably deposited as water saturated debris flows (lahars). The first appearance of rounded river gravels in these massive tuff breccias indicates downward coring of the diatreme and entrainment of country rock from lower in the stratigraphic section. The “wetter” nature of these deposits suggests a renewed source of external water. The massive deposits grade upward into wet fallout tephras and the phreatomagmatic sequence ends with a dry scoria fall deposit overlain by welded spatter and lava flows.Field observations and two new ⁴⁰Ar–³⁹Ar incremental heating dates suggest the succession of lavas and tephra deposits exposed in this part of the Snake River canyon may all have been erupted from a closely related complex of vents at Sinker Butte. We propose that initial eruptions of lava flows built a small shield edifice that dammed or disrupted the flow of the ancestral Snake River. The shift from effusive to explosive eruptions occurred when the surface water or rising ground water gained access to the vent. As the river cut a new channel around the lava dam, water levels dropped and the volcano returned to an effusive style of eruption.     

New K–Ar ages for calculating end-of-shield extrusion rates at West Maui volcano,Hawaiian island chain

Thirty-seven new K–Ar ages from West Maui volcano, Hawai‘i, are used to define the waning stages of shield growth and a brief episode of postshield volcanism. All but two samples from shield-stage strata have reversed polarity magnetization, so conceivably the exposed shield is not much older than the Olduvai Normal-Polarity subchron, or about 1.8 Ma. The oldest ages obtained are in the range 1.9–2.1 Ma but have large analytical error. Shield volcanism ended about 1.35 Ma, and postshield volcanism followed soon thereafter, persisting until about 1.2 Ma. Exposed shield-stage strata were emplaced at a rate of about 0.001 km³ per year, a rate smaller than historic Hawaiian magmatic rates by a factor of 100. Stratigraphic accumulation rates are similar to those measured previously at Wai‘anae volcano (O‘ahu) or the upper part of the Mauna Kea shield sequence (Hilo drill core, Hawai‘i). These rates diminish sharply during the final 0.3–0.5 m.y. of the shield stage. Hawaiian shield volcanoes begin waning well before their last 0.5 m.y. of life, then end quickly, geologically speaking, if West Maui is representative.     

山东泰安岩溶水系统地下水化学环境演化

随着地表环境质量的降低以及岩溶地下水的过量开采 ,泰安市岩溶水化学环境在总体上呈现出显著退化的演化规律。自 6 0年代初以来 ,泰安市城区及旧县岩溶水的常规组分、NO-3 浓度、硬度及TDS的浓度呈现不断升高的变化趋势 ,并检出有Cr6+ 、CN-、酚等人为环境物质。水位降落漏斗区与非漏斗区、岩溶塌陷区与非岩溶塌陷区的岩溶水化学组分浓度的对比结果表明 :由于岩溶水的超量开采引起地下水动力场的改变和岩溶塌陷是控制和影响岩溶水化学环境演化的主要因素。人类活动在时间及空间尺度上与岩溶水化学环境的快速退化亦有密切的关系。     

Evaluation of density in layer compaction using SASW method

SASW test, which is non-intrusive and rapid in the field application, was used to evaluate the layer density in the roller compaction without performing the complicated inversion process. The concept of normalized shear wave velocity was introduced to minimize the effect of confinement in the density evaluation. SASW test was performed to determine the shear wave velocity of the layer, and the free–free resonant column (FF–RC) test was adopted to determine the correlation between the normalized shear wave velocity and density of the site, which is almost unique independent of confinement. Testing and data reduction procedures of both tests were briefly discussed and an evaluation procedure of the field density was proposed by effectively combining in-situ shear wave velocity determined by the SASW test with the correlation between the normalized shear wave velocity and the density determined by the FF–RC test. Finally, the feasibility of the proposed method was verified by performing a field case study at Hoengsung road construction site. Field densities determined by the proposed method matched well with those determined by sand cone tests, showing the potential of applying the proposed method in the field density evaluation.     

软土层施工桩基的新方法滚压法

介绍软土层用新型孔底工具－滚压器施工桩基的工作原理、施工工艺,滚压器基本结构及不同直径滚压器的技术特征。     

火山活动与构造气候旋回

火山活动是一种重要的地质现象,它的发生总是与构造运动相关联,构造运动有强有弱,持续时间有长有短,具有旋目性,火山活动同样也具有旋回性。大规模的火山喷发往往会对气候变化产生影响,而影响的程度取决于火山所处的位置和喷发的性质及程度。强烈的火山喷发将造成局部地区乃至全球气温下降,由此人们推测火山喷发多发生在冰期,然而统计资料表明,绝大多数火山喷发发生在间冰期,此时的构造运动也比较活跃,而在冰期时很少有火山喷发。至于火山喷发后在短时间内造成的降温与长时间的冰期不能相提并论。火山活动有旋回性,它影响的气候变化也具备有旋回性,这是构造气候旋回的一种表现形式。     

The Late Holocene to Pleistocene tephrostratigraphic record of Lake Ohrid (Albania)

We present in this work a tephrostratigraphic record from a sediment piston core (JO 2004) from Lake Ohrid. Five tephra layers were recognised, all from explosive eruptions of southern Italy volcanoes. A multidisciplinary study was carried out, including stratigraphy, AMS ¹⁴C chronology and geochemistry. The five tephra layers were correlated with terrestrial proximal counterparts and with both marine and lacustrine tephra layers already known in the central Mediterranean area. The oldest is from Pantelleria Island (P11, 131 ka BP). Other three tephra layers are from Campanian volcanoes: X6, Campanian Ignimbrite-Y5 and SMP1-Y3 (107, 39 and 31 ka BP respectively). The youngest tephra layer corresponds to the FL eruption from Etna Volcano (3.4 ka BP). In three cases these recognitions confirm previous findings in the Balkans, while two of them were for the first time recognised in the area, with a significant enlargement of the previous assessed dispersal areas.     

海洋大地电磁揭示了西太平洋苏达海山的电阻率结构

为了研究海洋板块内火山的深部电阻率结构及其形成过程,在西太平洋苏达海山进行了海洋大地电磁测量。采用主流数据处理方法SSMT2000进行数据处理,分别对旋转后的实测数据以及根据实测数据得到的两组旋转不变量数据进行一维结构假设下的大地电磁响应测试,对响应最好的YX方向数据进行一维反演,并结合一维正演、地质资料对反演结果进行综合解释。反演结果表明,苏达海山区域地壳厚度为21.5 km左右;较厚的火山碎屑岩层表明苏达海山的构建过程以喷发性的岩浆活动为主,其侵入性的岩浆活动较弱。     

Mud volcanism and fluid geochemistry in the Cheleken peninsula,western Turkmenistan

A geological and geochemical study has been carried out to investigate the relationships between major mud volcano structures and deep fluid migration in the Cheleken peninsula, in the South Caspian Basin. The fluid geochemistry allowed the origin and migration of the saline waters and the hydrocarbons to be deduced along with the regional source and reservoir rocks. The emitted waters formed by the mixing of deep highly saline water from the main source rocks of the Maykop Fm with the Caspian-like pore water contained in the Pliocene reservoirs. The water composition is very similar to that emitted by the mud volcanoes in Azerbaijan, allowing comparisons to be done between the reservoirs in the western and eastern sides of the South Caspian Basin. The associated oil is derived from a mixed type II/III kerogen deposited in a sub-oxic marine environment and generated during the early oil window. The oil biomarkers indicate that the source rock is the Maykop Fm., as previously determined for the other areas of the South Caspian Basin.The spontaneous emissions, showing different morphologies, are mainly aligned along normal and transtensive fault systems, which provide effective pathways for rapid fluid ascent from deep reservoirs to the surface.