1786年康定地震形变特征的初步研究

本文对鲜水河断裂带南东段,康定断裂地震的形变带进行了分析。认为,地震形变带主要由发育于地形斜坡上的线性坡中槽或垄岗组成。形变带具分段特点,单条长850—1500米,呈右阶“斜列式”展布,中段(极震区)一带为现状型。其中的破裂面具正断兼扭动特点。空间特征上,坡中槽一侧的交替上升变化是依次、轮换出现的,它是地震断层运动屈曲作用(Fault buckling)导致地表变形的反映。这种形变现象与该带北西段(炉霍段)走滑型地震的形变带相比有明显的差异,也表明鲜水河断裂带北西、南东两段的地震破裂方式是不尽相同的,它为同一走滑带不同地段运动特征的差异提供了证据。     

Microfabrics of calcite ultramylonites as records of coaxial and non-coaxial deformation kinematics: Examples from the Rocher de l'Yret shear zone (Western Alps)

Microfabrics were analysed in calcite mylonites from the rim of the Pelvoux massif (Western Alps, France). WNW-directed emplacement of the internal Penninic units onto the Dauphinois domain produced intense deformation of an Eocene-age nummulitic limestone under lower anchizone metamorphic conditions (slightly below 300 °C). Two types of microfabrics developed primarily by dislocation creep accompanied by dynamic recrystallisation in the absence of twinning. Coaxial kinematics are inferred for samples exhibiting grain shape fabrics and textures with orthorhombic symmetry. Their texture (crystallographic preferred orientation, CPO) is characterised by two c-axis maxima, symmetrically oriented at 15° from the normal to the macroscopic foliation. Non-coaxial deformation is evident in samples with monoclinic shape fabrics and textures characterised by a single oblique c-axis maximum tilted with the sense of shear by about 15°. From the analysis of suitably oriented slip systems for the main texture components under given kinematics it is inferred that the orthorhombic textures, which developed in coaxial kinematics, favour activity of <10–11> and <02–21> slip along the f and r planes, respectively, with minor contributions of basal-<a> slip. In contrast, the monoclinic textures, which developed during simple shear, are most suited for duplex <a> slip along the basal plane. The transition between the dominating slip systems for the orthorhombic and monoclinic microfabrics is interpreted to be due to the effects of dynamic recrystallisation upon texture development. Since oblique c-axis maxima documented in the literature are most often rotated not with but against the shear sense, calcite textures alone should not be used as unequivocal shear sense indicators, but need to be complemented by microstructural criteria such as shape preferred orientations, grain size estimates and amount of twinning.     

密集建筑群中的深基坑施工技术

以沈阳市某深基坑支护及降水工程在密集建筑群中施工为例，介绍了该支护工程的设计与施工，阐述了该工程变形监测方法并对其结果进行了分析，总结了在沈阳地区密集建筑群中进行基坑开挖的设计与施工经验。     

Deformability characteristics of brazilian laterites

This paper summarizes the resilient and permanent deformation characteristics of laterite gravels, determined by cyclic loading in triaxial tests of compacted specimens. A study of laterite pavements was carried out on eight paved road sections in the state of Mato Grosso. Also reported is the influence of fine sand admixture, specimen size and soaking in two laterite samples from Roraima and Rondônia in the North of Brazil. The experimental relationships of resilient moduli against applied stresses are interpreted empirically for models what may be incorporated in a structural analysis of full depth of laterite pavement.     

采矿引起的边坡倾倒滑移变形机理与变形安全性分析研究—以抚顺西露天矿边坡为例

在矿山开发、水电建设过程中倾倒变形问题日渐突出。倾倒变形边坡一般具有反倾边坡结构,变形的过程和机理比较复杂、涉及的变形岩体范围较大、危害严重。论文以抚顺西露天矿边坡为例,通过岩体位移监测资料的跟踪分析、底面摩擦模拟试验,以岩体力学、松散介质力学原理为理论基础,探讨了采矿影响下边坡倾倒滑移体的变形机理,分析认为采矿引起的倾倒滑移变形问题是在特定的地质构造和采矿工程条件下产生的,并提出了岩体变形安全性分析方法。通过工程实例,验证了方法的实用性,并针对实际问题提出了变形整治对策。     

小型水电站建设用地地质灾害评估技术研究——以湄尼多河小型水电站为例

现阶段,地质灾害评估技术人员在评估实践中,往往不注重各评估对象的差异性,采取同一评估模式,结果达不到评估的目的。在对小型水电站进行评估时,野外调查的重点,评估过程中所使用的方法以及危险性现状、预测及综合分区评估等与大型水电站、路线工程、矿山开采、民用建筑等工程有所不同。湄尼多河小型水电站工程位于云南省怒江州福贡县马吉乡境内,地质环境条件复杂,评估级别综合为二级。文章以该电站建设用地地质灾害危险性评估为例,对小型水电站建设用地地质灾害危险性评估的方法与理论进行探讨。     

大型钢结构变形测试方法的研究与实践

介绍了精密全站仪进行结构测试的原理和方法,通过对某大型游泳跳水馆钢结构网架在张拉和加载试验中的变形测量实践,证明其具有作业简便、能够全面反映结构变形情况之优点,且精度较高,成果可靠。