新疆境内塔拉斯 费尔干纳断裂早侏罗世走滑的古地震证据

在野外考察过程中,于新疆乌恰地区早侏罗世康苏组沼泽相砂岩层中,发现并识别出软沉积物液化变形层,变形包括负载构造,球枕构造及卷曲变形构造。通过模拟试验的对比研究认为,该软沉积物变形机制与液化作用有关,触发沉积物液化的动力是古地震,并且根据地震震级与液化最大震中距的关系,推测出造成早侏罗世软沉积物变形的里氏地震震级为6相似文献   

高、低煤阶煤层气藏地质特征及控气作用差异性研究

高、低煤阶煤层气地质特征及控气作用差异性是研究煤层气富集成藏的重要组成部分,是煤层气勘探开发理论研究过程中重要的基础性研究领域之一。本文以中国沁水、阜新盆地和美国粉河盆地等典型的含气盆地为例,探讨了高、低煤阶煤层气的储层物性差异,分析了构造控气和水文地质控气作用的差异性。研究表明,高煤阶气藏含气量高,CH4百分含量高,δ13C1值大于-38.75‰,储层渗透率变化小,储层改造难,构造热事件对煤层气的生成、富集贡献大,持续的水动力使气藏遭到破坏,且破坏幅度大,现今地下水格局对气藏的形成具有一定的影响;低煤阶气藏含气量低,CH4百分含量低,δ13C1值大于-49.11‰,储层渗透率变化大,储层易改造,煤热演化史及煤阶影响着煤层气的生成、富集,在煤层气生成过程中活跃的水动力是甲烷生成的主要的水文地质条件之一,但持续的水动力使气藏遭到破坏,且破坏幅度小,而合适的地层水矿化度则是低煤阶煤层气生成的重要条件,地下水格局对气藏的调整和改造起到决定性的影响。     

江西浒坑钨矿含矿石英脉的地质特征及成矿构造演化

位于赣西武功山地区的江西浒坑钨矿是一个大型石英脉型钨矿床,与赣南典型的“五层楼”模式不同,矿脉主要集中在岩体内接触带。含矿石英脉除了普通的块状构造以外,还普遍存在条带状构造。详细的野外编录和镜下研究表明含矿块状石英脉在形成后遭受不同程度的韧性剪切,从而形成不同成分的分异条带。剪切带以出现新生的面理和线理（拉伸线理）为特征。岩石学研究表明条带状矿石属于糜棱岩,具有丰富的塑性变形显微构造特征。通过对含矿石英脉的构造解析,认为与岩浆岩有关的原生节理系统基本上是同时形成的,沿节理充填的石英脉经历了长期的、多期次的构造运动,从而形成了复杂的石英脉和矿石类型。建立了原生节理形成→石英充填→韧性剪切发生→二期石英充填→脆性碎裂的矿区构造演化序列。韧性剪切作用的动力学背景可能是受后期岩浆侵入的影响,最后的脆性破裂应与区域上存在南北向的压应力有关。     

Delineation of groundwater protection zones by the backward particle tracking method: theoretical background and GIS-based stochastic analysis

The backward particle tracking method, an effective and powerful tool that can be used to delineate groundwater protection zones, is presented. The theoretical background and insights on the applicability of this method are provided. Moreover, the present work enriches the backward particle tracking method with an uncertainty analysis concerning the porosity values, applying a Monte Carlo (MC) approach, coupled with the use of geographical information systems (GIS). As an application example, a wellfield in the Komotini area, Greece, is investigated. The present study may serve as a potential guideline for wellfield delineation, particularly in areas like Greece where lack of data related to the hydrogeological system is often a problem.     

Plant distribution at the mobile dune scale and its relevance to soil properties and topographic features

A survey was conducted in an 11-year recovery mobile dune (RMD11) and a 20-year recovery mobile dune (RMD20), in Horqin Sandy Land, Northern China, to determine plant distribution at the mobile dune scale and its relevance to soil properties and topographic features. The results showed that (1) vegetation cover and species number increased from dune top to bottom in the restoration process of mobile dune; (2) the average value of soil organic C, total N, pH, relative height of sampling site, very fine sand content and soil water contents (40−60 and 60−80 cm) of RMD11 were less than that of RMD20, respectively, and there were significant differences (P < 0.05) between the two dunes; (3) soil resources were redistributed by shrub restoration and relative height of sampling site on dune. The distribution of sand pioneer plant, Agriophyllum squarrosum, was positively related to the relative height of sampling site and soil water content, while that of other herbaceous plants was positively related to soil nutrients in the restoration process of mobile dune. These results suggest that at mobile dune scale, plant distributions are determined by a combination of soil properties and topographic feature. Much effort should be made to preserve the interdune lowland and to improve the level of soil nutrients on mobile dune.     

Seal integrity and feasibility of CO<Subscript>2</Subscript> sequestration in the Teapot Dome EOR pilot: geomechanical site characterization

This paper reports a preliminary investigation of CO₂ sequestration and seal integrity at Teapot Dome oil field, Wyoming, USA, with the objective of predicting the potential risk of CO₂ leakage along reservoir-bounding faults. CO₂ injection into reservoirs creates anomalously high pore pressure at the top of the reservoir that could potentially hydraulically fracture the caprock or trigger slip on reservoir-bounding faults. The Tensleep Formation, a Pennsylvanian age eolian sandstone is evaluated as the target horizon for a pilot CO₂ EOR-carbon storage experiment, in a three-way closure trap against a bounding fault, termed the S1 fault. A preliminary geomechanical model of the Tensleep Formation has been developed to evaluate the potential for CO₂ injection inducing slip on the S1 fault and thus threatening seal integrity. Uncertainties in the stress tensor and fault geometry have been incorporated into the analysis using Monte Carlo simulation. The authors find that even the most pessimistic risk scenario would require ∼10 MPa of excess pressure to cause the S1 fault to reactivate and provide a potential leakage pathway. This would correspond to a CO₂ column height of ∼1,500 m, whereas the structural closure of the Tensleep Formation in the pilot injection area does not exceed 100 m. It is therefore apparent that CO₂ injection is not likely to compromise the S1 fault stability. Better constraint of the least principal stress is needed to establish a more reliable estimate of the maximum reservoir pressure required to hydrofracture the caprock.     

Anthropogenic affects on lake sedimentation process: a case study from Lake Sapanca, NW Turkey

Lake Sapanca in NW Turkey is a fault originated freshwater basin fed by seasonally variable flows of 15 streams. Considerations of lake–river interaction, supported by statistical measures of 47 bottom samples, suggest that sediment transport and deposition within the lake is controlled by two types of human constructed structures in addition to natural factors: (1) the dykes constructed in the front of streams, which feed the lake by strong flows, to prevent the filling of lakebed by coarse-grained sediments; (2) the constructed regulator on the outflowing Çarksuyu stream results in a higher sedimentation rate of clay-sized material on the NE corner of the lake, which is extraordinary in the shelf environment.     

Bedrock, soils, and hillslope hydrology in the Central Texas Hill Country, USA: implications on environmental management in a carbonate-rock terrain

The Hill Country of Central Texas, USA, is undergoing rapid socioeconomic development, but environmental management of this region is hampered by misconceptions about local bedrock, soils, terrain, and hydrologic processes. The Hill Country is underlain mostly by Glen Rose Limestone (Lower Cretaceous) and exhibits a stepped terrain, which has been incorrectly attributed to alternating hard and soft bedrock strata. Other characteristics mistakenly attributed to this landscape include thin soils with scant water-retention capabilities, and rapid runoff as the dominant hydrologic process. This report presents new findings: unweathered bedrock is well indurated, but interbeds exhibit variable weathering rates. Recessive slopes (“risers”) on this stepped terrain result from rapid deterioration of strata having generally heterogeneous depositional fabrics (bioturbation and irregular clay partings) in contrast to ledge-forming strata having homogeneous fabrics. A stony regolith is thus formed beneath risers, providing porous and permeable ground that retards runoff and promotes the formation of moderately deep to deep (two-tiered) regolith/soil zones. These surficial materials on local steep slopes compose important natural environmental buffers; they support diverse biota and enhanced geochemical cycling of nutrients; they also exhibit significant water retention and enhanced erosion abatement. Proper land management demands recognition of these attributes in the siting, design, and construction of facilities.     

The relationship between hydrodynamic properties and weathering of soils derived from volcanic rocks,Galapagos Islands (Ecuador)

The aim of this interdisciplinary study is to examine a component of the hydrological cycle in Galapagos by characterizing soil properties. Nine soil profiles were sampled on two islands. Their physical and hydrodynamic properties were analyzed, along with their mineralogical composition. Two groups of soils were identified, with major differences between them. The first group consists of soils located in the highlands (>350 m a.s.l.), characterized by low hydraulic conductivity (<10⁻⁵ m s⁻¹) and low porosity (<25%). These soils are thick (several meters) and homogeneous without coarse components. Their clay fraction is considerable and dominated by gibbsite. The second group includes soils located in the low parts of the islands (<300 m a.s.l.). These soils are characterized by high hydraulic conductivity (>10⁻³ m s⁻¹) and high porosity (>35%). The structure of these soils is heterogeneous and includes coarse materials. The physical properties of the soils are in good agreement with the variations of the rainfall according to the elevation, which appears as the main factor controlling the soil development. The clayey alteration products constrain soils physical and hydrodynamic properties by reducing the porosity and consequently the permeability and also by increasing water retention.     

Numerical modeling assessment of three-gate structures for capturing contaminated groundwater

This modeling study evaluated the capability of alternative funnel-and-gate structures with three gates for capturing contaminated groundwater in a hypothetical unconfined aquifer. Simulated interceptor structures were linear and 45 m wide, consisting of three gates and two funnels (walls). One gate occupied the center and two gates occupied the ends of the interceptor structures. The structures, positioned perpendicular to regional groundwater flow, traversed the entire thickness of the aquifer. A total of four structures were evaluated (numbers designate widths of end, center, and end gates, respectively, in meters): 3-3-3, 2-5-2, 1-7-1, and 4-1-4. Particle tracking and zonal water budgets identified shapes of capture zones and discharge patterns for each interceptor structure. A mass transport model, accounting for advection and hydrodynamic dispersion, tested the capability of each structure for capturing a contaminant plume. Results suggest that: time-dependent capture zones underestimate the amount of time to capture a contaminant plume, wide center gates facilitate plume capture, and wide end gates facilitate lateral containment of contaminants. Of the structures simulated, the 2-5-2 configuration was relatively efficient at processing and containing the simulated contaminant plume.