宁波北仑蓝天船厂岩质边坡稳定性分析

宁波北仑蓝天船厂的岩质边坡均为人工爆破山体后形成的,由于爆破后的岩质边坡没有经过人工处理,所以边坡具有倾角大、风化强、节理发育等特点,已经影响到厂区的安全生产,必须对岩质边坡进行稳定性分析。通过野外现场测绘,运用极射赤平投影法对边坡岩体结构面进行稳定性分析,并在此基础上给出岩质边坡的总体评价和处理意见。     

Study of the Seismogenic Structure of the October 12th, 2019 MS5.2 Beiliu Earthquake, Guangxi, China

On October 12~(th),2019,a M_S5.2 earthquake occurred in Beiliu City,Guangxi Zhuang Autonomous Region,China,with a focal depth of 10 km. The epicenter is located in the junction of Guangxi and Guangdong where the moderate-strong earthquakes are relatively active. The highest intensity of this earthquake is estimated up to Ⅵ besides the isoseismic line showed an ellipse shape with a long axis trend in the NW direction.The aftershocks are not evenly distributed. The parameters of the focal mechanism solutions are: strike 346°,dip 85°,rake 19° for the nodal planeⅠ,and strike 254°,dip 71°,rake 175° for the nodal planeⅡ. The type of the coseismic fault is strikeslip. After analyzing these results above and the active faults near the epicenter,we get that the nodal planeⅠ is interpreted as the coseismic rupture plane and the BamaBobai Fault is a seismogenic structure of M_S5.2 Beiliu earthquake.     

坐标转换四参数解算的整体最小二乘新方法

在平面四参数坐标转换模型中,观测向量和误差方程系数矩阵中部分元素都存在误差。提出一种使用整体最小二乘迭代法求解坐标转换四参数的新方法,只改正系数矩阵中含误差的元素,同时使系数矩阵中不同位置的相同元素具有相同改正数,理论上更严谨。设计了平面四参数模型坐标转换实验数据,通过与经典最小二乘、整体最小二乘、混合整体最小二乘3种方法结果对比,验证了新方法的可行性且解算结果更优。     

沂沭断裂带安丘-莒县断裂安丘-朱里段几何结构与活动特征

安丘-莒县断裂是沂沭断裂带最主要的活动断裂,对强震的发生具有明显的控制作用。该断裂的安丘—朱里段由南流段、双官—眉村段和朱里段3条右阶斜列的次级断裂所组成,以右旋走滑活动为主,兼有正断或逆冲活动分量;其最新活动时代推断为晚更新世—全新世早期。根据断裂活动性的最新研究成果,认为在莒县至昌邑之间安丘-莒县断裂仍是占主导地位的活动断裂,与公元前70年安丘7级地震的发生具有密切关系     

A numerical study on the cumulative out‐of‐plane damage to church masonry façades due to a sequence of strong ground motions

Seismic shocks occur sometimes as a sequence, close in space and time, of destructive events of comparable intensity. In these cases, a significant portion of the damage to historical buildings can be related with the cumulated damage on structures that become progressively more vulnerable. This research investigates the specific increase of damage determined by a sequence of strong ground motions, focusing the interest on the out‐of‐plane response of 2 church masonry façades. The dynamic analyses were performed by a specific rigid body and spring model RBSM, which only accounts for out‐of‐plane damage mechanisms. Two idealized models of façade, each made of 2 different masonry bonds, have been studied by applying various sequences of recorded accelerograms. The results highlighted a complex relationship between the spectral content of the seismic shocks and the characteristics of the structures that change in the course of the loading sequence due to the development of damage. The Housner spectral intensity proved to be a reliable scalar measure of the ground motion destructiveness for these façades. Moreover, when considering a design‐consistent accelerogram that causes a relevant damage pattern, ie, with a significant elongation of the effective first period of vibration, the numerical results indicated a possible spectral intensity threshold below which the occurrence of repeated seismic shocks, both before and after the reference design shock, can be considered as irrelevant. On the other hand, a catastrophic increase of damage should be expected when this threshold is overcome.     

INTERPRETATION AND ANALYSIS OF THE FINE FAULT GEO-METRY BASED ON HIGH-RESOLUTION DEM DATA DERIVED FROM UAV PHOTOGRAMMETRIC TECHNIQUE: A CASE STUDY OF TANGJIAPO SITE ON THE HAIYUAN FAULT

Fault-related tectonic geomorphologic features are integrated expressions of multiple strong seismological events and long-term surface processes, including crucial information about strong earthquake behavior of a fault. It's of great significance to identify the strong seismic activity information from faulted landscapes, which include the date and sequence of the seismic activities, displacements, active fault features, for studying the seismic rupture process, predicting the future seismic recurrence behavior and evaluating the seismic hazard of the fault. However, due to the restriction of measuring techniques and the subsequent poor quality of the acquired data, it has been difficult to accurately extract such information from complex tectonic landforms to study active faults for a long time. Recently, "small Unmanned Aerial Vehicle(sUAV)" photogrammetric technique based on "Structure from Motion(SfM)" provides a cost-efficient and convenient access to high-resolution and high-accuracy "digital elevation models(DEMs)" of tectonic landforms. This paper selects the Tangjiapo area at the Haiyuan Fault to conduct data collection, in which the structural and geomorphic features are well preserved. Using a small quadrotor unmanned aerial vehicle(Inpire 2), we collect 1598 aerial photographs with a coverage area of 0.72km². For calibrating the accuracy of the aerial data, we set 10 ground control points and use differential-GPS to obtain the spatial coordinates of these control points. We use model software Agisoft PhotoScan to process these digital pictures, obtaining high-resolution and high-accuracy DEM data with the geographic information, in which data resolution is 2.6cm/pix and the average density of point cloud is 89.3 point/m². The data with these accuracy and resolution can fully show the real geomorphic features of the landform and meet the requirements for extracting specific structural geomorphic information on the surface. Through the detailed interpretation of the tectonic landforms, we identify a series of structures associated with the strike-slip fault and divide the alluvial fan into four stages, named s₁, s₂, s₃, and s₄, respectively.Wherein, the s₁ is the latest phase of the alluvial fan, which is in the extension direction of the Haiyuan Fault and there isn't any surface fracture, indicating that the s₁ was formed after the M8.5 Haiyuan earthquake in 1920. The rupture zone on the s₂ fan is composed of varied kinds of faulting geomorphologic landforms, such as a series of en echelon tension-shear fractures trending 270°~285°, fault scarps and seismic ridges caused by the left-lateral motion of the seismic fault. In addition, a number of field ridges on the s₂ fan were faulted by the 1920 Haiyuan M8.5 earthquake, recording the co-seismic displacements of the latest earthquake event. Relatively speaking, the surface rupture structure of the s₃ fan is simple, mainly manifested as linear fault scarp with a trend of 270°~285°, which may indicate that multiple earthquakes have connected the different secondary fractures. And a small part of s₄ fan is distributed in the southwest of the study area without fault crossing. Furthermore, we measured the horizontal displacements of river channels and vertical offsets of fault scarps. The faulted ridge on the s₂ fan and faulted gully on the s₃ fan provide good linear markers for obtaining the fault left-lateral dislocation. We used the graphical dislocation measurement software LaDiCaoz developed based on Matlab to restore the gully position before the earthquake by comparing the gully morphology on both sides of the fault, and then determined the horizontal offset of s₂, which is(4.3±0.4)m and that of s₃ is(8.6±0.6)m. In addition, based on the DEM data, we extracted the fault scarp densely along the fault strike, and obtained the vertical offset of s₂, which is(4.3±0.4)m and that of s₃ is(1.79±0.16)m. Moreover, we detect slope breaks in the fault scarp morphology. For compound fault scarps generated by multiple surface rupture earthquakes, there are multiple inflection points on the slope of the topographic section, and each inflection point represents a surface rupture event. Therefore, the slope break point on the scarp becomes an important symbol of multiple rupture of the fault. The statistical result shows that the slope breaks number of s₂ is 1 and that of s₃ is 2. Based on the analysis of horizontal displacements of river channels and vertical offsets of fault scarps as well as its slope breaks, two surface rupturing events can be confirmed along the Tangjiapo area of the Haiyuan Fault. Among them, the horizontal and vertical displacements of the older event are(4.3±0.95)m and(0.85±0.22)m, respectively, while that of the latest event are(4.3±0.4)m and(0.95±0.14)m, which are the coseismic horizontal and vertical offsets of the 1920 Haiyuan earthquake. These recognitions have improved our cognitive level of the fine structure of seismic surface rupture and ability to recognize paleoearthquake events. Therefore, the high-resolution topographic data obtained from the SfM photogrammetry method can be used for interpretation of fine structure and quantitative analysis of microgeomorphology. With the development of research on tectonic geomorphology and active tectonics toward refinement and quantification, this method will be of higher use value and practical significance.     

澜沧江小湾水库诱发地震的断裂构造条件分析

分析了小湾水库库区的断裂构造条件和地质结构特征,在此基础上划分了4个易于产生诱发地震的危险库段。并对各危险库段诱发地震的震级进行了初步预测。     

Fractal size and spatial distributions of fault zones: An investigation into the seismic Chelungpu Fault, Taiwan

Abstract   The fractality of fault zones of thickness T for the 248-m-long core from a borehole penetrating the northern segment of the seismic Chelungpu Fault, Taiwan, was analyzed. The frequency curve of T shows that the fractal dimension is normal when T is smaller than a characteristic thickness T _c, and it becomes abnormally large when T exceeds T _c. The fractal dimensions of size and spatial distributions of T increase as the mean distribution density of T increases, which is inconsistent with the evolution laws for ordinary brittle faults. This discrepancy implies that the thickening rate of T when T is more than T _c is not constant, but a decreasing function of fault displacement. The slow thickening rate is related to the elastohydrodynamic lubrication which was effective on the fault when T exceeds T _c. This slip instability mechanism can explain the large, fast and smooth slip on the northern segment of the Chelungpu Fault during the 1999 Chi-Chi earthquake.     

STUDY ON PALEOEARTHQUKES ALONG THE FODONGMIAO-HONGYAZI FAULT,GANSU PROVINCE

The Fodongmiao-Hongyazi Fault is a Holocene active thrust fault, belonging to the middle segment of northern Qilianshan overthrust fault zone, located in the northeastern edge of the Tibet plateau. The Hongyapu M7(1/4) earthquake in 1609 AD occurred on it. A few paleo-seismology studies were carried out on this fault zone. It was considered that four paleoearthquakes occurred on the Fodongmiao-Hongyazi Fault between(6.3±0.6) ka BP and(7.4±0.4) ka BP, in(4.3±0.3) ka BP, in(2.1±0.1) ka BP and in 1609 AD. The occurrences of the earthquakes suggested the quasi-periodic characteristic with a quasi-periodic recurrence interval between 1 600~2 500a(Institute of Geology, State Seismological Bureau, Lanzhou Institute of Seismology, State Seismological Bureau. 1993; Liu et al., 2014). There was no direct evidence for the Hongyapu M7(1/4) earthquake in 1609 AD from trench research in the previous studies. Great uncertainty exists because of the small number of the chronology data, as a few TL and OSL measurement data and several¹⁴ C data, and it was insufficient to deduce the exact recurrence interval for the paleoearthquakes. Five trenches were excavated and cleared up respectively in the eastern segment, middle segment and western segment along the Fodongmiao-Hongyazi Fault. After detail study on the trench profiles, the sedimentary characteristics, sequence relationship of the stratigraphical units, and fault-cuts in different stratigraphical units were revealed in these five trenches. Four paleoearthquakes in Holocene were distinguished from the five trenches, and geology evidences of the Hongyapu M7(1/4) earthquake in 1609 AD were also found. More accurate constraint of the occurring time of the paleo-earthquakes since Holocene on the Fodongmiao-Hongyazi Fault is provided by the progressive constraining method(Mao and Zhang, 1995), according to amounts of ¹⁴ C measurement data and OLS measurement data of the chronology samples from different stratigraphical units in the trenches. The first paleoevent, E4 occurred 10.6ka BP. The next event, E3 occurred about 7.1ka BP. The E2 occurred about 3.4ka BP. The last event, E1 is the Hongyapu M7(1/4) earthquake in 1609 AD. Abounds of proofs for the occurrences of the events of E1, E2 and E3 were found in the trench Tc1, trench Tc2, trench Tc4 and trench Tc3, located in the eastern, middle and western segments of the Fodongmiao-Hongyazi Fault accordingly. It's considered that the events E1, E2 and E3 may cause whole segment rupturing according to the proofs for these three events found together in individual trenches. The event E4 was only found in the trench Tc5 profile in the west of the Xiaoquan village in the eastern segment of the Fodongmiao-Hongyazi Fault. The earthquake rupture characteristics of this event can't be revealed before more detailed subsequent research. The time intervals among the four paleoearthquakes are ca 3.5ka, ca 3.7ka, and ca 3.0ka. The four events are characterized by ca 3.4ka quasi-periodic recurrence interval.     

闽西南马坑式铁矿成矿结构面特征及找矿意义

马坑式铁矿位于闽西南晚古生代坳陷盆地内,是福建省境内最主要的矽卡岩型铁-多金属矿床。矿体主要受岩性界面及构造结构面控制,尤以硅钙面控矿作用显著。马坑式铁矿主矿体定位于林地组（C₁l）石英砂岩与经畲—栖霞组（C₂j—P₂q）碳酸盐岩的岩性界面（硅钙面）。通过对马坑式铁矿硅钙面的基本特征进行分析,划分了五类主要的成矿结构面类型:林地组与经畲组—栖霞组、经畲组—栖霞组与文笔山组、经畲—栖霞组内部碎屑岩与灰岩、经畲组—栖霞组与花岗岩类以及推覆（滑脱）界面。研究认为马坑式铁矿主矿体受不同的物理化学岩性界面（硅钙面）控制,这种界面在构造活动及流体参与过程中容易形成扩容空间,构成成矿地球化学障,有利于成矿物质的沉淀富集。在以上认识基础上,建立了以硅钙面为主要成矿作用标志的马坑式铁矿成矿模式,认为运用硅钙面控矿理论指导闽西南地区找矿预测的具有重要的找矿指导意义。