深基础护坡桩的设计与施工中的几个问题

着重介绍了间隔式钻孔灌注桩在挡土护坡技术中的应用方法，设计时的主要参考依据，计算土压力理论的应用原则以及施工中需注意的几个问题，为进行深基础挡土护坡的工程提供了部分参考依据。     

浅议中国地震科技期刊

对地震系统科技期刊普遍存在的问题进行了梳理．分析了形成的原因。指出，只有摆脱传统办刊的束缚．树立全行业、全社会办刊的意识．进行管理模式的改革、对系统内期刊进行整合、与系统外期刊进行联合．才能使地震科技期刊走出困境。     

A Simple Parameterisation for Flux Footprint Predictions

Flux footprint functions estimate the location and relative importance of passive scalar sources influencing flux measurements at a given receptor height. These footprint estimates strongly vary in size, depending on receptor height, atmospheric stability, and surface roughness. Reliable footprint calculations from, e.g., Lagrangian stochastic models or large-eddy simulations are computationally expensive and cannot readily be computed for long-term observational programs. To facilitate more accessible footprint estimates, a scaling procedure is introduced for flux footprint functions over a range of stratifications from convective to stable, and receptor heights ranging from near the surface to the middle of the boundary layer. It is shown that, when applying this scaling procedure, footprint estimates collapse to an ensemble of similar curves. A simple parameterisation for the scaled footprint estimates is presented. This parameterisation accounts for the influence of the roughness length on the footprint and allows for a quick but precise algebraic footprint estimation.     

数据分析法确定嶂山闸闸基渗透压力

闸基渗透压力是影响水闸闸室稳定的关键性因素。当水闸同时受到上下游水位差、基底承压水头、粘性土地基扬压力滞后等多重因素作用时 ,闸基渗透压力的估算就变得比较困难。通过对嶂山闸闸基历年实测渗透压力数据进行统计分析 ,初步揭示其基底渗透压力的变化规律 ,为该闸闸室稳定性分析提供依据。     

水域静力触探设备的研制和应用

为详细了解崇明越江通道南港隧道段地层情况 ,设计要求提供长江水域静探资料。简介了我院水域静力触探设备的研制和应用情况     

A model for grain-size sorting over tidal sand ridges

A model was developed and analyzed to quantify the effect of graded sediment on the formation of tidal sand ridges. Field data reveal coarse (fine) sediment at the crests (in the troughs), but often phase shifts between the mean grain-size distribution and the bottom topography occur. Following earlier work, this study is based on a linear stability analysis of a basic state with respect to small bottom perturbations. The basic state describes an alongshore tidal current on a coastal shelf. Sediment is transported as bed load and dynamic hiding effects are accounted for. A one-layer model for the bed evolution is used and two grain size classes (fine and coarse sand) are considered. Results indicate an increase in growth and migration rates of tidal sand ridges for a bimodal mixture, whilst the wavelength of the ridges remains unchanged. A symmetrical externally forced tidal current results in a grain-size distribution which is in phase with the ridges. Incorporation of an additional external M₄ tidal constituent or a steady current results in a phase shift between the grain-size distribution and ridge topography. These results show a general agreement with observations. The physical mechanism responsible for the observed grain-size distribution over the ridges is also discussed.Responsible Editor: Jens Kappenberg     

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.     

Method of high-density seismic imaging ex-ploration and application samples

Introduction Now, shallow seismic reflection wave technique has been used extensively in geological ex-plorations of bridge, dam, high building and so on. Since shallow seismic reflection wave tech-nique is often implemented in industrial zone or city with dense population, the background dis-turbance including industrial noise, life noise, etc is very serious. Furthermore, the disturbance of seismic source is also serious due to short array length and offset of the method. In general, shal-lo…     

Fundamental study on the response characteristics of drivers during an earthquake based on driving simulator experiments

After the 1995 Kobe earthquake, the expressway structures in Japan were retrofitted and they will not now be seriously damaged under a certain level of strong earthquake motion. However, the stability of a moving vehicle has not been investigated yet. It has been reported that drivers feel seismically induced vibrations, especially in the transverse direction of vehicles. Owing to this phenomenon, drivers have some difficulty in controlling the vehicles during strong shaking. For further safety promotion of the expressway networks, it is important to understand the drivers' reactions to seismic motion. The present authors have performed a series of seismic response analyses of a moving vehicle to investigate its response characteristics based on numerical simulation. However, the responses of the driver were not considered in the simulation process. In order to investigate the drivers' reactions during an earthquake, a series of virtual tests were conducted using a driving simulator. This driving simulator has six servomotor‐powered electric actuators that control its motions. Several types of tests were carried out for different examinees to investigate drivers' responses while controlling the simulator under seismic motion. The results of this study showed that a larger response time lag to strong shaking and over turning of the steering wheel may shift the vehicle into the next lane. According to this finding, trafficaccidents could possibly occur under strong ground shaking in the case of heavy traffic. Copyright © 2004 John Wiley & Sons, Ltd.     

小秦岭金矿含金石英脉中黄铁矿晶体的表面微形貌研究

利用微分干涉显微镜、扫描电镜、透射电镜等对小秦岭金矿含金石英脉中黄铁矿晶体的表面微形貌进行了研究。黄铁矿晶体的{210}面上发育自由生长层，表明{210}面是F面，其生长机理受二维成核层生长所制约。除简单的五角十二面体外，其他形态黄铁矿晶体的{210}面上也发育有自由生长层。{210}面上的正条纹有些是由{100}面上生长层的边缘台阶在{210}面上叠堆形成，另一些正条纹则是{210}面上生长层边缘台阶堆叠的产物。透射电镜和电子衍射花样研究表明，负条纹黄铁矿晶体是由30～50nm大小的核团经自动定向附生作用形成，每个核团不是单晶体，而是由许多早先在溶液中形成的小微晶聚合而成。这些特征表明负条纹黄铁矿晶体是在溶液过饱和度极高和温度梯度小的理想环境中形成，它的形成与杂质无关。PBC理论和唐纳-哈克定律能较好地解释自然界中黄铁矿晶体{100}面上普遍发育自由生长层、而{210}面上自由生长层极为罕见的原因。除日本释迦内矿区黑矿之上的浮岩凝灰岩中产生出负条纹黄铁矿晶体外，在石英脉型金矿床中也有负条纹黄铁矿晶体产出。