GIS叠置图层方差分量的极大似然估计

针对GIS叠置中的同名点,以维希特分布密度为似然函数,提出了各图层方差分量的极大似然估计方法。该方法不依赖残差,不需要迭代就能估计未知参数和方差分量。     

野外简易脱气装置简介

根据水力学原理结合水氡在实验室分析中水样鼓泡脱气的方法 ,进行了大量的野外试验 ,研制开发了野外简易脱气装置。通过几个月的试观测 ,脱气装置气流稳定 ,脱气效率高 ,完全可以满足自动化观测仪器对气量的需求。该装置解决了地下水化学在野外冷水泉无法进行气体观测的难题 ,而且制作简单、费用低廉 ,非常便于推广。     

Size Scaling of Cross Correlation Between Multiple Variables

Reservoir models have large uncertainty because of spatial variability and limited sample data. The ultimate aim is to use simultaneously all available data sources to reduce uncertainty and provide reliable reservoir models for resource assessment and flow simulation. Seismic impedance or some other attribute provides a key source of data for reservoir modeling. These seismic data are at a coarser scale than the hard well data and it not an exact measurement of facies proportions or porosity. A requirement for data integration is the cross-covariance between the well and seismic data.The size-scaling behavior of the cross correlation for different measurement scales was nvestigated. The size-scaling relationship is derived theoretically and validated by numerical studies (including an example with real data). The limit properties of the cross-correlation coefficient when the averaging volume becomes large is shown. After some averaging volume, the volume-dependent cross-correlation coefficient reaches a limit value. This plateau value is controlled mainly by the large-scale behavior of the cross and direct variograms.The cross correlation can increase or decrease with volume support depending on the relative importance of long- and short-scale covariance structures. If the direct and cross variograms are proportional, there is no change in the cross correlation as the averaging volume changes. Our study shows that the volume-dependent cross-correlation coefficient is sensitive to the shape of the cross variogram and differences between the direct variograms of the well data and seismic data.     

钾-氩和氩-氩定年样品的送样要求及预处理

介绍了K-Ar和Ar-Ar法定年样品的送样要求及实验室预处理程序，样品粒度以250～180μm为宜；用量则视样品的K含量和年龄情况而定，K含量越高、年龄越老，所需样品量越少，多数样品的用量在几十至几百毫克；对于年龄情况不清楚的样品，10～20g手标本或者1～2g合适粒度的样品可以保证用量。全岩样品常受蚀变和捕虏晶的影响，有效的预处理可以在很大程度上消除这些干扰因素。文章还介绍了用稀HNO3消除碳酸盐、1．7mol／L HF消除轻微蚀变的影响以及电磁选剔除捕虏晶的实验过程。     

A mathematical model of concentrate solids content for the wet drum magnetic separator

Low concentrate density from wet drum magnetic separators in dense medium circuits can cause operating difficulties due to inability to obtain the required circulating medium density and, indirectly, high medium solids losses. The literature is almost silent on the processes controlling concentrate density. However, the common name for the region through which concentrate is discharged—the squeeze pan gap—implies that some extrusion process is thought to be at work. There is no model of magnetics recovery in a wet drum magnetic separator, which includes as inputs all significant machine and operating variables.A series of trials, in both factorial experiments and in single variable experiments, was done using a purpose built rig which featured a small industrial scale (700 mm lip length, 900 mm diameter) wet drum magnetic separator. A substantial data set of 191 trials was generated in this work. The results of the factorial experiments were used to identify the variables having a significant effect on magnetics recovery.It is proposed, based both on the experimental observations of the present work and on observations reported in the literature, that the process controlling magnetic separator concentrate density is one of drainage. Such a process should be able to be defined by an initial moisture, a drainage rate and a drainage time, the latter being defined by the volumetric flowrate and the volume within the drainage zone. The magnetics can be characterised by an experimentally derived ultimate drainage moisture. A model based on these concepts and containing adjustable parameters was developed. This model was then fitted to a randomly chosen 80% of the data, and validated by application to the remaining 20%. The model is shown to be a good fit to data over concentrate solids content values from 40% solids to 80% solids and for both magnetite and ferrosilicon feeds.     

双多普勒雷达风场反演误差和资料的质量控制

提出了用双多普勒雷达观测资料进行回波强度、径向速度和方位定位的质量控制方法，以及利用概率分布法订正配对的双多普勒雷达回波强度的方法。以2001年973“中国暴雨”外场试验期间获取的双多普勒雷达观测资料为例，比较了合肥、马鞍山和宜昌、荆州的两对双多普勒雷达同步观测的回波强度、径向速度和方位的改变对观测数据对比的影响；分析了这两对双多普勒雷达径向速度测量误差引起的风场反演的误差。结果表明:两对双多普勒雷达观测的回波强度和径向速度的空间位置和变化趋势比较一致，合肥与马鞍山雷达的回波强度有一定差异，径向速度也有1～2 m/s的差异。风场反演的误差与风场的方向、大小、空间位置等有关。在两个径向速度夹角在40°～140°范围内，共面上的风场的反演误差在1～2倍的雷达探测径向速度的误差范围内。     

用几何光学模型对方向变化和直方图建模(英文)

森林和林地的图象二向性反射函数是一个统计函数，较之小尺度的树冠，它更多地用于大尺度的均匀覆盖的地块。用航空象片和高空间分辨率扫描仪数据作的图象热点影响研究在小尺度下显示出很大方差，而且，太阳和观测角度的交互变化进一步增加了这种反射各向异性变化的方差并有规律地继续呈现在分辨率低的图象中，这被称作ＢＲＶＦ或二向性反射方差函数。近年来，作为一种解释结构的手段，高分辨率图象的方向性方差和直方图结构越来越受到重视，这方面的数据也越来越多。这项工作是利用图象方差来解释结构问题（Ｓｔｒａｈｌｅｒ和李小文倡导）的一种延伸，并在过去１５年中由众多人员作了大量工作。在树冠尺度下，森林的直方图和二向反射方差函数可以计算出来，这里利用了近似迭代函数来处理这些数据并和数值积分模拟进行了对比，结果显示可对二向性反射方差函数的测量和引入直方图的各向异性进行准确建模。     

氢化物分离一化学发光法测定痕量锑

采用Luminol－H。O。Air（巨）化学发光反应体系作为分析检测方法，建立了一个测定地质样品中痕量锑的化学发光分析法。方法的原理是用AgNO。吸收由样品发生的氢化锑气体，使吸收液中生成Sb（巨）与过量的K。Cr。O，反应生成Cr（1），方法的检出限为0．6us／mlSb，工作曲线的线性范围是2～1000ng／mlSb，测定的相对标准偏差小于5％。本方法已用于地质样品中痕量佛的测定。     

井间地震串联滤波波场分离方法

本文根据井间地震波场响应以及多种波场分离方法的性能，采用基于Ｋ－Ｌ变换的特征向量滤波与中值滤波相结合的串联滤波方法分离井间地震观测到的上、下行反射波。数值计算结果表明：在波场分离过程中，由于同时综合考虑了地震波能量主分量分布以及反射波同相轴时差两个参数，使得分离效果明显、处理更为简便，具有滤波特征矢量的选取条件更为宽松、无需精确确定拉平轴的时间等特点。