Field survey of the East Java earthquake and tsunami of June 3, 1994

A field survey of the June 3, 1994 East Java earthquake tsunami was conducted within three weeks, and the distributions of the seismic intensities, tsunami heights, and human and house damages were surveyed. The seismic intensities on the south coasts of Java and Bali Islands were small for an earthquake with magnitudeM 7.6. The earthquake caused no land damage. About 40 minutes after the main shock, a huge tsunami attacked the coasts, several villages in East Java Province were damaged severely, and 223 persons perished. At Pancer Village about 70 percent of the houses were swept away and 121 persons were killed by the tsunami. The relationship between tsunami heights and distances from the source shows that the Hatori's tsunami magnitude wasm=3, which seems to be larger for the earthquake magnitude. But we should not consider this an extraordinary event because it was pointed out byHatori (1994) that the magnitudes of tsunamis in the Indonesia-Philippine region generally exceed 1–2 grade larger than those of other regions.     

耗能-隔震柔性底层钢管混凝土-钢筋混凝土组合框架的实验研究

本文用钢管混凝土柱作为结构底层耗能柱、用承重墙和隔震器控制结构底层倒塌破坏,从而提出了一种新的耗能-隔震柔性底层结构体系。通过本文12根钢管混凝土柱和文献[7]中7根钢管混凝土柱的低周疲劳实验,初步确定了钢管混凝土柱地震损伤模型的参数;通过两个钢管混凝土-钢筋混凝土三层框架模型和一个纯钢筋混凝土三层框架模型的拟动力实验,研究和比较了两类结构体系的地震损伤。     

The physical properties of quartz-micaschist and their application to freeze-thaw weathering studies in the maritime antarctic

As part of a study on freeze-thaw weathering in the maritime Antarctic an investigation was made of the physical properties of the local rock. Tests were made of point-load compressive strength, Schmidt hammer in situ rock strength, moisture content, indentor resistance and the size range of weathering products. The resulting data were used to consider the form of freeze-thaw weathering operative in the field and its relationship to laboratory simulations. A distinct difference between ‘massive rock’ and ‘intact rock’ is observed in the field. It is suggested that future studies should generate a greater database pertaining to rock properties as it is an invaluable aid in the study of mechanical weathering.     

River channel adjustments downstream from channelization works in England and Wales

Relatively little attention has been given to river channel adjustments that occur downstream from channelization works. This study is concerned with the nature of channel adjustments downstream from a total of 46 channelization works located in low and high energy environments in England and Wales. Channel changes are identified principally by the method of field survey and by reconstructing the original positions of eroded beds and banks. Use is also made of maps, aerial photographs, and engineering drawings of different dates and the technique of space-for-time substitution is applied. Enlargement of channel cross-sections through erosion had occurred downstream from a variety of types, sizes, and dates of channelization works. The maximum increase of channel size was 153 per cent. Out of a total of 14 sites with enlarged channel cross-sections, seven had undergone a change of width only, at a further three width increased rather than depth, and at the remaining four sites depth increases were dominant. These sites all have relatively high stream powers. Factors causing spatial variation of erosion included tree roots locally binding bank sediments and the occurrence of bends. Planform change had taken place at only one site. A further three high stream power sites had downstream reaches incised into bedrock and therefore did not exhibit adjustment. Channel enlargement is explained in terms of increased flood flows downstream from channelization works causing higher stream velocities, which in turn cause erosion, thereby increasing channel width and/or depth. Examination of flow records for 35 stations revealed flood events which would formerly have spread overbank but are now confined by the channelization works and are therefore likely to alter downstream flows. At sites with downstream change it is proposed that the energy of increased flows was sufficient to exceed a threshold required for erosion of perimeter sediments. By contrast the absence of change at a majority of sites in low energy lowland areas could be a reflection of both the incompetence of increased flows to erode and resistance provided by perimeter sediments. Sites with erosion features appear not to have yet attained new equilibrium conditions.     

A Combined Three-Dimensional Geological-Geostatistical-Numerical Model of Underground Excavations in Rock

Summary. This paper exploits geological and borehole geotechnical data obtained in the exploratory phase of a tunneling project to investigate in a first place if the kriging interpolation scheme may effectively reproduce the spatial variability of rock mass quality (Rock Mass Rating, RMR) in the vicinity of tunnels. For this purpose a quick solver in Fortran has been developed that performs variography analysis of 3D spatial data, fast kriging estimations of RMR between borehole sampling locations at the centroids of the elements of the numerical model, and model validation. For the purpose of an integrated underground excavation design, a step further is made by incorporating into the 3D mechanical numerical model of the rock mass, the three-dimensional (3D) solid geological model, thus coupling the geology with the ground (geotechnical) model (i.e. each element of the numerical model is assigned a geological material). The mechanical properties of each finite difference cell (or Representative Elementary Volume) of the ground model were then prescribed according to its geological type, the spatial heterogeneity of the rock mass expressed quantitatively with the kriging model, and the upscaling calculations of the mechanical properties of the intact rocks determined in the laboratory, based on the size-effect (strength dependence on size) and Damage Theory. Furthermore, a preliminary numerical simulation of the advance of unsupported tunnels in the model of the heterogeneous rock mass was performed for illustration purposes.     

Delft3D在鳌江口外平阳咀海域流场模拟中的应用

Dem3D是以FLOW水动力模块为主体，建立在Navier-Stokes方程的基础上，由一系列模块组成的模型软件，可以对水流、波浪、泥沙、水质、地貌等建立二、三维模型。本文介绍了Delft3D数值模拟软件的程序模块及数值理论基本方程．对鳌江口外平阳咀海域的流场进行了模拟研究。研究表明：计算结果与实测结果吻合较好，能够较好地反映该海区真实的流场情况．可以为工程研究提供基本的流场背景。     

滇中红层工程地质特性研究

介绍滇中红层形成的地质历史背景,红层分布范围,主要地层岩性及区内地质构造。重点讨论滇中红层特别是红层软岩的岩体原生结构,及后期受构造改造的岩体结构特性,岩体风化特性,岩体水理作用特性,岩体物理力学性质等四方面的工程地质特性。     

Controlled Fracture Growth by Blasting While Protecting Damages to Remaining Rock

Summary. Conventional blasting causes cracks and fractures in the rock. Controlled blasting techniques produce the macrocrack in a desired direction and eliminate microcrack in the remaining rock. Macrocrack development in desired direction is required for extraction of dimensional stone and at the same time there is need to reduce microcrack development in the block and remaining rock. To achieve the objectives, experimental work in the quarries was carried out for separating marble block from the in situ strata as practiced in some of the Indian mines by using detonating cord of 30 to 50 g/m by varying hole spacing, hole diameter, air cushioning, water and sand filled blast-holes. Blasthole notching was carried out. Further, tests were carried out by using various liners inside the blasthole to determine the damages in the extracted block and remaining rock. The designed experimental work was undertaken and rock samples were collected by coring before and after blasting for quantification of microcrack in the rock. P-wave velocity and microscopic studies were conducted for quantification of damages. Experiments were also conducted at laboratory scale for the quantification of damages in single circular and notched holes with variation of stemming and liners. The P-wave velocity close to hole always reduces after blast and in case of NG-based charge and detonating cord it decreases up to 1/3^rd. With PVC pipe and paper tube liners decrease is negligible. Thus, by using notched hole with paper tube, decrease in P-wave is minimum indicating least damage.     

Town of Tornio in November 1898: a rare survey of earthquake damage in Finland

This study investigates the effects of the Fennoscandian earthquake that occurred on 4 November 1898 (GMT) on Tornio in Northern Finland. The extra fire inspection conducted in the town on 21, 22 and 23 November 1898 provided insight into the failures caused by this low-magnitude earthquake. The building stock was of timber with masonry stone components. More than 30 heating units sustained damage. The macroseismic intensity in Tornio is estimated at I = 6 (European Macroseismic Scale).     

Energy demands for seismic design against low‐cycle fatigue

A seismic design procedure that does not take into account the maximum and cumulative plastic deformation demands that a structure is likely to undergo during severe ground motion could lead to unsatisfactory performance. In spite of this, current design procedures do not take into account explicitly the effect of low‐cycle fatigue. Based on the high correlation that exists between the strength reduction factor and the energy demand in earthquake‐resistant structures, simple procedures can be formulated to estimate the cumulative plastic deformation demands for design purposes. Several issues should be addressed during the use of plastic energy within a practical performance‐based seismic design methodology. Copyright © 2006 John Wiley & Sons, Ltd.