On the origin of oriented rutile needles in garnet from UHP eclogites

Although oriented rutile needles in garnet have been reported from several ultrahigh‐pressure (UHP) rocks and considered to be important UHP indicators, their crystallographic features including growth habit and lattice correspondences with garnet host have never been properly characterized. This paper presents a detailed analytical electron microscopic (AEM) study on evenly distributed oriented rutile needles in garnet of two eclogitic rocks from Sulu. Some garnet in one UHP diamondiferous quartzofeldspathic rock from the Saxonian Erzgebirge, and in one high‐pressure (HP) felsic granulite from Bohemia also contain a few unevenly distributed oriented rutile needles. They have also been studied for the purpose of comparison. Despite different distribution patterns, AEM revealed that all rutile needles are oriented along the 〈111〉 directions of garnet with their lateral sides surrounded by the {110} planes of garnet, and that the growth directions of most needles are close to the normal of the {101} planes of rutile. No other specific crystallographic orientation relationships between rutile and garnet host were observed, and there is no pyroxene associated with rutile, as necessitated by the precipitation reaction of rutile in garnet as previously proposed. A simple solid‐state precipitation scenario for the formation of the rutile needles in garnet in these two eclogitic rocks is not justified. Three alternative mechanisms are considered for the formation of oriented rutile needles: (i) the rutile needles may be inherited from precursor minerals; (ii) the rutile needles may be formed by a dissolution–reprecipitation mechanism; and (iii) the rutile needles may be formed by cleaving and healing of garnet with rutile deposition. None of these mechanisms can fully explain the observations, although the first one is less likely and the third one is preferred. This study presents an example where the presence of oriented/aligned inclusions in minerals does not necessarily imply a precipitation origin.     

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.     

Organic geochemistry and petrology of barren and Mo–Ni–PGE mineralized marine black shales of the Lower Cambrian Niutitang Formation (South China)

Marine black shales of the Lower Cambrian Niutitang Formation in southern China host Mo–Ni–platinum group elements (PGE) mineralization confined to a phosphate- and pyrite-rich stratiform body (max. 20-cm thick). The H/C atomic ratio, carbon isotopic composition, FTIR spectra of bulk organic matter, and spectra of extractable part of organic matter indicate similar sources and thermal evolution of organic matter in barren and mineralized black shales.The morphology and relative abundance of organic particles in barren and mineralized shales are different. In barren black shales, organic particles comprise only elongated bodies and laminae 2–10 μm across or elongated larger bodies (> 10 μm) with R_max = 2.96–5.21% (Type I particles). Mineralized black shales contain Type I particles in rock matrix (90–95 vol%), small veinlets or irregular organic accumulations (Type II particles, 1–5 vol%) that display weak to well developed mosaic texture and a variable reflectance (R_max = 3.55–8.65%), and small (< 1 to 5 μm) rounded or irregular Type III organic particles (1–4 vol%) distributed within phosphate nodules and sulphide rip-up clasts. Type III particles show similar reflectance as particles of Type I in rock matrix. Type I particles are interpreted as remnants of in situ bacterially reworked organic matter of cyanobacteria/algal type, Type II as solidified products or oil-derived material (migrabitumen), and Type III particles as remnants of original organic matter in phosphatized or sulphidized algal/microbial oncolite-like bodies. Equivalent vitrinite reflectances of Type I and III particles in barren and mineralized rocks are similar and correspond to semi-anthracite and anthracite. Micro-Raman spectra of organic particles in rocks display a wide belt in the area of 1600 cm^− 1 (G belt) and approximately the same belt in the area of 1350 cm^− 1 (D belt). The ratio of integrated areas of the two belts correlate with R_max values.The Mo–Ni–PGE mineralized body is interpreted as to represent a remnant of phosphate- and sulphide-rich subaquatic hardground supplied with organic material derived from plankton and benthic communities as well as with algal/microbial oncolite-like bodies that originated in wave-agitated, shallow-water, nearshore environment.     

Surface properties of stabilizing coastal dunes: combining spectral and field analyses

The coastal dunes of Israel have been undergoing a process of stabilization since 1948. One of the major features of this process is a change in the surface properties of the dunes – the development of a biological soil crust (BSC), and a change in the properties of the sand grains themselves. In Ashdod, at the southern coastal plain of Israel, sand properties that include the BSC, their fines (silt and clay) content and free iron-oxide (indicating their degree of rubification) have been analysed in detail using field and lab spectroscopy methods. In addition, sand erosion and deposition were measured using erosion pins to determine their effect on the presence of the above-mentioned factors. It was found that the BSC over these dunes is comprised of green algae that differs in its reflectance spectra from cyanobacterial crust, especially in the blue band. The crust was found to be particularly developed in the stable areas (mainly the interdunes) and on the north-facing slopes rather than on the south-facing slopes. A positive correlation was found between the crust fines and chlorophyll content, with stable areas showing more developed BSC. The stable areas showed also a lower albedo and slightly more developed reddish colour, indicating a slightly higher rate of rubification. This study demonstrates that the intensity of sand erosion/deposition rates affects soil properties, with the BSC being the fastest to react to the stabilization process (months to several years), followed by the content of fine particles (several years to a decade), whereas the rubification process is a much weaker marker and may need much longer time periods to develop (decades to centuries).     

Mineral magnetic and physical properties of surficial sediments and onshore samples from the southern basin of Lake Baikal, Siberia

Results of lithostratigraphic and mineral magnetic analysis of two surficial sediment cores (21 cm and 45 cm in length) collected from the Southern basin of Lake Baikal at a water depth of 1390 m, are presented. The sediments have been measured for a wide range of mineral magnetic parameters in order to assess their value in the identification of turbidite layers. Particle size and geochemical data are also presented and these explain some of the down core variations in magnetic mineralogy. It is suggested that changes in the particle size frequency distributions down core may be related to fossil diatom shells. One of the cores has been dated using ²¹⁰Pb. The sediment cores were cross-correlated using low frequency magnetic susceptibility (f) and these cores can also be correlated with a nearby core collected earlier in 1992. Changes in the magnetic parameters of lf, IRMs and HIRM₂₁₀ suggest that there are significant changes in the concentration of ferrimagnetic minerals in the sediment cores, indicating changing sediment sources and/or increasing concentrations of spheroidal carbonaceous particles and the dissolution of minerals through reduction below the oxidised layer within the sediment core.     

扫描电镜分析各类微体化石样品最佳镀膜的探讨

根据多年的工作经验和试验对比,总结出了非导电微体化石－放射虫,硅藻,竹节石,有孔虫,介形虫,轮藻,牙形石,海绵骨针等的最佳镀膜方法和最佳镀膜厚度。     

实验变形煤结构演化的电子顺磁共振研究

通过１４件高温高压实验样品及其原样的电子顺磁共振研究,论述了温度、压力、应力、应变速率和应变强度等是影响变形煤化学结构演化的重要因素,但在不同的煤级中和不同的实验条件下,各因素所起的作用是不同的。变形煤ＥＰＲ参数的演化与镜质组反射率的变化密切相关,并且具有较好的规律性。说明镜质组反射率是煤化学结构演化的外在反映,是煤田构造研究中极为重要的标志物之一。     

The C/CO ratio in B335 and the decaying dark matter neutrino hypothesis

C¹⁸O J  = 2–1, C¹⁷O J  = 2–1 and [C  I ] ³P₁–³P₀ emission from the dense cold cloud B335 has been observed and modelled in order to determine the C/CO ratio. The observed ratio is compared with a prediction by Tarafdar who assumes a mechanism in which the CO dissociation is caused by photons of energy ∼ 13.8 eV. These were postulated by Sciama to result from the decay of dark matter neutrinos. Our value for the C/CO ratio sets an upper limit to the strength of the neutrino decay dissociation process, thus providing a significant datum for interstellar chemistry theory.     

The Deutsch field gamma-ray pulsar – II. Application of the model

A new model for gamma-ray pulsars presented by Higgins & Henriksen is applied to the cases of the seven known gamma-ray pulsars. Those pulsars that are not presently observed in gamma-rays, but are candidates for observation by the next generation of gamma-ray telescopes, are discussed. The case of millisecond pulsars is discussed, and it is shown that these objects should radiate at detectable levels, in opposition to the predictions of other gamma-ray pulsar models.     

An application of Mie's series to soft particles

Summary The scattering of electromagnetic radiation from soft particles has been studied by a new method which allows to transform the Mie series into a simplified form through the use of some auxiliary expansions derived in the Appendix of this article. This simplified form (eq. 1) converts into the Hulst and Rayleigh-Debye-Gans' formulae if the parameters of eq. I are properly restricted. A further simplified form (eq. II), improves the well-known Hulst approximation.