不同生态系统CO2通量和浓度特征分析研究

本文利用1993～1994年日本国家农业环境研究所与中国科学院沙漠研究所合作在内蒙古奈曼地区实测的7种不同生态系统（沙丘、轻度放牧草原、中度放牧草原、重度放牧草原、无放牧草原、玉米田和大豆田）的净辐射、土壤热通量、两个高度的CO2浓度、温度、湿度和风速等资料，采用空气动力学方法，计算了CO2通量及其与环境和人为干扰因子的关系，并分析了不同下垫面的光合作用特征. 结果表明：各种下垫面CO2通量的共同特点是：在白天，CO2通量和梯度的输送方向是从大气向植被，在中午（11～13时）输送达到负的最大值； 在夜间，CO2通量和梯度输送方向与白天相反，是从植被向大气，在早晨（3～5时）达到正的最大值. 植被覆盖率及生物量不同的下垫面光合作用强度有明显差异，天气状况对光合作用也有一定影响.     

Variations of near-surface atmospheric CO2 and H2O concentrations during summer on Muztagata

Expeditions during the summers of 2002 and 2003 implemented continuous monitoring of near-surface (2 m height) atmospheric CO₂ and H₂O concentrations at the 4500 m elevation on Muztagata. The resultant data sets reveal a slight decrease of CO₂ concentrations (of about 5 μmol·mol^-1) and changes in the diurnal variations from the end of June to the middle August. The daily maximum CO₂ concentrations occur between 02:30-05:30 AM (local time) and the minimum levels occur between 12:00-15:30 PM. The atmospheric CO₂ concentrations in the summer of 2002 were around 5 μmol·mol^-1 lower than those during the same period of 2003, whereas the diurnal amplitude was higher. In contrast, we found that the daily mean atmospheric H₂O content in 2003 was much lower than that in 2002 and there exists a striking negative correlation between CO₂ and H₂O concentrations. We therefore suggest that the near-surface atmospheric CO₂ concentration is affected not only by photosynthesis and respiration, but also by the air H₂O content in the glaciated region around Muztagata.     

内蒙古东乌旗哈巴特盖银多金属矿土壤地球化学异常特征

哈巴特盖测区1／5万土壤地球化学测量发现了4个异常区，多元素组合异常多分布在黑云母二长花岗岩的内、外接触带上，土壤地球化学异常特征显示本区成矿是多期次的，多元素组合异常在露头矿和盲矿上方均有出现，且异常连续、浓集中心明显，异常的强度和规模大，呈带状、宽带状或面状产出。     

连拱隧道施工对洞口仰坡影响的三维数值分析

以江西某高速公路一浅埋偏压连拱隧道为例,采用Marc有限元程序对其出口段进行了动态施工的三维数值模拟。从施工过程中的应力集中、塑性区的分布形态和发展规律、仰坡轴向地表位移的分布特征等方面,系统研究了偏压连拱隧道施工对强风化岩体洞口仰坡的影响作用机制。结果表明:在模拟施工过程中塑性区和应力集中区只出现在洞体附近,可能的仰坡失稳往往是隧道施工失稳的累进性响应;洞口仰坡的轴向水平位移前缘大、后缘小,垂直位移后缘大、前缘小;隧道上方和近山脊一侧仰坡位移比近山谷一侧大,仰坡失稳往往从隧道上方和埋深较大一侧开始。     

闽西南古田-小陶花岗质杂岩体的形成时代和成因

古田-小陶花岗质杂岩体是由小陶、古田、华家、蛟洋和姑田等单元组成。小陶、古田和华家单元为含黑云母二长花岗岩,蛟洋和姑田单元是含角闪石黑云母石英二长岩。小陶和古田花岗岩以高 SiO_2(>71.77%)、K_2O(>4.67%)和低 CaO(<1.71%)为特征,属于弱过铝-强过铝花岗岩;它们含高的 Rb、Nh、Ta、Th、U 和低的 Sr、Ba 含量;稀土(REE)含量和轻重稀土分异((La/Yb)_N)变化大,分别变化于143×10~(-6)～548×10~(-6),和3.3～26.5,Eu 亏损中等到强。姑田和蛟洋单元都以低SiO_2(62.88%～66.38%)和高 Al_2O_3(15.44%～16.51%)为特征。姑田单元的 REE 总量低而蛟洋单元的 REE 总量高,但两者的 Eu 负异常都不明显。华家单元花岗岩的地球化学特征介于上述两组花岗岩之间。LA-ICPMS 锆石 U-Pb 定年显示小陶花岗岩形成于222±3Ma,而古田花岗岩形成于161±1Ma。小陶、古田和姑田花岗岩具有相似的~(87)Sr/~(86)Sr 初始比值(0.7089～0.7099)和ε_(Nd)(t)值(-11.1～-11.5),而且古田和小陶花岗岩的锆石 Hf 同位素组成也相似,表明它们起源于相同的源区。地球化学和 Sr-Nd-Hf 同位素指示它们的源区物质是具有1.73～1.5Ga 平均地壳存留年龄的变质沉积岩。而位于杂岩体南部的华家花岗岩显示明显高的~(87)Sr/~(86)Sr 初始比值(0.7310)和更低的ε_(Nd)(t)值(-16.4),指示它的母岩浆起源于古元古代壳源物质,暗示杂岩体南北基底组成可能不同。古田花岗岩形成于燕山早期的板内伸展构造背景,而小陶花岗岩形成于印支晚期,地球化学特征以及同时代岩石组合以及构造应力场分析表明其最可能形成于后造山构造背景。     

临安大气气溶胶理化特性季节变化

分别利用碳成分分析仪、离子色谱仪和原子吸收光谱仪等获取浙江省临安地区大气气溶胶在春、夏、秋、冬四季的质量浓度、离子与碳成分特性，并对不同粒径气溶胶成分分布特点作了较详细分析。结果表明:气溶胶质量浓度、可溶性离子浓度以及碳成分浓度具有明显的季节变化趋势。整个尺度范围内，气溶胶质量浓度季节变化特点为春季浓度最高，达到534 μg/m3；冬季次之，质量浓度为117.21 μg/m3；夏季浓度最低，平均为65.7 μg/m3；秋季质量浓度98.6 μg/m3。可溶性离子成分在气溶胶中所占比例具有明显的季节性，其中夏季最高为49.4%，春季最低为11.3%。硫酸根离子SO₄2-和氨根离子NH₄+和硝酸根离子NO₃- 3种离子浓度之和约占离子总量的75%~83%。受温度影响，硝酸根离子NO₃-浓度随季节变化幅度较大，夏季平均浓度为1.7 μg/m3, 冬季平均浓度为11.5 μg/m3，是夏季浓度的6.8倍。碳浓度分布特点显示，气溶胶中元素碳浓度春季最高，夏季最低。有机碳浓度春季最高，冬季最低。气溶胶粒度分布特点也非常明显。四季中粒径小于11 μm（PM₁₁）的气溶胶均占气溶胶总量的90%以上，粒径小于2.1 μm（PM_2.1）的气溶胶占到气溶胶总量的53%以上。可溶性离子在粒径小于2.1 μm气溶胶颗粒中，以硫酸根离子、氨根离子和硝酸根离子为主。碳成分尺度分布特征为颗粒越小，有机碳及元素碳浓度越高。     

Influence of diversion angle on water and sediment flow into diversion channel

Accumulation of the sediment in the stream of the diversion channels adversely affects its operational systems. Diversion channels are often constructed perpendicular to the main river. In this study, the water flow and sediment transport in the diversion channel with different angles were investigated in an attempt to maximize water discharge and minimize sediment discharge. A physical model with movable bed was used to simulate water and sediment flow with five diversion angles (θ) between (30°–90°). Moreover, three bed width ratios (B_r) (the relation between diversion to main channel bed width) between 30% and 50% and five total discharges between (7.25 L/s to 12.25 L/s) were considered for each case of (θ). The results showed, up to 10%, increasing in proportion discharge ratios for 30 and 45 diversion angles compared with 90° diversion angle. The results also showed that the lowest diversion sediment concentration was provided by the (θ) of 30°. Across all scenarios, the average proportion concentration reduction was 64%, compared with 90° diversion angle. Closer observation of the diversion system mechanism confirmed that decreased (θ) result in decreased sediment concentrations in the diversion channels. In conclusion, the diversion channel water and sediment discharge could be effectively managed by changing the (θ) to 30° or 45° instead of 90°.     

多点入流汇流计算法在北京城市洪水计算中的应用与研究

根据北京城市化水平,城市汇流特点,通过用多点入流汇流计算法模拟实测洪水过程线,分析了北京城市河道的汇流特点与规律,初步提出了一种适合于北京城市洪水计算的方法,为城市防洪排水工程规划,设计提供依据。     

Geochemical engineering; taking stock

Geochemical engineering makes use of optimized geochemical processes for the solution of environmental problems. It has developed in a few years from a collection of unrelated scientific and technological incidents into a coherent concept about how and where we can improve our geo-environment. All solutions to problems of pollution are based on neutralization/breakdown, concentration, dilution, isolation or immobilization, which serve to eliminate the pollutant, make it more manageable, or prevent its entry into the mobile phase, usually water, from which it can affect the biosphere. All of these solutions have their counterpart in nature, where many examples are found of high concentrations of potentially harmful substances. A major prerequisite of geochemical engineering solutions is that they should be compatible with the natural evolution of the system in its geo-environment. The advantages of this approach are that we can devise low-cost technologies (nature does most of the hard work itself), interfere least with nature, and quite often end up with useful by-products. Disadvantages are that technologies based on natural geochemical processes tend to be slow. The application of geochemical engineering concepts requires a better understanding of our environment and its ongoing processes than is necessary for a ‘classical' technology. In most environmental technologies the conditions are externally imposed on the system to be treated, and the natural evolution of the system is eliminated, or at best neglected. The concept of seeking a closer conformity with nature is paralleled in other disciplines like agriculture or the medical sector, where we see a similar evolution in the direction of techniques that are more in harmony with nature. Geochemical engineering brings many advantages, particularly in developing countries, or in countries where the state of the economy does not permit the introduction of expensive high-tech environmental technologies. So far, most of the applications of geochemical engineering concepts have focussed on solutions to environmental problems, but there are a number of cases where the environmental issue is more indirect, as e.g. in civil engineering. Geochemical engineering may be practised on a large, almost global scale, down to that of individual minerals, in accordance with the fact that geochemical processes also act on vastly different scales. An overview will be given of some of the problems that are being studied.     

地震前兆场的演化和能量非线性聚集的关系

运用非均匀介质中“非线性振动的局域能量聚集”过程,模拟唐山７．８级和大同６．１级地震的前兆场演化,发现地震孕育过程中出现的诸多前兆特征与地壳内构造能量的非线性聚集有关。